Fit FREAK.net

Go Back   Unofficial Honda FIT Forums > The Honda Fit and Jazz Forums > 2nd Generation (GE 08-present)

2nd Generation (GE 08-present) The New Fit... Generation specific talk and questions here.

Welcome to Fit Freak!
Welcome to Fit Freak,

You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, so please join our community today!


Reply
 
LinkBack Thread Tools Display Modes
  #61 (permalink)  
Old 04-25-2009, 01:16 PM
JDM_DOHC_SiR's Avatar
Super Moderator
iTrader: (49)
 
Join Date: Jan 2006
Location: San Diego, CA
Posts: 2,762
Rep Power: 35217985
JDM_DOHC_SiR relies on Rep Points to liveJDM_DOHC_SiR relies on Rep Points to liveJDM_DOHC_SiR relies on Rep Points to liveJDM_DOHC_SiR relies on Rep Points to liveJDM_DOHC_SiR relies on Rep Points to liveJDM_DOHC_SiR relies on Rep Points to liveJDM_DOHC_SiR relies on Rep Points to liveJDM_DOHC_SiR relies on Rep Points to liveJDM_DOHC_SiR relies on Rep Points to liveJDM_DOHC_SiR relies on Rep Points to liveJDM_DOHC_SiR relies on Rep Points to live
You don't need both door wire harnesses... but if you do it would be a plus.... the wire repair wires can be bought from your local Honda or Acura dealer... just make sure that you get the smallest size they sell.... they offer different lenghts... so if you want a longer wire that might be a plus... also don't for get about the switch for the mirrors too
__________________



2009 FG2 Civic Si
2009 GE8 Fit Sport
Reply With Quote
  #62 (permalink)  
Old 05-01-2009, 01:19 AM
niko3257's Avatar
FitFreak GE8 DIY Guy
iTrader: (2)
 
Join Date: Aug 2008
Location: Palm Coast FLA
Posts: 1,477
Rep Power: 42949675
niko3257 relies on Rep Points to liveniko3257 relies on Rep Points to liveniko3257 relies on Rep Points to liveniko3257 relies on Rep Points to liveniko3257 relies on Rep Points to liveniko3257 relies on Rep Points to liveniko3257 relies on Rep Points to liveniko3257 relies on Rep Points to liveniko3257 relies on Rep Points to liveniko3257 relies on Rep Points to liveniko3257 relies on Rep Points to live
any updates Dave?
Reply With Quote
  #63 (permalink)  
Old 05-01-2009, 03:46 PM
JDM_DOHC_SiR's Avatar
Super Moderator
iTrader: (49)
 
Join Date: Jan 2006
Location: San Diego, CA
Posts: 2,762
Rep Power: 35217985
JDM_DOHC_SiR relies on Rep Points to liveJDM_DOHC_SiR relies on Rep Points to liveJDM_DOHC_SiR relies on Rep Points to liveJDM_DOHC_SiR relies on Rep Points to liveJDM_DOHC_SiR relies on Rep Points to liveJDM_DOHC_SiR relies on Rep Points to liveJDM_DOHC_SiR relies on Rep Points to liveJDM_DOHC_SiR relies on Rep Points to liveJDM_DOHC_SiR relies on Rep Points to liveJDM_DOHC_SiR relies on Rep Points to liveJDM_DOHC_SiR relies on Rep Points to live
Yes.... just have to get 2 more wires and a switch installed this weekend
__________________



2009 FG2 Civic Si
2009 GE8 Fit Sport
Reply With Quote
  #64 (permalink)  
Old 05-04-2009, 04:07 AM
Member
iTrader: (0)
 
Join Date: Dec 2006
Location: Vancouver, BC, Canada
Posts: 46
Rep Power: 0
tdubl relies on Rep Points to livetdubl relies on Rep Points to livetdubl relies on Rep Points to livetdubl relies on Rep Points to livetdubl relies on Rep Points to livetdubl relies on Rep Points to livetdubl relies on Rep Points to livetdubl relies on Rep Points to livetdubl relies on Rep Points to livetdubl relies on Rep Points to livetdubl relies on Rep Points to live
Quote:
Originally Posted by niko3257 View Post
now it's finally done. test and put back together.




