What did you do to your GE fit today?
damn, wish i had that on my GD. was running aftermarket steering wheel with spacers since the car didnt have telescopic steering wheel. problem was the shifter was kinda far. lol
^^ Thanks brother! They do make the inside a little nicer and they're full on replacements.
For sure a job when you have a little extra time. You need to remove the whole door panel and remove all the screws that hold the arm rest portion in place. Then the switch covers swing forward and pop out, you'll see what I mean once you start the project.
For sure a job when you have a little extra time. You need to remove the whole door panel and remove all the screws that hold the arm rest portion in place. Then the switch covers swing forward and pop out, you'll see what I mean once you start the project.
^^ Thanks brother! They do make the inside a little nicer and they're full on replacements.
For sure a job when you have a little extra time. You need to remove the whole door panel and remove all the screws that hold the arm rest portion in place. Then the switch covers swing forward and pop out, you'll see what I mean once you start the project.
For sure a job when you have a little extra time. You need to remove the whole door panel and remove all the screws that hold the arm rest portion in place. Then the switch covers swing forward and pop out, you'll see what I mean once you start the project.
That'll be the best time since you have to remove the door panels anyway. Just be careful on the rear doors, there's a small rectangular plastic piece at the top by the window that needs to be removed, I broke a clip on it and had to replace it, only a $5 piece.
I have a few other mods, but I'm keeping that under wraps until the next meet.
I have a few other mods, but I'm keeping that under wraps until the next meet.
That'll be the best time since you have to remove the door panels anyway. Just be careful on the rear doors, there's a small rectangular plastic piece at the top by the window that needs to be removed, I broke a clip on it and had to replace it, only a $5 piece.
I have a few other mods, but I'm keeping that under wraps until the next meet.
I have a few other mods, but I'm keeping that under wraps until the next meet.
I also recently found this angled extension recently. For the longest time I couldn't find angled extensions in 10x1.5 that weren't overpriced.
http://www.ebay.com/itm/10x1-5-3-5-Bend-Shifter-Shift-Knob-Extension-3-5-inches-3-5-in-extender-m10-/281183000268?pt=Motors_Car_Truck_Parts_Accessories&hash=item4177d016cc
Just in case someone doesn't need that much adjustment and doesn't have $90 to spend.
I am happy with my $6 ebay straight extension lol has been on for a long while and not broken yet, so, good enough.
That Tegiwa piece is really nice though.
http://www.ebay.com/itm/10x1-5-3-5-Bend-Shifter-Shift-Knob-Extension-3-5-inches-3-5-in-extender-m10-/281183000268?pt=Motors_Car_Truck_Parts_Accessories&hash=item4177d016cc
Just in case someone doesn't need that much adjustment and doesn't have $90 to spend.
I am happy with my $6 ebay straight extension lol has been on for a long while and not broken yet, so, good enough.
That Tegiwa piece is really nice though.
Nice Veilside! Still love mine. Every once in a while I'll take it off and either just put the knob on (with the Revo shorty) or put one of my straight or angled extenders on. I only leave it like that for a day before putting the Tegiwa back on, though. It's just too perfect. So last time I put it back on I used some red LocTite, a) to deter myself from ever thinking about taking it off again, and b) because I've had the Tegiwa come loose a couple times during shifting.
I know my recent posts have been more complaints and I'm sure some folks see it as bitchy/whiny crap about "trivial" matters...
Here's another one:
Long story, short... woman forced her way onto the road from her driveway. I stopped. Another man backed into me from his driveway.
Here's another one:
Long story, short... woman forced her way onto the road from her driveway. I stopped. Another man backed into me from his driveway.
I slapped on the sticker on for now but I ordered the SOHC ones so when that arrices I'll swap it out. I'm not that knowledgeable when it comes to cars. (my main hobby is djing) but til then I'll have these decals on. thanks for the heads up guys! I dont know much like i said but hopefully by posting/streaming through this forum I'll learn thing or two in awhile.
My JDM Modulo front lips....
Hello Guys
Recently installed my JDM Modulo front lips...
NOW
BEFORE
Luis
Honda Fit Sport 2013 - Vortex Blue Pearl
Recently installed my JDM Modulo front lips...
NOW
BEFORE
Luis
Honda Fit Sport 2013 - Vortex Blue Pearl
Last edited by luismycorreo; 09-22-2014 at 09:08 PM.
Next projects...
...after install the Mugen Rear Underbody Spoiler, I'll try to install the Rear Brake LED for a 2012 Scion FR-S ...
Luis
Honda Fit Sport 2013 - Vortex Blue Pearl
Luis
Honda Fit Sport 2013 - Vortex Blue Pearl
...after install the Mugen Rear Underbody Spoiler, I'll try to install the Rear Brake LED for a 2012 Scion FR-S ...
Luis
Honda Fit Sport 2013 - Vortex Blue Pearl
Luis
Honda Fit Sport 2013 - Vortex Blue Pearl
Hello Guys
Recently installed my JDM Modulo front lips...
NOW
BEFORE
Luis
Honda Fit Sport 2013 - Vortex Blue Pearl
Recently installed my JDM Modulo front lips...
NOW
BEFORE
Luis
Honda Fit Sport 2013 - Vortex Blue Pearl
Last edited by xxryu139xx; 09-22-2014 at 10:19 PM.
Took the 2013 in for an oil change. The car is at 24,xxx km and it only had one oil change? The first one was when the indicator got to about 20% and now at 24,xxx km its at 40% still!! I figure it's cheap maintenance so I took it to a quick lube and put in Castrol Edge 0W-20. I don't have a probably taking the car in to Honda for the next service. I assume it would be at least another 7,000 km.
The lube centre checked various things. The air filter is a little bit dirty so I will change that at Honda next. They wanted $40 at this Mr. Lube. The guys asked if can check the cabin filter and I told him I will get that at the dealer. He asked if I want an engine flush and surely I said no. Anyways I feel better now that at almost 25,000 km the Fit had it's 2nd oil change.
The lube centre checked various things. The air filter is a little bit dirty so I will change that at Honda next. They wanted $40 at this Mr. Lube. The guys asked if can check the cabin filter and I told him I will get that at the dealer. He asked if I want an engine flush and surely I said no. Anyways I feel better now that at almost 25,000 km the Fit had it's 2nd oil change.