Fit FREAK.net

Go Back   Unofficial Honda FIT Forums > Vendor Marketplace Forums > AJ-Racing.com
Reload this Page AJR GE8 in Progress !
Register FAQ iTrader Members List Calendar Search Today's Posts Mark Forums Read Used Cars

AJ-Racing.com
AJ-Racing specialize in Japanese high performance automotive parts for both street and circuit use. Our extensive knowledge and experience with Japanese tuning products allows us to bring you the best Japan has to offer.

Welcome to Fit Freak!
Welcome to Fit Freak,

You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, so please join our community today!


Reply
Page 1 of 2 1 2 >
 
LinkBack Thread Tools Display Modes
  #1 (permalink)  
Old 07-01-2009, 12:02 AM
AJ PwR Jr.'s Avatar
Platinum Honda FIT Vendor
iTrader: (10)
  
Join Date: Nov 2005
Location: Japan
Posts: 1,881
Rep Power: 995232
AJ PwR Jr. relies on Rep Points to liveAJ PwR Jr. relies on Rep Points to liveAJ PwR Jr. relies on Rep Points to liveAJ PwR Jr. relies on Rep Points to liveAJ PwR Jr. relies on Rep Points to liveAJ PwR Jr. relies on Rep Points to liveAJ PwR Jr. relies on Rep Points to liveAJ PwR Jr. relies on Rep Points to liveAJ PwR Jr. relies on Rep Points to liveAJ PwR Jr. relies on Rep Points to liveAJ PwR Jr. relies on Rep Points to live
Send a message via AIM to AJ PwR Jr.
AJR GE8 in Progress !
Hi Guys,

I know I have been lagging in updating this forum here... very sorry From now on, I will be on it and I will keep this forum interesting and more new stuff will be releasing soon.

Now, I would like to update our AJR Fit.

Here's the Specs so far :

Engine :
T1R Voltage stabilizer
T1R Earth kit
T1R Crank pulley (Prototype)
T1R oil cap
T1R radiator cap
T1R reservoir tank covers
T1R 50S muffler
T1R 50S b-pipe

Exterior :
AJR Carbon vinyl'ed roof
AJR Carbon vinyl'ed side mirrors
JDM LED tail lamps
JDM Front end & Mugen kit **Coming soon !**


Interior :
T1R Type-GS seats
T1R T182R Titanium shiftknob
T1R shiftboot
Bride seat sliders
Nardi Steering wheel
Worksbell short hub
Worksbell quick release
ZOOM Carbon rear view mirror

Suspension / brakes / wheels:
T1R S-Coil springs
T1R BBK **coming soon**
T1R brakelines (prototype)
Spoon roll center adjuster
Rays CE28N 17*7.5 +43 with S-Drive 205/40/17
T1R wheel nuts

More coming stay tuned

Here's the pics :





















Enjoy
__________________
---------------------------------------------
A&J Racing International
#155-1991 Savage Rd
Richmond B.C. V6V 0A4
TEL: (604)279-0329
Email: info@aj-racing.com
URL: www.aj-racing.com
Your JDM parts and Honda Tuning Specialist
----------------------------------------------
Reply With Quote
Sponsored Links
Registered users do not see this ad.
Click here to register for free!
  #2 (permalink)  
Old 07-01-2009, 12:15 AM
dewthedew's Avatar
Fit Moderator
iTrader: (3)
  
Join Date: Apr 2008
Location: Davie, Fl
Posts: 2,864
Rep Power: 7469700
dewthedew relies on Rep Points to livedewthedew relies on Rep Points to livedewthedew relies on Rep Points to livedewthedew relies on Rep Points to livedewthedew relies on Rep Points to livedewthedew relies on Rep Points to livedewthedew relies on Rep Points to livedewthedew relies on Rep Points to livedewthedew relies on Rep Points to livedewthedew relies on Rep Points to livedewthedew relies on Rep Points to live
Send a message via AIM to dewthedew
those seats are baller as hell!! but those cf stickers..... idk.
Reply With Quote
  #3 (permalink)  
Old 07-01-2009, 01:20 AM
Im|Inside|Fit's Avatar
Member
iTrader: (1)
  
Join Date: Jul 2007
Location: fresno, ca,. us
Posts: 952
Rep Power: 19147
Im|Inside|Fit relies on Rep Points to liveIm|Inside|Fit relies on Rep Points to liveIm|Inside|Fit relies on Rep Points to liveIm|Inside|Fit relies on Rep Points to liveIm|Inside|Fit relies on Rep Points to liveIm|Inside|Fit relies on Rep Points to liveIm|Inside|Fit relies on Rep Points to liveIm|Inside|Fit relies on Rep Points to liveIm|Inside|Fit relies on Rep Points to liveIm|Inside|Fit relies on Rep Points to liveIm|Inside|Fit relies on Rep Points to live
Holy smokes! Moarrrrr! =)
__________________
"Passion is Priceless"


-Dennis Kong
Reply With Quote
  #4 (permalink)  
Old 07-01-2009, 01:41 AM
Supervillain
iTrader: (0)
  
Join Date: Sep 2006
Location: SoCal
Posts: 2,721
Rep Power: 1468024
doctordoom relies on Rep Points to livedoctordoom relies on Rep Points to livedoctordoom relies on Rep Points to livedoctordoom relies on Rep Points to livedoctordoom relies on Rep Points to livedoctordoom relies on Rep Points to livedoctordoom relies on Rep Points to livedoctordoom relies on Rep Points to livedoctordoom relies on Rep Points to livedoctordoom relies on Rep Points to livedoctordoom relies on Rep Points to live
Send a message via AIM to doctordoom
lots of cf dress-up parts. can't wait to see what it looks like down the road. are you guys gonna be building this for the track like your gd3, or do you have other plans in mind?
Reply With Quote
  #5 (permalink)  
Old 07-01-2009, 01:46 AM
Type 100's Avatar
Member
iTrader: (0)
  
