Aftermarket parts for GK5!!

Thread Tools
 
Search this Thread
 
  #1  
Old 02-01-2015, 10:59 PM
Nikoatnite's Avatar
New Member
Thread Starter
Join Date: Jan 2015
Location: Fresno
Posts: 17
Aftermarket parts for GK5!!

Hello yall, I cannot seem to find a website that carries lips, spoilers, side skirts, etc. Can anyone refer me to an American website (or any legitimate website that delivers to the U.S) that carries lips, etc. etc.?
 
  #2  
Old 02-01-2015, 11:17 PM
Myxalplyx's Avatar
Member
5 Year Member
Join Date: May 2014
Location: Delaware
Posts: 1,918
Originally Posted by Nikoatnite
Hello yall, I cannot seem to find a website that carries lips, spoilers, side skirts, etc. Can anyone refer me to an American website (or any legitimate website that delivers to the U.S) that carries lips, etc. etc.?
https://www.fitfreak.net/forums/3rd-...ema-build.html

Powertrain Modifications:
- Spoon Sports Air Cleaner
- Spoon Sports Intake Manifold
- Spoon Sports Low Temp Thermostat
- Spoon Sports Magnetic Drain Bolts
- Spoon Sports Oil Filler Cap
- Spoon Sports Radiator Cap
- Spoon Sports Reservoir Covers
- Spoon Sports Spark Plugs
- Spoon Sports Super Taikyu Titanium Exhaust
- Spoon Sports Venturi Throttle Body
- Spoon Sports Yellow Valve Cover
- Kinetic Custom Machine Lithium Battery Tray

Chassis/Suspension Modifications:
- Spoon Sports Brake Lines
- Spoon Sports Brake Pads
- Spoon Sports Prototype Full Monoblock Calipers
- Spoon Sports Prototype Full Spec Dampers
- Spoon Sports Subframe Rigid Collars
- Spoon Sports USA One-Off Front Rotors
- JDM Honda Genuine Rear Disc Brake Conversion
- JDM Honda Genuine Rear Subframe

Exterior Modifications:
- Spoon Sports Aero Mirrors
- Spoon Sports Wheel Nuts
- Spoon Sports Windshield Wipers
- Spoon Sports USA One-Off Carbon Kevlar Sunroof Delete
- JDM Honda Genuine Fit RS Front Bumper
- JDM Honda Genuine Fit RS Side Skirts
- JDM Honda Genuine Fit RS Rear Bumper
- JDM Honda Genuine Fit RS Roof Spoiler
- JDM Honda Genuine Fit RS Front Grill
- JDM Honda Genuine Fit RS Emblems
- JDM Honda Genuine LED Projector Headlights
- JDM Honda Genuine LED Front Marker Lights
- JDM Honda Genuine Tail Lights
- ASM Dry Carbon License Plate
- ASM Short Antenna
- ASM Titanium License Plate Bolts
- Rays Volk Racing CE28 Club Racer Wheels F:15x7+10 R:15x7+28
- Yokohama ADVAN 190/580-15 Slick Tires
- PPG Paint by Signature Autobody

Interior Modifications:
- Spoon Sports Blue Wide Rear View Mirror
- Spoon Sports Carbon Bucket Seats
- Spoon Sports Shift Knob
- Spoon Sports Steering Boss
- Spoon Sports Steering Wheel
- Spoon Sports Super Taikyu Roll Cage
- Spoon Sports USA One-Off Carbon Door Panels
- Takata Racing Seat Belt Harnesses
 
  #3  
Old 12-02-2016, 12:06 PM
Gilly11277's Avatar
New Member
Join Date: Nov 2016
Location: Dekalb, IL
Posts: 13
I looked through that whole thread and there appears to be a lack of parts available. Even the Go Tuning website was lacking. I'd be really interested in some JDM/AUSDM headlights, taillights, and possibly bumpers.
 
