GI: Direct Bolt-On Projectors!!
Joined: Oct 2006
Posts: 1,920
From: British Columbia
These ones that I've got comes with absolutely EVERYTHING you need to complete the job.
- 2 Bi-Xenon projectors, clear glass lens, ellipsoidal reflector bowls (TSX)
- 2 6000K xenon HID bulbs for pure bright white output (12 months warranty)
- 2 DIGITAL GEN3 Smart HID ballasts (12 months warranty)
- 2 integrated white CCFL angel eyes, SUPER BRIGHT (white color)
- 2 Fully integrated universal wiring harness
- 2 Mounting/alignment projector bases - Instructions
- Sealant, splice wire taps, waterproof connection seals
- 2 Bi-Xenon projectors, clear glass lens, ellipsoidal reflector bowls (TSX)
- 2 6000K xenon HID bulbs for pure bright white output (12 months warranty)
- 2 DIGITAL GEN3 Smart HID ballasts (12 months warranty)
- 2 integrated white CCFL angel eyes, SUPER BRIGHT (white color)
- 2 Fully integrated universal wiring harness
- 2 Mounting/alignment projector bases - Instructions
- Sealant, splice wire taps, waterproof connection seals
Last edited by Sid 6.7; Jan 8, 2009 at 02:09 PM. Reason: edited
Joined: Oct 2006
Posts: 1,920
From: British Columbia
yes you can, they are available 9 different bulb sizes H1,H3,H4,H7,9004,9005,9006,9007,H13 CE and UL safety listed, ISO registered manufacturing, E4, E11 TUV mark. All genuine parts are individually serial numbered
Joined: Oct 2006
Posts: 1,920
From: British Columbia
Last edited by Fit of RAGE; Jan 10, 2009 at 02:04 AM.
Joined: Oct 2006
Posts: 1,920
From: British Columbia
here's the DIY if you want it:
Alright everyone, it's done!!
Here's the DIY for the Bolt-On Projector Lens that i'm selling. After I installed it, I can truly say, that it's REALLY easy!! I did the entire job in 2 hours...including dissembling the headlight!!
Firstly, follow this thread on dissembling the headlight:
https://www.fitfreak.net/forums/fit-...rojectors.html
1) here's the headlight without the lens
2) you have to remove the bulb holder spring and the reflector...thingy???
You have to remove it from the back end.
3) Here's the headlight now:
4) remove all the spin locks, springs and washers from the projector unit. REMEMBER WHERE THEY GO!!!
5) Find out which side is the top side of the projector.
6) Feed all the wires through the FRONT of the headlight so that the Projector unit faces forward.
7) Put the locking tab back in place. IT ONLY GOES ONE WAY!
8) Now, put back all the spin locks, springs, washers everything IN THE RIGHT ORDER!
9) Guess what..... YOU'RE DONE!!
EASY!!!
Here's a pic of the Halo on:
Low Beam Cut-Off
High-Beam
(GB info is here: https://www.fitfreak.net/forums/gaug...jectors-3.html)
Here's the DIY for the Bolt-On Projector Lens that i'm selling. After I installed it, I can truly say, that it's REALLY easy!! I did the entire job in 2 hours...including dissembling the headlight!!
Firstly, follow this thread on dissembling the headlight:
https://www.fitfreak.net/forums/fit-...rojectors.html
1) here's the headlight without the lens
2) you have to remove the bulb holder spring and the reflector...thingy???
You have to remove it from the back end.
3) Here's the headlight now:
4) remove all the spin locks, springs and washers from the projector unit. REMEMBER WHERE THEY GO!!!
5) Find out which side is the top side of the projector.
6) Feed all the wires through the FRONT of the headlight so that the Projector unit faces forward.
7) Put the locking tab back in place. IT ONLY GOES ONE WAY!
8) Now, put back all the spin locks, springs, washers everything IN THE RIGHT ORDER!
9) Guess what..... YOU'RE DONE!!
EASY!!!
Here's a pic of the Halo on:
Low Beam Cut-Off
High-Beam
(GB info is here: https://www.fitfreak.net/forums/gaug...jectors-3.html)
Joined: Oct 2006
Posts: 1,920
From: British Columbia
The only pic that i've got is this one.
I didn't hook them up on mine because i've got the R8 lights. I felt that the Halo's and the R8's would clash.
Yes you can change them. They do come out. They use D2S bulbs
I didn't hook them up on mine because i've got the R8 lights. I felt that the Halo's and the R8's would clash.
Yes you can change them. They do come out. They use D2S bulbs
Joined: Oct 2006
Posts: 1,920
From: British Columbia
The back dust boot goes over all the connectors fine. I"ll grab pics later. Plus, the entire unit has it's own dust boots/seals anyway.
Joined: Oct 2006
Posts: 1,920
From: British Columbia
Subscribed. You've mentioned several times that people can use their existing ballasts. Does the kit come with EVERYTHING needed, including ballasts? It looks like it does, so I'm a little confused as to why you tell folks they can use existing stuff...
Joined: Oct 2006
Posts: 1,920
From: British Columbia
Ppl were wondering if they can use their current HID kits. You can use everything except the bulbs. Wiring and ballasts are compatible with the projector kits. You can't UAE the bulbs because the projectors use a D2S bulb.