if anyone has any questions please let me know.
i don't think i missed anything but if i did i will add
to it if so.
enjoy everyone
hi im very curious about ur seat covers.. where did you get them and were they expensive? can you show me the way to aquire them thanx
Reply With Quote
  #65 (permalink)  
Old 05-04-2009, 11:19 AM
niko3257's Avatar
FitFreak GE8 DIY Guy
iTrader: (2)
 
Join Date: Aug 2008
Location: Palm Coast FLA
Posts: 1,477
Rep Power: 42949675
niko3257 relies on Rep Points to liveniko3257 relies on Rep Points to liveniko3257 relies on Rep Points to liveniko3257 relies on Rep Points to liveniko3257 relies on Rep Points to liveniko3257 relies on Rep Points to liveniko3257 relies on Rep Points to liveniko3257 relies on Rep Points to liveniko3257 relies on Rep Points to liveniko3257 relies on Rep Points to liveniko3257 relies on Rep Points to live
they are very cheap $35 i think it was.
you can get them at wally world.
they are just the fronts. i never got the backs.
Reply With Quote
  #66 (permalink)  
Old 05-09-2009, 08:45 PM
aenokea's Avatar
Member
iTrader: (1)
 
Join Date: May 2008
Location: hawaii
Posts: 116
Rep Power: 889448
aenokea relies on Rep Points to liveaenokea relies on Rep Points to liveaenokea relies on Rep Points to liveaenokea relies on Rep Points to liveaenokea relies on Rep Points to liveaenokea relies on Rep Points to liveaenokea relies on Rep Points to liveaenokea relies on Rep Points to liveaenokea relies on Rep Points to liveaenokea relies on Rep Points to liveaenokea relies on Rep Points to live
Quote:
Originally Posted by JDM_DOHC_SiR View Post
Yes.... just have to get 2 more wires and a switch installed this weekend

Hi Dave. I got my switch and the repair wires. Im ready to attempt my installation. Any updates for us?
Reply With Quote
  #67 (permalink)  
Old 05-11-2009, 11:02 AM
New Member
iTrader: (0)
 
Join Date: May 2009
Location: China
Posts: 4
Rep Power: 0
chipchan is an unknown quantity at this point
Talking

If the colors don't match, I think you can have it painted. I was told that some Honda dealers accept painting jobs for accessories these. This way, you can get the colors as close as the originals.

By the way, does anyone know if white LEDs are available for the turn signal lights (instead of the usual orange color)?

Thanks!




Chip of Honda Fit Factory
Reply With Quote
  #68 (permalink)  
Old 05-15-2009, 05:19 PM
Bryan-Guy-Status's Avatar
Member
iTrader: (0)
 
Join Date: May 2009
Location: CA
Posts: 118
Rep Power: 10049
Bryan-Guy-Status relies on Rep Points to liveBryan-Guy-Status relies on Rep Points to liveBryan-Guy-Status relies on Rep Points to liveBryan-Guy-Status relies on Rep Points to liveBryan-Guy-Status relies on Rep Points to liveBryan-Guy-Status relies on Rep Points to liveBryan-Guy-Status relies on Rep Points to liveBryan-Guy-Status relies on Rep Points to liveBryan-Guy-Status relies on Rep Points to liveBryan-Guy-Status relies on Rep Points to liveBryan-Guy-Status relies on Rep Points to live
Amazing!

Great DIY! I was looking at these mirrors last night from the same seller on eBay and was wondering what the instal would be like. Your are my savior! haha

How hard is it to remove the sport wing? Anyone know? I am looking to replace it with a Mugen Carbon one.
Reply With Quote
  #69 (permalink)  
Old 05-16-2009, 12:13 PM
JDM_DOHC_SiR's Avatar
Super Moderator
iTrader: (49)
 
Join Date: Jan 2006
Location: San Diego, CA
Posts: 2,762
Rep Power: 35217985
JDM_DOHC_SiR relies on Rep Points to liveJDM_DOHC_SiR relies on Rep Points to liveJDM_DOHC_SiR relies on Rep Points to liveJDM_DOHC_SiR relies on Rep Points to liveJDM_DOHC_SiR relies on Rep Points to liveJDM_DOHC_SiR relies on Rep Points to liveJDM_DOHC_SiR relies on Rep Points to liveJDM_DOHC_SiR relies on Rep Points to liveJDM_DOHC_SiR relies on Rep Points to liveJDM_DOHC_SiR relies on Rep Points to liveJDM_DOHC_SiR relies on Rep Points to live
Thumbs up

Quote:
Originally Posted by aenokea View Post
Hi Dave. I got my switch and the repair wires. Im ready to attempt my installation. Any updates for us?
YOur a special case... your install will be like mine was... sooooooooooo... PM me and I'll send you some thing you need..