  #4  
Old 12-02-2016, 01:16 PM
stembridge's Avatar
Member
5 Year Member
Join Date: Sep 2014
Location: The Middle West
Posts: 927
They're out there, but you have to hunt. I have a JDM rear bumper and rear taillights on my USDM Fit (which is rebadged as a Jazz).



If my info is right, this is identical to the Australian market Jazz, which has the longer USDM front bumper and shorter JDM rear bumper.

es
 
  #5  
Old 12-02-2016, 01:32 PM
Gilly11277's Avatar
New Member
Join Date: Nov 2016
Location: Dekalb, IL
Posts: 13
Nice!

Where did you get your rear bumper and tail lights? Also, have the taillights held up? I'm worried that if one of the LED's goes out I will have to replace the whole thing where as the USDM lights can be sourced locally.

Thanks!!
 
  #6  
Old 12-02-2016, 01:52 PM
stembridge's Avatar
Member
5 Year Member
Join Date: Sep 2014
Location: The Middle West
Posts: 927
Tails were from a guy on ebay (it's been well over a year ago, so you'll have to search on your own there), and they've held up fine. My mod thread (link in sig below) has lots of pics of the install. And yep, if the LED light goes out, you're replacing the whole module as opposed to a bulb. Note that I also did the upper taillights, which are illuminated on the JDM lights.



Rear bumper was from Boom Plus Toys. They took a *very* long time to ship, I was getting really nervous at the end. Note that you'll have to have it painted, so there's that added cost to contend with.

es
 
  #7  
Old 12-02-2016, 02:13 PM
Gilly11277's Avatar
New Member
Join Date: Nov 2016
Location: Dekalb, IL
Posts: 13
Wow, I really dig that!

Can you submit a picture of your Fit taillights with the brake lights on as well? I'm wondering where they light up for braking or does the LED strip just get brighter?

Thanks
 
  #8  
Old 12-02-2016, 03:53 PM
stembridge's Avatar
Member
5 Year Member
Join Date: Sep 2014
Location: The Middle West
Posts: 927
I'm away from my car right now, but this pic clearly shows the brake lights (hex pattern) are separate from the running lights:



Here's another pic from the interwebs (of a JDM Hybrid Fit) that shows the running lights and turn signal lit up (brake light is off in the pic):



HTH,

es
 
  #9  
Old 12-02-2016, 04:37 PM
Gilly11277's Avatar
New Member
Join Date: Nov 2016
Location: Dekalb, IL
Posts: 13
That is exactly what I needed. Thanks!
 
  #10  
Old 12-02-2016, 04:47 PM
skatana's Avatar
Member
5 Year Member
Join Date: May 2015
Location: CA US
Posts: 98
This site should have some parts. They're kinda pricey, though.
2015 + Honda Fit / JAZZ (GK3 / GK5) - CF-Spec Carbon
 
  #11  
Old 12-02-2016, 04:49 PM
Gilly11277's Avatar
New Member
Join Date: Nov 2016
Location: Dekalb, IL
Posts: 13
Originally Posted by skatana
This site should have some parts. They're kinda pricey, though.
2015 + Honda Fit / JAZZ (GK3 / GK5) - CF-Spec Carbon
Have you ordered from here before?

Thanks
 
  #12  
Old 12-02-2016, 11:45 PM
Join Date: Nov 2014
Location: South Carolina
Posts: 237
Use caution ordering from CF-Spec. I wrote them a couple times asking if the parts were specifically made to the USDM Fit. They sorta danced all around the answer. Never got a definite from them.
 
  #13  
Old 12-03-2016, 12:16 AM
Gilly11277's Avatar
New Member
Join Date: Nov 2016
Location: Dekalb, IL
Posts: 13
Originally Posted by robertsmithfromthecure
Use caution ordering from CF-Spec. I wrote them a couple times asking if the parts were specifically made to the USDM Fit. They sorta danced all around the answer. Never got a definite from them.

Good to know, thank you!
 
