2nd Generation (GE 08-present)The New Fit... Generation specific talk and questions here.
Welcome to Fit Freak!
Welcome to Fit Freak,
You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, so please join our community today!
So I thought the Fit was dying for some yellow fogs. Picked up some vinyl from AZNCARBOS on these forums.
Made a template using the stock lights, install them using the Tint Method.
Wet the lens, and the film, slid them in place and used a blowdryer on HOT to smooth out the bubbles and dry up the water. Carefully wrapped them around the edges.
here are some pics:
one side done.
other side done.
Before
After
When lit
Sponsored Links
Registered users do not see this ad. Click here to register for free!
good although, the yellow bulb would have done the same but without the yellow lens look. Looks fine imo and this way you can buy cheap white bulbs and it will still look yellow :P
__________________
Daily grind and weekend warrior!
good although, the yellow bulb would have done the same but without the yellow lens look. Looks fine imo and this way you can buy cheap white bulbs and it will still look yellow :P
Can't beat the price, $7.50 shipped for 2 sheets, I only needed 1.
And I like the yellow look when off, plus a little extra protection for the fogs against rocks.
the reason why is because u wrapped the film all the way to the edge of the glass, leaving no place for the extra air to escape and will probably burn a brown spot right in the center of the film. I'd go back and trim off the excess to prevent it.
Sweet, but personally I'm kinda iffy on the yellow fog lights on the white car...I got TW too but have been debating whether or not it'd really look that great. I wanted to get some clear vinyl to protect it for sure though!
Do you know what kind/brand of material the stuff is? and how big are the sheets? I'd love to use that stuff (assuming he has colorless) for other things as well.
Do you know what kind/brand of material the stuff is? and how big are the sheets? I'd love to use that stuff (assuming he has colorless) for other things as well.
I'd buy the clear bra material if you were going after that, only because it would be clearer than the vinyl stuff. I was looking to use it on the side sills and rear corner edges where rocks will fly from the wheels.
you can buy the bulk sheets from invisibilemask.com
we have had heavy rain here for about 4 days straight and mine have already started bubbling up around the edges and have water in the bubbles. Oh well, I guess Ill order the bulbs and take the film off.
Linear Mode