I'll update this thread soon
__________________



2009 FG2 Civic Si
2009 GE8 Fit Sport
Reply With Quote
  #70 (permalink)  
Old 05-18-2009, 12:44 AM
aenokea's Avatar
Member
iTrader: (1)
 
Join Date: May 2008
Location: hawaii
Posts: 116
Rep Power: 889448
aenokea relies on Rep Points to liveaenokea relies on Rep Points to liveaenokea relies on Rep Points to liveaenokea relies on Rep Points to liveaenokea relies on Rep Points to liveaenokea relies on Rep Points to liveaenokea relies on Rep Points to liveaenokea relies on Rep Points to liveaenokea relies on Rep Points to liveaenokea relies on Rep Points to liveaenokea relies on Rep Points to live
Quote:
Originally Posted by JDM_DOHC_SiR View Post
YOur a special case... your install will be like mine was... sooooooooooo... PM me and I'll send you some thing you need..

I'll update this thread soon

you got a pm.
Reply With Quote
  #71 (permalink)  
Old 05-26-2009, 09:47 PM
Member
iTrader: (0)
 
Join Date: Dec 2006
Location: Vancouver, BC, Canada
Posts: 46
Rep Power: 0
tdubl relies on Rep Points to livetdubl relies on Rep Points to livetdubl relies on Rep Points to livetdubl relies on Rep Points to livetdubl relies on Rep Points to livetdubl relies on Rep Points to livetdubl relies on Rep Points to livetdubl relies on Rep Points to livetdubl relies on Rep Points to livetdubl relies on Rep Points to livetdubl relies on Rep Points to live
Quote:
Originally Posted by niko3257 View Post
now we can locate the blue and white wires that Dave let us
know about.
thanks Dave
look at the pics. white is at the top blue is at the bottom.




Blue is left +
white is right +


the negatives i put together.

then i bolted them to the hood release bracket.

now we can hook up the positive blue and white.
like so.



hi nooooB question here, and im planning to attempt this install

my one question how do i tell which yellow wire from the harness is +/- or does it not matter?
i understand what i quoted but im just curious when i extend the yellow wires which should be + and which should be -.

Last edited by tdubl; 05-26-2009 at 09:55 PM.
Reply With Quote
  #72 (permalink)  
Old 05-27-2009, 02:08 AM
niko3257's Avatar
FitFreak GE8 DIY Guy
iTrader: (2)
 
Join Date: Aug 2008
Location: Palm Coast FLA
Posts: 1,477
Rep Power: 42949675
niko3257 relies on Rep Points to liveniko3257 relies on Rep Points to liveniko3257 relies on Rep Points to liveniko3257 relies on Rep Points to liveniko3257 relies on Rep Points to liveniko3257 relies on Rep Points to liveniko3257 relies on Rep Points to liveniko3257 relies on Rep Points to liveniko3257 relies on Rep Points to liveniko3257 relies on Rep Points to liveniko3257 relies on Rep Points to live
Quote:
Originally Posted by tdubl View Post
hi nooooB question here, and im planning to attempt this install

my one question how do i tell which yellow wire from the harness is +/- or does it not matter?
i understand what i quoted but im just curious when i extend the yellow wires which should be + and which should be -.

i'll tell you the best way to tell. get yourself a 9 volt battery and try both
ways. only one way will work. the light will light up. then you will find out which is which.
then i used a black marker to mark my - negative. so later when you get
into the install you have no more trouble.
Reply With Quote
  #73 (permalink)  
Old 05-27-2009, 02:37 AM
aenokea's Avatar
Member
iTrader: (1)
 
Join Date: May 2008
Location: hawaii
Posts: 116
Rep Power: 889448
aenokea relies on Rep Points to liveaenokea relies on Rep Points to liveaenokea relies on Rep Points to liveaenokea relies on Rep Points to liveaenokea relies on Rep Points to liveaenokea relies on Rep Points to liveaenokea relies on Rep Points to liveaenokea relies on Rep Points to liveaenokea relies on Rep Points to liveaenokea relies on Rep Points to liveaenokea relies on Rep Points to live
Quote:
Originally Posted by niko3257 View Post
i'll tell you the best way to tell. get yourself a 9 volt battery and try both
ways. only one way will work. the light will light up. then you will find out which is which.
then i used a black marker to mark my - negative. so later when you get
into the install you have no more trouble.
Thats the best way to tell. I havent installed mine yet but sometimes I'll light 'em up just for fun.
Reply With Quote
  #74 (permalink)  
Old 05-27-2009, 09:23 PM
Member
iTrader: (0)
 
