AJ-Racing specialize in Japanese high performance automotive parts for both street and circuit use. Our extensive knowledge and experience with Japanese tuning products allows us to bring you the best Japan has to offer.
Welcome to Fit Freak!
Welcome to Fit Freak,
You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, so please join our community today!
1. Do you have a picture of the Alex Under Tray, I'm going to be doing a front end conversion anyways, but i can't find a picture?
2. Will the J's Racing header on your site fit on the usdm Honda Fit's?
3. Why doesn't the J's racing or ATS final gear fit on the usdm Honda Fit, i'm asking because i was hoping to get a jdm 4.111:1 final gear, but if the jdm aftermarket final gears don't fit then i doubt a jdm stock final would?
Also i noticed that on Carbonetic's website they list a final gear for the Honda Fit which would be the same as ATS's final wouldn't it since Carbonetic is basically a distributor for ATS?
I'll try and get a hold of AJ today and see if they have a pic of the Alex Under Tray. I remember Ben having that on his Fit last year.
The J's Racing Header will fit the USDM Honda Fits.
Not sure why the final gear wouldn't fit, I'll have to try and get a hold of Ben for this one. T1R just released a final gear for the USDM Fit, maybe that's an alternative you can look into
Not sure why the final gear wouldn't fit, I'll have to try and get a hold of Ben for this one. T1R just released a final gear for the USDM Fit, maybe that's an alternative you can look into
Actually the reason i was wondering is because i want to get a jdm honda 4.111:1 final drive and 3.142:1 first gear that came on jdm honda fit's, but if the aftermarket jdm final drives don't fit then i doubt the jdm honda final would either.
so, i know im posting kind of late but does the j's racing engine torque damper fit or no?? did they come out with one that fits the us fit?
They will not work.
For now, only Spoon makes one for the USDM.
Quote:
DENSO has some plugs that work for the fit...
IK20-24, and the Spoon plugs are IK24's from the last time I checked.
I think IK20 is ok but IK24 is too cold for the L15A.
__________________
--------------------------------------------- A&J Racing International #155-1991 Savage Rd Richmond B.C. V6V 0A4 TEL: (604)279-0329 Email: info@aj-racing.com URL: www.aj-racing.com Your JDM parts and Honda Tuning Specialist
----------------------------------------------
What reason is it for the Mugen 5-way coilovers to not fit on the USDM models? Is it the mounting points or something?
BTW, thanks for all the great info. Sorry to revive an old thread.
What reason is it for the Mugen 5-way coilovers to not fit on the USDM models? Is it the mounting points or something?
BTW, thanks for all the great info. Sorry to revive an old thread.
the holes on the front struts need to be widened where the pinch bolts go. i have the non-adjustable ones and same deal. King motorsports does it before they ship em. bolted up no problems.
That I am not sure. I have customers who bought Mugen suspension and most of them have to modify it before you can install.
__________________
--------------------------------------------- A&J Racing International #155-1991 Savage Rd Richmond B.C. V6V 0A4 TEL: (604)279-0329 Email: info@aj-racing.com URL: www.aj-racing.com Your JDM parts and Honda Tuning Specialist
----------------------------------------------
So I don't need to modify my car's front struts if I buy the ones from King Motorsports? Just clarifying.
the mugen suspension comes with front struts, rear shocks and springs. King drills out the front struts for you. you just have to bolt them up. Call Scott at King and he will confirm.
For the rear bumper to fit what needs to be done? I'd really like to get the rear bumper if it isn't gonna cost me an arm & leg to do it. I've heard that all i gotta do is remove the rebar is that true?
Are the JDM sides the same height as the USDM sides? I've got a base model and i wanna install the JDM sides and possibly a Mugen Style Front Lip but i'd like everything to more or less line up.. any input on that?
For the rear bumper to fit what needs to be done? I'd really like to get the rear bumper if it isn't gonna cost me an arm & leg to do it. I've heard that all i gotta do is remove the rebar is that true?
