Quote:
Originally Posted by Luichenwai
Tuan, I would like a set. does it come with instructions? sorry im a bit of a Newbie with this stuff. But im Open to learning! :-)
How do I pay you and everything.. thanks.. PM me or reply back on here. :-)
|
No instructions. It's just simply bolting on bolts and nuts. Very easy to install, but takes time.. Just look at the pics for a guide..
The rear bar has 2 nuts supplied and you gotta take the OEM nut off of the rear strut. Then put the supplied one on. Put the strutbar bracket on, bolt back on the OEM nut. Put the bar on, tighten things up and you're done.
The front has 3 nuts, washer, and bolt. The nuts go under the frame. Use a socket tool for the nut so you can get it under the fender. You dont' have to jack up the car. There's a couple of round, black stickers that you peel off. The bolt goes there. Just line up the bracket, stick the socket tool with the nut on it and look into the hole to make sure the nut is aligned. Once aligned, put the bolt on by hand. Don't tighten until you get all three bolts bolted on. Tighten them up with you're done and bolt on the bar. Tighen up the bar and go take some corners!
If you need detailed photos, I'll be more than happy to take photos for you.
Hey Tuan,, I want some Aspec stickers... what size you have?
-Tomi