Please help with TSX Homelink install on a GE8 base
#1
02-13-2012, 04:16 PM
Please help with TSX Homelink install on a GE8 base
Quote:
Originally Posted by Zalthras
Harness Wiring
Connections that need to be made, two of which are pin transfers from the TSX maplight:
First we’ll start with the wiring connections that will be made between the Homelink and Maplight units themselves (Chassis GND & Intermediate GND). Flip over the maplight you just removed from your Fit.
Now put everything back together.
***IMPORTANT - Remember that the Homelink’s GND is through the mounting bolt, so test after the base is bolted back into the ceiling***
Do I connect TheTsx homelinlk Grn/red and green to the fit Blue switched ground wire ? or where do you connect the Tsx homelinlk green wire to
Thanks for any help.
__________________
Originally Posted by Zalthras
Harness Wiring
Connections that need to be made, two of which are pin transfers from the TSX maplight:
First we’ll start with the wiring connections that will be made between the Homelink and Maplight units themselves (Chassis GND & Intermediate GND). Flip over the maplight you just removed from your Fit.
Now put everything back together.
***IMPORTANT - Remember that the Homelink’s GND is through the mounting bolt, so test after the base is bolted back into the ceiling***
Do I connect TheTsx homelinlk Grn/red and green to the fit Blue switched ground wire ? or where do you connect the Tsx homelinlk green wire to
Thanks for any help.
__________________
Thread
Thread Starter
Forum
Replies
Last Post
dela
2nd Gen GE8 Specific Fit Interior Modifications Sub-Forum
94
08-31-2023 12:04 PM
-hurley18
2nd Gen GE8 Specific Fit Engine Modifications, Motor Swaps, ECU Tuning Sub-Forum
2
10-24-2011 02:19 PM