  #14  
Old 12-03-2016, 12:51 PM
stembridge's Avatar
Member
5 Year Member
Join Date: Sep 2014
Location: The Middle West
Posts: 927
You should also be aware that you'll have to remove the rear bumper beam from your USDM Fit if you install the JDM rear bumper shell - there's insufficient room for it to fit. I was unable to find out if the Australian market Jazz has a thinner beam back there, or none at all.

es
 
  #15  
Old 12-03-2016, 07:28 PM
BMW ALPINA's Avatar
Member
5 Year Member
iTrader: (1)
Join Date: Jan 2013
Location: California
Posts: 2,433
Originally Posted by stembridge
You should also be aware that you'll have to remove the rear bumper beam from your USDM Fit if you install the JDM rear bumper shell - there's insufficient room for it to fit. I was unable to find out if the Australian market Jazz has a thinner beam back there, or none at all.

es
If the JDM/AUD GK fit follow the JDM GE Fit design,
then there is NO Reinforcement Bar at all available on the JDM GK Fit.
(I am not sure about this on GK because I don't own GK)...
Yes, JDM GE Fit only have FRONT reinforcement bar from factory but none at the rear, I guess it is not required there...

here is what I did for my GE:
I change my USDM GE Fit to JDM bumper and what I did was I cut the 2 piece of "feet" that attached the ReBar to the car chassis/body to make it shorter (of course welding is involved)... so I can still have the USDM Reinforcement bar behind my JDM bumper.
it is really tight fit, the JDM bumper literally touch the reinforcement bar.
I don't know whether you can do what I did above with GK
because the GK JDM bumper might have no space at all to fit a modified USDM reinforcement bar...
 
  #16  
Old 12-04-2016, 12:07 AM
skatana's Avatar
Member
5 Year Member
Join Date: May 2015
Location: CA US
Posts: 98
Originally Posted by robertsmithfromthecure
Use caution ordering from CF-Spec. I wrote them a couple times asking if the parts were specifically made to the USDM Fit. They sorta danced all around the answer. Never got a definite from them.
Dedinitely good to know. I've been thinking about ordering a spoiler, but I haven't gotten around to it yet.
 
  #17  
Old 05-23-2020, 01:03 AM
Spoon_Sports's Avatar
New Member
Join Date: May 2020
Location: New York
Posts: 2
Wtb

Looking to buy a Spoon Sports automatic aluminum shift knob, preferably with box. Message me if you have one. Paypal ready!
 
  #18  
Old 05-24-2020, 02:43 PM
NWCH's Avatar
Member
iTrader: (2)
Join Date: Sep 2019
Location: Mountlake Terrace, WA
Posts: 1,112
Originally Posted by Spoon_Sports
Looking to buy a Spoon Sports automatic aluminum shift knob, preferably with box. Message me if you have one. Paypal ready!
No such thing. They only make manual shift knobs.
 
  #19  
Old 05-24-2020, 02:55 PM
Spoon_Sports's Avatar
New Member
Join Date: May 2020
Location: New York
Posts: 2
Originally Posted by NWCH
No such thing. They only make manual shift knobs.
Incorrect, Spoon did make an auto shift knob that looked identical to a manual knob, but with a push button.
 
  #20  
Old 09-11-2022, 02:29 PM
True.FitGK5's Avatar
New Member
Join Date: Jun 2021
Location: New Jersey
Posts: 2
Looking For Any AfterMarket Parts that will fit US MODEL 2020GK5!!

ANY HELP OR LINKS ARE MUCH APPRECIATED I HAVE NOT BEEN ABLE TO FIND ANYTHING FOR MY CAR PICTURED BELOW ⬇️ IM INTERESTED IN ANY LINKS AVAILABLE….. COSMETICS & PERFORMANCE LINKS WELCOMED PLEASE HELP!!!!

Photo Of My Car For Reference 2020 GK5 USA MODEL


 


Quick Reply: Aftermarket parts for GK5!!



All times are GMT -4. The time now is 10:26 PM.