Quote:
Originally Posted by Mr08FiT
Ok, well I'll start out by saying the products were great from the welds to the industrial seran wrap over the resonater to the indestructable packaging. Now, I had a little miss-hap with the install so it took a little longer than it normally should. But once the Cat Delete and B-Pipe were installed, lets just say that there will be no second guessing when I'm home. This exhaust i.m.o. is extremely loud, as in 1/4 throttle to 3,000~RPM and you're already at the N.A.S.A. shuttle launch. Stay in gear partial throttle and that constant flow of fuel calms it down to a whisper, once you're off the throttle "LOUD", coming up to speed "LOUD". Now this is not a bash on A-spec, their parts, or them period. It's just simply a loud straight through design. Needless to say I'm very happy with everything, Tuan, and A-spec in general...... will I be looking for a 3.5" silencer to shove into that N1 style muffler? Yes. But until then, I'm just one guy annoying the world a gear at a time... LOL.
Thanks for the exhaust Tuan!
Scott H.
|
Hahah I though you said you can handle the loudness? Its all good, like I said its not going to be quite. What you did was removed everything, cat, and muffer. All you have now is a stright pipe, which will be loud! If you put a silencer in it, its going to have a nasty sound coming from it, like a lot more BUZZing, higher pitch then a deeper tone. You might not even like it!
If we made a silencer, you would have to still drill a hole on the A Spec Axle-back to even use it. Originally we were just making the muffer itself, next thing you know everyone wanted everything else (B-pipe, Headers, Cat-delete). We were just going to stop at the axle-back and intake only. But we're here now, we have to check and see if we can make a silencer, that size.
Let keep you posted on it!
Thanks Scott,
Tuan @ A Spec.