Installation of the kit is relatively simple.
u start with removing the battery;remove both + - battery terminals,
loosen 10mm bolts on the battery strap down bracket & remove battery.
You may notice that your plastic battery cover (tray) has some water in it,this is true for the two 09 M/T cars we did, but not the dealer demo car.this is a rare honda miscue.with that said, it's a good idea to drill two holes on the bottom of the tray for water evacuation.
unclip & remove air sensor harness.
loosen the clamp at the throttle body & remove small hose clamp from pcv ( breather ) tube.
remove 10mm air filter box bracket bolt.
remove air box.you need to muscle it to the right & wiggle it out.
popping the intake on is a piece of cake
install instructions will come with the kit, no need for a mechanic here!!!
20 min. job!!
Again, this goes out to the guy's that have already paid & waiting quite some time know.
thanks for your patience & understanding.
Gerry