2nd Generation GE8 Specific Exhaust System Sub-ForumThreads discussing exhaust related topics including headers, cats/test pipes, b-pipes, cat-back & axle-back systems on the 2nd generation Honda Fit (GE8)
Welcome to Fit Freak!
Welcome to Fit Freak,
You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, so please join our community today!
i had just bought a fit and love it.. im trying to get an exhaust for it and no not much about the exhaust i want. i was thinking about an hks but no not much about it.
what should i look into wid a nice/clean sound thats loud and increases my power..??
Sponsored Links
Registered users do not see this ad. Click here to register for free!
I would wait till it rusts and you have to replace it and get a good magnaflow stainless steel cat back exhaust and that will be the last time you will have to mess with the exhaust and the magnaflow don't sound like a tin can.
our other car came the mazda 3 came with a stainless steel exhaust so hopefully we will never have to replace the exhaust. some other manufactures are doing it too like gm. wish honda would start doing it.
I would wait till it rusts and you have to replace it and get a good magnaflow stainless steel cat back exhaust and that will be the last time you will have to mess with the exhaust and the magnaflow don't sound like a tin can.
our other car came the mazda 3 came with a stainless steel exhaust so hopefully we will never have to replace the exhaust. some other manufactures are doing it too like gm. wish honda would start doing it.
would you recomend a magna flow over tanable or a buddy club exhaust??
searching is your friend.... theres plenty of links to clips of what they sound like and such. just remember exhausts sound different on every car. im planning on getting an hks hi power.
searching is your friend.... theres plenty of links to clips of what they sound like and such. just remember exhausts sound different on every car. im planning on getting an hks hi power.
really, i was thinking about a highpower aswell, but after reading everything, i feel that there not loud enough. i read someone wrote that hks sound no louder than a stock 350z exhausttt... truee??
lol, he's from cypress, california. his exhaust is not going to rust.
it's up to you man, some people like the sound and attention that comes with a loud aftermarket exhaust, while other have outgrown it and don't enjoy increased attention from cops and the general public.
the hks axleback is a pretty quiet exhaust for aftermarket exhaust standards. it doesn't drone at cruising rpm so you shouldn't get too sick of it.
also, axleback refers to the exhaust replacing a portion from the axle-back. which in the case of the honda fit, is just the muffler and a little bit of piping. cat means the catalytic converter and back. like fitting said, i just don't know if you know that "Cat" is short for catalytic converter.
Last edited by doctordoom; 08-26-2009 at 02:43 AM.
really, i was thinking about a highpower aswell, but after reading everything, i feel that there not loud enough. i read someone wrote that hks sound no louder than a stock 350z exhausttt... truee??
loudness isn't what is desired sound quality is what you want
I have a magnaflow RACE muffler on my car and it's quieter than my friends stock buick century haha
lol, he's from cypress, california. his exhaust is not going to rust.
it's up to you man, some people like the sound and attention that comes with a loud aftermarket exhaust, while other have outgrown it and don't enjoy increased attention from cops and the general public.
the hks axleback is a pretty quiet exhaust for aftermarket exhaust standards. it doesn't drone at cruising rpm so you shouldn't get too sick of it.
also, axleback refers to the exhaust replacing a portion from the axle-back. which in the case of the honda fit, is just the muffler and a little bit of piping. cat means the catalytic converter and back. like fitting said, i just don't know if you know that "Cat" is short for catalytic converter.
thanks alot man.. how do you feel about a catback tanable exhaust/???
tanabe only makes axle backs, as do most manufacturers.
companies /w catbacks, skunk2, dc sports, invidia, buddy club (i think) there are more but those are all i can think of off the top of my head right now
tanabe only makes axle backs, as do most manufacturers.
companies /w catbacks, skunk2, dc sports, invidia, buddy club (i think) there are more but those are all i can think of off the top of my head right now
where can i find a buddy club, i was thinking about it.. and not sureee.. what do you feel about it?? and how much does it go for?
exhaust for a new fit?!
Linear Mode
