Quote:
Originally Posted by ezduzit
You might not have the boot pushed as far as it will go on the TB. There is a small tab on the TB that the boot should sit flush with.
All it takes is just pushing the boot on a little farther to create enough slack to eliminate that angle on the sensor.
ez
|
Oh its all the way on there, believe me... one of the perks of my job, working on environmental systems of aircraft. Some ducts are connected together with rubber or silicone boots... guess i'm just one of the lucky ones that doesnt have any slack in the wiring. Going to get that other duct today to see if it gives me a little more slack.