Join Date: Dec 2006
Location: Vancouver, BC, Canada
Posts: 46
Rep Power: 0
tdubl relies on Rep Points to livetdubl relies on Rep Points to livetdubl relies on Rep Points to livetdubl relies on Rep Points to livetdubl relies on Rep Points to livetdubl relies on Rep Points to livetdubl relies on Rep Points to livetdubl relies on Rep Points to livetdubl relies on Rep Points to livetdubl relies on Rep Points to livetdubl relies on Rep Points to live
Quote:
Originally Posted by niko3257 View Post
i'll tell you the best way to tell. get yourself a 9 volt battery and try both
ways. only one way will work. the light will light up. then you will find out which is which.
then i used a black marker to mark my - negative. so later when you get
into the install you have no more trouble.
thanx for the tip!
i was gonna do that but didnt have a 9v and was using a AA batt lol thank you again!
Reply With Quote
  #75 (permalink)  
Old 05-28-2009, 12:58 AM
niko3257's Avatar
FitFreak GE8 DIY Guy
iTrader: (2)
 
Join Date: Aug 2008
Location: Palm Coast FLA
Posts: 1,477
Rep Power: 42949675
niko3257 relies on Rep Points to liveniko3257 relies on Rep Points to liveniko3257 relies on Rep Points to liveniko3257 relies on Rep Points to liveniko3257 relies on Rep Points to liveniko3257 relies on Rep Points to liveniko3257 relies on Rep Points to liveniko3257 relies on Rep Points to liveniko3257 relies on Rep Points to liveniko3257 relies on Rep Points to liveniko3257 relies on Rep Points to live
Quote:
Originally Posted by aenokea View Post
Thats the best way to tell. I havent installed mine yet but sometimes I'll light 'em up just for fun.
common now. lets get them in this weekend and post up some pics
so we can all see.


Quote:
Originally Posted by tdubl View Post
thanx for the tip!
i was gonna do that but didnt have a 9v and was using a AA batt lol thank you again!
no prob
Reply With Quote
  #76 (permalink)  
Old 05-28-2009, 01:03 AM
aenokea's Avatar
Member
iTrader: (1)
 
Join Date: May 2008
Location: hawaii
Posts: 116
Rep Power: 889448
aenokea relies on Rep Points to liveaenokea relies on Rep Points to liveaenokea relies on Rep Points to liveaenokea relies on Rep Points to liveaenokea relies on Rep Points to liveaenokea relies on Rep Points to liveaenokea relies on Rep Points to liveaenokea relies on Rep Points to liveaenokea relies on Rep Points to liveaenokea relies on Rep Points to liveaenokea relies on Rep Points to live
[quote=niko3257;662823]common now. lets get them in this weekend and post up some pics
so we can all see.



Believe me I'm dying to get them on, but Im waiting for Dave's contribution so I can get mine to fold too. Im sure Dave will get that info to us soon.
Reply With Quote
  #77 (permalink)  
Old 05-28-2009, 01:13 AM
niko3257's Avatar
FitFreak GE8 DIY Guy
iTrader: (2)
 
Join Date: Aug 2008
Location: Palm Coast FLA
Posts: 1,477
Rep Power: 42949675
niko3257 relies on Rep Points to liveniko3257 relies on Rep Points to liveniko3257 relies on Rep Points to liveniko3257 relies on Rep Points to liveniko3257 relies on Rep Points to liveniko3257 relies on Rep Points to liveniko3257 relies on Rep Points to liveniko3257 relies on Rep Points to liveniko3257 relies on Rep Points to liveniko3257 relies on Rep Points to liveniko3257 relies on Rep Points to live
[quote=aenokea;662829]
Quote:
Originally Posted by niko3257 View Post
common now. lets get them in this weekend and post up some pics
so we can all see.