Are the JDM sides the same height as the USDM sides? I've got a base model and i wanna install the JDM sides and possibly a Mugen Style Front Lip but i'd like everything to more or less line up.. any input on that?
Thanks
For the rear bumper, all you have to do is to replace the rebar then the JDM rear bumper will go on with no issues.
JDM Honda side skirts sits a but lower than the USDM Sport's side. The Mugen lip will be lower than the sides so if you can accept that, that go for it.
__________________
--------------------------------------------- A&J Racing International #155-1991 Savage Rd Richmond B.C. V6V 0A4 TEL: (604)279-0329 Email: info@aj-racing.com URL: www.aj-racing.com Your JDM parts and Honda Tuning Specialist
----------------------------------------------
For the parts that fit so far : -J's Racing strut bar (front) 6 holes on the car only 4 line up (it will work)
-J's Racing rear strut bar
-J's Racing c-pillar bar
-J's Lower tie bar
-T1R Coil springs
Spoon b-pipe and N1 Muffler (little bit short because USDM bumper is longer by 1.5-2")
-T1R 50R & 50S exhaust system
-JDM tail lights (wiring must be extended and some plugs has to be modified)
-JDM rear bumper (with replacing re-bar to monocoque bar)
-Spoon carbon spoiler **when the hatch all the way up, it will hit the Antenna** **rear wipers will hit the spoiler when you turn them on**
-Titanium Antenna
-JDM and Mugen door visors
-Mugen shiftboot and e-brake cover
-JDM mirrors
-JDM Tail lights
-Mugen door sills
-JDM front rebar
-Spoon thermoswitch
-Spoon drain plugs
-J's/Spoon oil cap and rad cap
-J's/Spoon brakelines
-J's monocoque bar
-J's 50RR/RS exhaust
-T1R header
-T1R b-pipe
-Mugen MT and AT pedals
-Spoon AT shiftknob
-Spoon drain plugs
-J's Racing radiator cap
-JDM 1.5S side skirts
-after market HIDs
-ALEX / J's Racing tow hooks
-JDM Door sills
-Momo steering wheel
-Splash hub adaptor
-Workbell quick release hub
-Bride Gias seat
-ALEX seat sliders (passenger seat custom bracket for SRS sensor)
-Spoon air filter
-Spoon calipers and rotors
-H.A.M.P. Oil filter
-NGK IRIWAY series spark plugs -Billion /SAMCO Radiator hose -JDM Armrest console -T1R Racing convertor (Test pipe) -JDM Roof console -ALEX engine mount -Mugen Shiftboot and AT knob cover -JDM sun visor -ZOOM Carbon rear view mirror
Parts that don't fit:
-all JDM brand front coil-over suspension will not fit without modifications
-JDM front bumper
-JDM HID headlamps
-ALL JDM hood
-JDM Fenders
-ALL JDM grills
-ALL JDM front or rear bumper or lip / apron (ONLY side skirts will fit)
-Mugen hatch filler (cannot fit without JDM bumper)
-J's/Spoon Engine Torque Damper
-J's/Spoon throttlebody
-Some JDM intakes (will hit against the battery becasue of the drive by wire system made the TB sit further out)
-Spoon blue wide mirrors
-J's Racing Cross bar
-J's Racing floor bar
-Spoon header
-All JDM header
-earlier model GD1/GD2 exhaust b-pipe will not fit -Cusco Lower tie bar -ALL LHD Radio panel (will fit with modifications) -Honda Veni Intake (will fit with modifications) -ALEX Aluminum undertray (will fit with mofications) -J's Racing and ATS Final gear Parts that I haven't test:
-TK Sports subframe bar (front & rear)
-J's Racing brakelines
-J's Racing 3D GT-wing -J's Racing LSD
UNknown - if it is going to work or not !
-Top fuel Turbo
-HKS Turbo kit
-LSD
-clutch
Linear Mode
