AJ-Racing specialize in Japanese high performance automotive parts for both street and circuit use. Our extensive knowledge and experience with Japanese tuning products allows us to bring you the best Japan has to offer.
Welcome to Fit Freak!
Welcome to Fit Freak,
You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, so please join our community today!
AJR Type-M spoiler -made out FRP -high quality -good fitment -requires holes drilling to fit
AJR Type-V spoiler -made out of FRP -high quality -requires holes drilling for LX and DX model
All spoilers are in stock and it's ready to ship. PM me or post any questions that you have here
Thanks
Ben
__________________
--------------------------------------------- A&J Racing International #155-1991 Savage Rd Richmond B.C. V6V 0A4 TEL: (604)279-0329 Email: info@aj-racing.com URL: www.aj-racing.com Your JDM parts and Honda Tuning Specialist
----------------------------------------------
Sponsored Links
Registered users do not see this ad. Click here to register for free!
__________________
--------------------------------------------- A&J Racing International #155-1991 Savage Rd Richmond B.C. V6V 0A4 TEL: (604)279-0329 Email: info@aj-racing.com URL: www.aj-racing.com Your JDM parts and Honda Tuning Specialist
----------------------------------------------
Quote:
Originally Posted by hazzard does the type-v use the sport factory holes?
Thats what im wondering...
I never install one myself so I am not sure.
Justin,
Can you please tell us if you need to redrill the holes ?
Thanks
Ben
__________________
--------------------------------------------- A&J Racing International #155-1991 Savage Rd Richmond B.C. V6V 0A4 TEL: (604)279-0329 Email: info@aj-racing.com URL: www.aj-racing.com Your JDM parts and Honda Tuning Specialist
----------------------------------------------
Can you please tell us if you need to redrill the holes ?
Thanks
Ben
Mine fit just inside the two outer holes. However, you'll have three somewhat exposed holes in the middle. To fix that, I just got some foam weatherstripping from Home Depot and applied the sticky side on the spoiler. It's a very tight fit, probably off by about a mm or so, but it does slot into the two outer holes. If it is too tight, you just need to enlarge the holes by a touch.
Quote:
Originally Posted by Combo
are these branded spoilers? which is better carbon fiber or FRP?
Pretty sure these are replica spoilers of the Mugen one and VTi-S one. As for which is better, that depends on what you want...