2nd Generation (GE 08-present)The New Fit... Generation specific talk and questions here.
Welcome to Fit Freak!
Welcome to Fit Freak,
You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, so please join our community today!
anyone got the bulb sizes for the 09 fits??
i know the *lightning* forum, there is a bulb application, but i believe those are for the 07-08
i need an application chart for 09
i want to clear out my parking and turn signal lights with hyper white bulbs
i also want to replace the dome light bulb with something brighter, it isnt bright enough!!!
any help guys?
thanks!
Sponsored Links
Registered users do not see this ad. Click here to register for free!
man, he already gave you the link to the site for the headlight parts..
hmm. i wonder if that site will also give the tails???
IT DOESNT GIVE U THE SIZE
it just tells u the wattage
hell i can give you the honda parts number if u want
but i need the AFTERMARKET part number
such as 7440, 7443, 1156, 1157
here u want the headlight part number for 9006/hb4? its 33116-s84-a11
what good does 33116-s84-a11 do at autozone? NO GOOD AT ALL
here i will even throw in a website that gives you all the honda part number including all the honda FIT accessories http://www.hondapartsdeals.com/
Looking at my own owners manual, it seems the tail light bulbs are NOT the traditional bayonet type, but the newer all glass type. You will need a dual contact one for your tail light and a single contact one for your turn signal (if it is separate, don't US cars flash the brake lights instead?).
That means you need 7443 for the tail light and 7440 for all the single circuit ones.
I don't know what the legalities regarding light colours are in Texas, but if your tail lights shine white and not red here in NSW you get defected. If you're keeping the original red lens you will be OK.
just email that autoillumination place and tell them what you're out to accomplish.
hope the driver that potentially rear-ends you doesn't get hurt since your tails will be clear, not RED...
you sir..have officially proven you can not read at all
i have never said i was going to clear all my whole tail lights
i wanted to clear out my turn signals and parking light
i never said i was going to clear out my brake lights
as far as im concerned, the turn signal lights are yellow and i want to clear that up to hyper white and that has nothing to do with braking
thank you..please try harder to make me look stupid next time without making your self look stupid
Looking at my own owners manual, it seems the tail light bulbs are NOT the traditional bayonet type, but the newer all glass type. You will need a dual contact one for your tail light and a single contact one for your turn signal (if it is separate, don't US cars flash the brake lights instead?).
That means you need 7443 for the tail light and 7440 for all the single circuit ones.
I don't know what the legalities regarding light colours are in Texas, but if your tail lights shine white and not red here in NSW you get defected. If you're keeping the original red lens you will be OK.
u seem like the only educated one here so far....
thanks for the info...but let look at some pictures..it will help better
i want size of the bulb on 14 and 2
those are the one that i want to be hyper whites
do you know the size of those two?
also the licnese plate bulb light size too if you can
and to the guy who gave me the bulbs for the headlight..what bout tail lights?
thanks
i CAN read, but i can't understand your post. so who's stupid?
you asked about the "tail lights". people who speak english in america refer to tail lights as "brake lights"; and "parking light" IS your brake light in the rear...
but yea, if you're thinking about changing tail lights, turn signals, etc. to white, hyper white or whatever... it's just plain stupid. not to mention unsafe.
i CAN read, but i can't understand your post. so who's stupid?
you asked about the "tail lights". people who speak english in america refer to tail lights as "brake lights"; and "parking light" IS your brake light in the rear...
but yea, if you're thinking about changing tail lights, turn signals, etc. to white, hyper white or whatever... it's just plain stupid. not to mention unsafe.
you stupid for not understanding
if you dont understand...ask questions..dont assume
=)
you didnt learn that in school?
there are also turn signals and reverse lights in the taillights also..not just brakes lights =)
i want size of the bulb on 14 and 2
those are the one that i want to be hyper whites
do you know the size of those two?
also the licnese plate bulb light size too if you can
thanks again
They're single filament so you'd need 7440. I'm pretty sure they are both a standard size. If you have a brighter one for your reversing lights than the original 16W I'm guessing you won't mind. The LED should draw less than this anyway.
Not sure whether the USDM fit has a white or orange turn signal lens at the back (mine is Australian Thai built Jazz and has white lens needing an orange globe). If the lens is orange, well and good, but if not you should get the amber type bulb rather than hyper white. Remember that being an LED I'm pretty sure that it actually stays white until it's lit, so your fashion sense is not offended . You really don't want your turn signals flashing white. If its for show, put them in for the show, but don't drive it on the street like that.
Licence plate bulb you will have to email the website and ask. It would help if you tell them as much as possible about the original bulb (ie 5W, wedge type)
They're single filament so you'd need 7440. I'm pretty sure they are both a standard size. If you have a brighter one for your reversing lights than the original 16W I'm guessing you won't mind. The LED should draw less than this anyway.
Not sure whether the USDM fit has a white or orange turn signal lens at the back (mine is Australian Thai built Jazz and has white lens needing an orange globe). If the lens is orange, well and good, but if not you should get the amber type bulb rather than hyper white. Remember that being an LED I'm pretty sure that it actually stays white until it's lit, so your fashion sense is not offended . You really don't want your turn signals flashing white. If its for show, put them in for the show, but don't drive it on the street like that.
Licence plate bulb you will have to email the website and ask. It would help if you tell them as much as possible about the original bulb (ie 5W, wedge type)
so they both are 7440?
but they look like two different size..wen i look at it..one if bigger than the other?
but 7440 will work for both?
One is turned sideways. That's why they look different. I'm pretty sure they don't make two wedge type globes that similar in size, even though they are different Watts.
Of course, you could always open it up and have a look...
One is turned sideways. That's why they look different. I'm pretty sure they don't make two wedge type globes that similar in size, even though they are different Watts.
Of course, you could always open it up and have a look...
ok thanks a lot for the help
i read up on the laws here in my state
i can have white turn signals in the front
but in the rear it has to be amber or red...i guess i will get the kind that is clear when off and amber when on
thanks for your help!
man, he already gave you the link to the site for the headlight parts..
. You really don't want your turn signals flashing white. If its for show, put them in for the show, but don't drive it on the street like that.
Linear Mode
