So You Think You Know Your GE8? - Page 2

mugen666 · #21 (**permalink**) 10-14-2009, 01:35 AM

So, whoever gets number two wins, I guess.

I thought that would be an easy one as there is no other part that even comes remotley close to it.

The picture is not in focus which doesn't help. Hint: look at the contour of the area below the metal piece.

cbs1013 · #22 (**permalink**) 10-14-2009, 02:35 PM

Its the piece that the door speakers screw into. Too easy...

mugen666 · #23 (**permalink**) 10-14-2009, 02:55 PM

Quote:

Originally Posted by cbs1013

Its the piece that the door speakers screw into. Too easy...

Yay............ you win!

with help from the others, of course. Unless you can honestly say you could have guessed the other ones on your own.

Anyway............ +rep for you.

EDIT: I did rep you, but I guess it won't show up until I get 50 posts. Something like that. Once that happens and you don't get rep points, I will add them later.

REVTEC · #24 (**permalink**) 10-14-2009, 06:48 PM

I didn't read all of the posts, but I'm going to take a few guesses.
#1 is a Honda Fit Airbox.
#2 is the hole that Luke has to fire the torpedos in to blow up the Death Star.
#3 is a VTEC Sundial.
#4 is a white styrofoam block attached to a large grey styrofoam block.
#5 is the trench on the Death Star that Luke had to fly in while being shot at by Vader.

How'd I do? BTW I just watched Star Wars!

cderalow · #25 (**permalink**) 10-14-2009, 07:27 PM

Quote:

Originally Posted by TaffetaWhite

I have a question about air flow direction and arrows. They don't make sense.

If the arrow points down, does that mean that the air flow should originate at the base of the arrow and exit through the top of the pointy part of the arrow?

Or, should the air enter where the arrow is pointing?

There are arrows on my fan air filters. I figured it has to be the base of the arrow where the air is to enter, which puts the reinforced side where the air exits. Making the entry point have more filter coverage than would be present on the other side with the metal/cardboard reinforcement.

Someday I hope to have a lobotomy so I won't have to try to figure out air filters. It would be nice not to see everything from a multiple standpoint.

the arrow on the filter should line up with the arrow on the tray/drawer.

really, it starts at big end and flows towards small end.

mugen666 · #26 (**permalink**) 10-14-2009, 07:38 PM

Quote:

Originally Posted by REVTEC

I didn't read all of the posts, but I'm going to take a few guesses.
#1 is a Honda Fit Airbox.
#2 is the hole that Luke has to fire the torpedos in to blow up the Death Star.
#3 is a VTEC Sundial.
#4 is a white styrofoam block attached to a large grey styrofoam block.
#5 is the trench on the Death Star that Luke had to fly in while being shot at by Vader.

How'd I do? BTW I just watched Star Wars!

Pretty close.

#1 is the cover for the Flux Capacitor.......... wait........ wrong movie.

mugen666 · #27 (**permalink**) 10-14-2009, 07:40 PM

Next set. More of the same. Some easy, some difficult. This time, just copy and paste below text and go from there. I will not say anything until someone gets all 5 together.

1.
2.
3.
4.
5.

cderalow · #28 (**permalink**) 10-14-2009, 07:55 PM

Quote:

Originally Posted by mugen666

Next set. More of the same. Some easy, some difficult. This time, just copy and paste below text and go from there. I will not say anything until someone gets all 5 together.

1.
2.
3.
4.
5.

pictures ?

mugen666 · #29 (**permalink**) 10-14-2009, 07:59 PM

Now the pics..............

Number One.

Number Two.

Number Three.

Number Four.

Number 5.

Damn......... these are easy. Next set will be more challenging.

mugen666 · #30 (**permalink**) 10-14-2009, 08:01 PM

I'm gonna take the camera out and get some really tough ones. I keep forgetting to take shots from far away and zoom in so pics are in better focus. <---------- bad grammar, LOL.

cderalow · #31 (**permalink**) 10-14-2009, 08:07 PM

1) fuse box plug
2) isolator for underhood fuse box
3) power mirror plug
4) vent gasket in the back of the trunk
5) back side of the center console?

Goobers · #32 (**permalink**) 10-14-2009, 08:22 PM

I think #1 looks more like the plug that goes into the radio (wiring harness).

I was surfing online yesterday on aftermarket HUs.

Gah... still trying to buy a Fit... sigh.

mugen666 · #33 (**permalink**) 10-14-2009, 11:53 PM

Oh boy, I want to say something, but it won't be fair. cderalow, you've got a long way to go.

EDIT: Yay........... I got my rep points to show up!

TaffetaWhite · #34 (**permalink**) 10-15-2009, 12:39 AM

1. Auxiliary chick power supply. For the blow dryer, curling iron, leg waxer, skin buffer, lip gloss dispenser, etc.
2. Cabin perfume release valve
3. Space, the final frontier, as seen through the window of space shuttle Fit, with really big plug to catch the cosmic energy stuff. Note Milky Way edge on left of photo.
4. The place to store 6 rolls of the TissueKlean™ made in France.
5.The underside of a Tooth Bucket before it macks you on the forehead:

A very rare Fit accessory.
Different sizes and other modifi

mike2100 · #35 (**permalink**) 10-15-2009, 01:58 PM

Quote:

Originally Posted by TaffetaWhite

1. Auxiliary chick power supply. For the blow dryer, curling iron, leg waxer, skin buffer, lip gloss dispenser, etc.
2. Cabin perfume release valve
3. Space, the final frontier, as seen through the window of space shuttle Fit, with really big plug to catch the cosmic energy stuff. Note Milky Way edge on left of photo.
4. The place to store 6 rolls of the TissueKlean™ made in France.
5.The underside of a Tooth Bucket before it macks you on the forehead:

A very rare Fit accessory.
Different sizes and other modifi

it might be easier if the pics weren't super blurry

jnesselroad · #36 (**permalink**) 10-15-2009, 02:15 PM

1. head unit harness
2.radiator stay
3.power mirror plug
4.piece inside door to cover the holes in the metal (idk what to call it)
5. wire loom

mugen666 · #37 (**permalink**) 10-15-2009, 05:52 PM

Quote:

Originally Posted by jnesselroad

1. head unit harness
2.radiator stay
3.power mirror plug
4.piece inside door to cover the holes in the metal (idk what to call it)
5. wire loom

Oh, oh, oh......................... not quite. So close it's not funny.

Goobers · #38 (**permalink**) 10-15-2009, 06:07 PM

Is #4 where the front speakers go?

jnesselroad · #39 (**permalink**) 10-15-2009, 06:09 PM

Quote:

Originally Posted by Goobers

Is #4 where the front speakers go?

that's what i thought. it looks like where they put the lock control unit on the old eg's. behind the door panel, and that plate recesses back into the door.

cbs1013 · #40 (**permalink**) 10-15-2009, 08:39 PM

Quote:

Originally Posted by jnesselroad

that's what i thought. it looks like where they put the lock control unit on the old eg's. behind the door panel, and that plate recesses back into the door.

You were pretty much right, its the piece built into the vapor barrier on the front right door, and it recedes back into the frame of the door.
Only pic I have,

That piece goes where the sheet metal is on my car, i got rid of it and sealed it up.