Believe me I'm dying to get them on, but Im waiting for Dave's contribution so I can get mine to fold too. Im sure Dave will get that info to us soon.


oh thats right you have the folding option. lucky bastards
do you at least have them mounted on the car?
that would be half the battle.
just extend all the wires and mark them.
then leave them under the dash till your ready.
cause man i can tell you getting all that wire you got through
that rubber tube. good luck. that was a pain in the ass.
i wish you luck.
can't wait to see them working

Dave ... calling Dave. hello

Last edited by niko3257; 10-01-2009 at 01:33 AM.
Reply With Quote
  #78 (permalink)  
Old 06-10-2009, 06:11 PM
justintime's Avatar
Member
iTrader: (1)
 
Join Date: May 2009
Location: USA
Posts: 292
Rep Power: 1723948
justintime relies on Rep Points to livejustintime relies on Rep Points to livejustintime relies on Rep Points to livejustintime relies on Rep Points to livejustintime relies on Rep Points to livejustintime relies on Rep Points to livejustintime relies on Rep Points to livejustintime relies on Rep Points to livejustintime relies on Rep Points to livejustintime relies on Rep Points to livejustintime relies on Rep Points to live
This is hot... so, where do we US folks get the mirror signal parts? I found none on eBay from the mentioned seller... also, are they possibly available in blue sensation?
Reply With Quote
  #79 (permalink)  
Old 06-23-2009, 12:11 AM
JDM_DOHC_SiR's Avatar
Super Moderator
iTrader: (49)
 
Join Date: Jan 2006
Location: San Diego, CA
Posts: 2,762
Rep Power: 35217985
JDM_DOHC_SiR relies on Rep Points to liveJDM_DOHC_SiR relies on Rep Points to liveJDM_DOHC_SiR relies on Rep Points to liveJDM_DOHC_SiR relies on Rep Points to liveJDM_DOHC_SiR relies on Rep Points to liveJDM_DOHC_SiR relies on Rep Points to liveJDM_DOHC_SiR relies on Rep Points to liveJDM_DOHC_SiR relies on Rep Points to liveJDM_DOHC_SiR relies on Rep Points to liveJDM_DOHC_SiR relies on Rep Points to liveJDM_DOHC_SiR relies on Rep Points to live
Quote:
Originally Posted by niko3257 View Post

Dave ... calling Dave. hello

OK OK... I'm back......... I'll have the required infor for the guys that have the folding oprion up in a day....
__________________



2009 FG2 Civic Si
2009 GE8 Fit Sport
Reply With Quote
  #80 (permalink)  
Old 06-23-2009, 01:13 AM
aenokea's Avatar
Member
iTrader: (1)
 
Join Date: May 2008
Location: hawaii
Posts: 116
Rep Power: 889448
aenokea relies on Rep Points to liveaenokea relies on Rep Points to liveaenokea relies on Rep Points to liveaenokea relies on Rep Points to liveaenokea relies on Rep Points to liveaenokea relies on Rep Points to liveaenokea relies on Rep Points to liveaenokea relies on Rep Points to liveaenokea relies on Rep Points to liveaenokea relies on Rep Points to liveaenokea relies on Rep Points to live
Quote:
Originally Posted by JDM_DOHC_SiR View Post
OK OK... I'm back......... I'll have the required infor for the guys that have the folding oprion up in a day....

Good to have you back Dave. Was beginning to get worried...
Reply With Quote
Reply

Tags
04320saaa00, 04321s5a307, 07, 2009, 76208tfoj11, diy, fit, honda, mirror, mirrors, number, part, signal, signals, turn, winkers

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
Parts # for Honda Insight's turn signal mirrors Choro-Q_Fit 2nd Generation (GE 08-present) 1 03-25-2009 01:22 AM
Turn signal switch problem, flashes high beams dhk General Fit Talk 9 11-20-2008 12:29 PM
JDM Power Mirrors w/ Turn Signal for USDM Fit - **Ebay** BigBadMadMan Fit Exterior Modifications & JDM Styling 2 04-03-2008 07:56 PM
Side mirrors with turn signal tiF adnoH AJ-Racing.com 33 04-21-2007 12:36 AM
Wanted: Turn signal mirrors wayneandjudy General Fit Talk 6 06-18-2006 05:24 PM

 
Go


All times are GMT -4. The time now is 12:14 PM.

Powered by vBulletin® Version 3.7.3
Copyright ©2000 - 2009, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.2.0