2nd Generation GE8 Specific Fit Photos & Videos Sub-ForumThreads for displaying photos and videos of the 2nd generation GE8 Honda Fit
Welcome to Fit Freak!
Welcome to Fit Freak,
You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, so please join our community today!
Hey SpoonFitGD3... thanks for the updated pictures. What size and offset are those Volk CE28Ns you have on your car? I think they're 16" because they have 8 spokes but what offset? I believe someone already asked you that before in another thread but I never saw an answer. Thanks.
__________________ 2009 Fit Sport Manual Transmission Super Sexy Metallic
This has been the greatest Fit 09 in Bangkok so far, the car was from the honda motor in Japan and I meant he ordered the car in Japan, got her mod at J's Racing and imported it back to Bangkok. All parts are geniune J's racing parts. The car and mod cost him around 2 millions THB which is around 57k US$....
Even now yellow is still not available in Thailand so this is the one and only stock fit 09 in yellow in Thailand. This is what make this car so special. I've seen the real one when I went to a JDM meet in Jan 09....This is sooooo beautiful.
I've seen some questions in the treads but I think I can answer some for your guys. First the Front wheel offset is +43 and rear is +48 and they are 16" wheels (If i'm not wrong, I read it from somewhere that it's J's racing spec)
Second, I think this isn't the stock height. I think this baby has J's racing suspension (shock up & spring) So the height can't be adjust....It doesn't look that low in the pic though..I agree that it would look a lot better if he can lower it a little bit but roads in Thailand are not as good as the state's. So it's not worthing risking the J's front skirt i'm afraid.
This has been the greatest Fit 09 in Bangkok so far, the car was from the honda motor in Japan and I meant he ordered the car in Japan, got her mod at J's Racing and imported it back to Bangkok. All parts are geniune J's racing parts. The car and mod cost him around 2 millions THB which is around 57k US$....
Even now yellow is still not available in Thailand so this is the one and only stock fit 09 in yellow in Thailand. This is what make this car so special. I've seen the real one when I went to a JDM meet in Jan 09....This is sooooo beautiful.
I've seen some questions in the treads but I think I can answer some for your guys. First the Front wheel offset is +43 and rear is +48 and they are 16" wheels (If i'm not wrong, I read it from somewhere that it's J's racing spec)
Second, I think this isn't the stock height. I think this baby has J's racing suspension (shock up & spring) So the height can't be adjust....It doesn't look that low in the pic though..I agree that it would look a lot better if he can lower it a little bit but roads in Thailand are not as good as the state's. So it's not worthing risking the J's front skirt i'm afraid.
$57K US? Are you kidding? I sell J's Racing parts and don't see that figure unless you are also calculating the vehicle and the shipment to BKK. All of the mods appear to be cosmetic. Were there engine mods done as well?
I bet this car sits in a showroom all day and is waiting for a buyer to pick it up.
__________________ J's Racing Dealer____________________________________________ ____
Fuk $57K!!!!! I wouldn't think about buying a Fit that much...then again when I was in Vietnam all the cars were mark up like crazy like the Fit it was about $30k over there.....
Can somebody point me in the right direction on where to get some of these parts? I've only seen a few mods for the GE so far.
You have to do the JDM conversion first on your GE. Most of these parts won't fit your USDM GE except for the wing, exhaust, and some of the reinforcement bars. I can help you with the later.
JDM GE conversion is approx. $10K. Then you can replicate the GE on this thread.
__________________ J's Racing Dealer____________________________________________ ____
$57K US? Are you kidding? I sell J's Racing parts and don't see that figure unless you are also calculating the vehicle and the shipment to BKK. All of the mods appear to be cosmetic. Were there engine mods done as well?
I bet this car sits in a showroom all day and is waiting for a buyer to pick it up.
That57K us$ includes J's part, the price of the vehicle, and shipment. Don't forget that in Thailand car price is extremely high due to 200% charge from the government. J's parts alone won't cost you this much. I'm not sure about engine though, probably no major mods.
You just lost the bet man! This is used in daily life but not often though and it's the owner who imported this cat not a dealer. He also owns a GD3 Spoon, and CR-V gen2 Spoon.
Last edited by spoon mania#1; 02-22-2009 at 07:23 PM.
Linear Mode
