Parts Fitment Report 09+ Fit (GE8)

[Josurf808]

sooooo dis you guys see if the j's racing grill fits? or any of the parts that you said you'll be testing soon????

[AJR Jay]

^
We hope to be testing this in the future. We'll be keeping you guys posted!

Regards,

Jason @ AJR

[projekz]

Do you have the Spoon progressive springs in stock?

[AJR Jay]

Originally Posted by projekz

Do you have the Spoon progressive springs in stock?

From my understanding, Spoon does not have progressive springs for the GE available yet.

Regards,

Jason @ AJR

[projekz]

Originally Posted by AJ PwR Jr.

There are only limited products form you and they are not too interesting

Spoon Wing - OK !
Spoon N1 Muffler - OK !
Spoon Progressive springs - OK !

Spoon Carbon Hood - NOT YET !
Spoon Thermostat & switches - NO !
Spoon Lip - NO !

Most of the engine accessories will work

Does that mean the GD3 springs fit the GE8 or that the GE8 springs are out for purchase?

[AJR Jay]

^
This means the Spoon GE8 progressive springs will fit the USDM spec Fit. Hasn't been released yet though.

Regards,

Jason @ AJR

[JDMxGE8]

Is Spoon going to release the Street type muffler?

[AJR Jay]

^
As of now, nothing has been confirmed.

Regards,

Jason @ AJR

[AJ PwR Jr.]

Another update guys !

These parts will NOT fit without doing a JDM front end conversion !
Spoon Lip
Spoon hood
J's Racing lip
J's Racing Grill
J's Racing canards

That's pretty ***

[Josurf808]

^^^^that sucks biiiggg time!!

[Kittengolf]

AJ PwR Jr. I have a bunch of questions regarding parts fitment and compatability for my 2009 honda fit sport. I am planning on buying a bunch of stuff and want to make sure I get everything I need at once if possible. So here goes.

Will the T1R lower control arm brace fit the 2009 fit sport? Do you have any more J's racing lower arm braces if it wont, because I cant find them on the site.

I know you stated the J's racing C-pillar bar will fit the ge8. Does the same apply for the T1R C-pillar bar? Also wondering if the fender braces from J's racing will fit the GE.

I know this is a lot of questions but bear with me. Does the GE8 need the D or F type radiator cap from Spoon? Also cant seem to find a link to the spoon oil and radiator caps on the main site, only in the catalog. How do I order them? Also does the Spoon Drop in filter fit the GE? If not does anyone know when and if they will be releasing a drop in and a engine torque damper?

Finally, I am wanting to order T1R tow hooks. I notice most of the pictures of cars with these hooks have bumper plugs that look like they were made to fit them. Are these a part I can order or are they DIY's?

Sorry for all the questions. Just want to vclarify and figure I would post it so in case anyone shared some of these questions they wouldnt have to be answered more than once through a PM.

[Kittengolf]

Bump. I guess I will try to call them tomorrow, since neither this post nor the email I sent to the site seemed to warrant a response.

[JDMxGE8]

Any coilovers out yet?

[AJ PwR Jr.]

Originally Posted by Kittengolf

AJ PwR Jr. I have a bunch of questions regarding parts fitment and compatability for my 2009 honda fit sport. I am planning on buying a bunch of stuff and want to make sure I get everything I need at once if possible. So here goes.

Will the T1R lower control arm brace fit the 2009 fit sport? Do you have any more J's racing lower arm braces if it wont, because I cant find them on the site.

I know you stated the J's racing C-pillar bar will fit the ge8. Does the same apply for the T1R C-pillar bar? Also wondering if the fender braces from J's racing will fit the GE.

I know this is a lot of questions but bear with me. Does the GE8 need the D or F type radiator cap from Spoon? Also cant seem to find a link to the spoon oil and radiator caps on the main site, only in the catalog. How do I order them? Also does the Spoon Drop in filter fit the GE? If not does anyone know when and if they will be releasing a drop in and a engine torque damper?

Finally, I am wanting to order T1R tow hooks. I notice most of the pictures of cars with these hooks have bumper plugs that look like they were made to fit them. Are these a part I can order or are they DIY's?

Sorry for all the questions. Just want to vclarify and figure I would post it so in case anyone shared some of these questions they wouldnt have to be answered more than once through a PM.

No problem at all.

The T1R lower arm brace for the GE8 are not the same as the GD3 so they are not competable. The T1R LAB for the GE8 will be released later on this year.

J's Racing fender braces , C-pillar bar and T1R Carbon bar will fit on the GE8.

The radiator cap increases cooling efficiency and that's something good to have. The D-Type is the one that will fit onto the GE8. As for Spoon air filter, Spoon didnt release them yet but they all JDM replacement air filters will fit to the GE.

T1R tow hooks, I will fit them on the GE next week and will have a confirmation for everyone here posted.

[Kittengolf]

You are my hero sir.

[it's pronounced iVTEC]

bump for updates

[JDMxGE8]

May we please have an updated list of all the parts that are available for the GE8? Thanks.

[09blackfit]

When are the T1R S-spec Dampers going to be available for the GE8? I've got the springs but very interested in upgrading the shocks to go with them. Thanks

[BakedCookies]

Originally Posted by 09blackfit

When are the T1R S-spec Dampers going to be available for the GE8? I've got the springs but very interested in upgrading the shocks to go with them. Thanks

interested in this as well.

[AJR Jay]

Originally Posted by 09blackfit

When are the T1R S-spec Dampers going to be available for the GE8? I've got the springs but very interested in upgrading the shocks to go with them. Thanks

Hey there,

The S-Spec dampers won't be available until next year. They are in testing phases right now.

Regards,

Jason @ AJR