Thread: Help! Can't remove 1st gen Fog Lights!
View Single Post
  #1 (permalink)  
Old 07-05-2009, 08:32 PM
secondspassed's Avatar
secondspassed secondspassed is offline
Member
iTrader: (0)
  
Join Date: Apr 2008
Location: CA
Posts: 980
Rep Power: 42949674
secondspassed relies on Rep Points to livesecondspassed relies on Rep Points to livesecondspassed relies on Rep Points to livesecondspassed relies on Rep Points to livesecondspassed relies on Rep Points to livesecondspassed relies on Rep Points to livesecondspassed relies on Rep Points to livesecondspassed relies on Rep Points to livesecondspassed relies on Rep Points to livesecondspassed relies on Rep Points to livesecondspassed relies on Rep Points to live
Help! Can't remove 1st gen Fog Lights!
I've seen all the threads about installing protective film on your 1st gen fog lights but have not seen any good instructions on how to remove the fog light from the car.

I've pulled off the screws holding the housing into the bumper and the housing barely starts to come out before it runs out of slack on the wires. I can barely fit my ****ing hand in the hole that is made and can't figure out for the life of me how to unplug the fogs in order to bring the housings inside and apply protective film to the lenses.

What I can't figure out is where to apply pressure, or to use a screw driver, etc. to the actual plug. Anybody have any help to give?
Reply With Quote
Sponsored Links
Registered users do not see this ad.
Click here to register for free!