Join Date: Jan 2009
Location: Parañaque City, Philippines
Posts: 776
Rep Power: 3129587
Type 100 relies on Rep Points to liveType 100 relies on Rep Points to liveType 100 relies on Rep Points to liveType 100 relies on Rep Points to liveType 100 relies on Rep Points to liveType 100 relies on Rep Points to liveType 100 relies on Rep Points to liveType 100 relies on Rep Points to liveType 100 relies on Rep Points to liveType 100 relies on Rep Points to liveType 100 relies on Rep Points to live
Send a message via MSN to Type 100 Send a message via Yahoo to Type 100
Wow polished lip? Aren't those wheels LE28s?
__________________
Meet my Aibo: 2005 GD1 Honda Jazz 1.3S
Fit4Trav got it right: REAL FRIENDS > CAR CLUBS
Reply With Quote
  #6 (permalink)  
Old 07-01-2009, 04:42 AM
spoonek4's Avatar
Member
iTrader: (0)
  
Join Date: Jun 2006
Location: Vancouver, BC
Posts: 1,040
Rep Power: 282063
spoonek4 relies on Rep Points to livespoonek4 relies on Rep Points to livespoonek4 relies on Rep Points to livespoonek4 relies on Rep Points to livespoonek4 relies on Rep Points to livespoonek4 relies on Rep Points to livespoonek4 relies on Rep Points to livespoonek4 relies on Rep Points to livespoonek4 relies on Rep Points to livespoonek4 relies on Rep Points to livespoonek4 relies on Rep Points to live
Oi big guy, let's go to the Proformance event in August. I wanna run with your GE8!
__________________


http://www.fitfreak.net/forums/fit-j...installed.html My all time favorite mods - Quaife LSD/Mfactory 4.7FD/T1R clutch installed
www.teammfactory.com Honda D/B/H/K/L series transmission specialist
www.proformanceracingschool.com
Reply With Quote
  #7 (permalink)  
Old 07-01-2009, 04:53 AM
it's pronounced iVTEC's Avatar
Member
iTrader: (0)
  
Join Date: Nov 2008
Location: Fort St John, British Columbia, Canada
Posts: 922
Rep Power: 645465
it's pronounced iVTEC relies on Rep Points to liveit's pronounced iVTEC relies on Rep Points to liveit's pronounced iVTEC relies on Rep Points to liveit's pronounced iVTEC relies on Rep Points to liveit's pronounced iVTEC relies on Rep Points to liveit's pronounced iVTEC relies on Rep Points to liveit's pronounced iVTEC relies on Rep Points to liveit's pronounced iVTEC relies on Rep Points to liveit's pronounced iVTEC relies on Rep Points to liveit's pronounced iVTEC relies on Rep Points to liveit's pronounced iVTEC relies on Rep Points to live
i like! i really like that carbon fiber vinyl. i think it would looks sweet on a black fit do you guys sell that stuff in sheets?
__________________
Fitless! Gone but not forgotten

Reply With Quote
  #8 (permalink)  
Old 07-02-2009, 12:06 AM
Member
iTrader: (1)
  
Join Date: Nov 2008
Location: Renton,WA
Posts: 396
Rep Power: 414365
ekonetics relies on Rep Points to liveekonetics relies on Rep Points to liveekonetics relies on Rep Points to liveekonetics relies on Rep Points to liveekonetics relies on Rep Points to liveekonetics relies on Rep Points to liveekonetics relies on Rep Points to liveekonetics relies on Rep Points to liveekonetics relies on Rep Points to liveekonetics relies on Rep Points to liveekonetics relies on Rep Points to live
Quote:
Originally Posted by spoonek4 View Post
Oi big guy, let's go to the Proformance event in August. I wanna run with your GE8!
I would love to see that GE8 on the track especially with your GD3.
Reply With Quote
  #9 (permalink)  
Old 07-02-2009, 12:46 AM
Member
iTrader: (1)
  
Join Date: Oct 2008
Location: Signal Mountain, TN
Posts: 296
Rep Power: 1287979
09blackfit relies on Rep Points to live09blackfit relies on Rep Points to live09blackfit relies on Rep Points to live09blackfit relies on Rep Points to live09blackfit relies on Rep Points to live09blackfit relies on Rep Points to live09blackfit relies on Rep Points to live09blackfit relies on Rep Points to live09blackfit relies on Rep Points to live09blackfit relies on Rep Points to live09blackfit relies on Rep Points to live
I too am interested in the carbon vinyl. Has the look at a fraction of the cost of real carbon. Where can I get this?
Reply With Quote
  #10 (permalink)  
Old 07-02-2009, 02:00 AM
Member
iTrader: (0)
  
Join Date: Mar 2009
Location: BC Canada
Posts: 262
Rep Power: 98701
blackvitzrs relies on Rep Points to liveblackvitzrs relies on Rep Points to liveblackvitzrs relies on Rep Points to liveblackvitzrs relies on Rep Points to liveblackvitzrs relies on Rep Points to liveblackvitzrs relies on Rep Points to liveblackvitzrs relies on Rep Points to liveblackvitzrs relies on Rep Points to liveblackvitzrs relies on Rep Points to liveblackvitzrs relies on Rep Points to liveblackvitzrs relies on Rep Points to live
how much do u guys charge for just labour installing a black vinyl roof. Do you guys offer that service?
Reply With Quote
  #11 (permalink)  
Old 07-02-2009, 03:57 AM
MR-GE8's Avatar
Member
iTrader: (1)
  
Join Date: Oct 2008
Location: Vancouver, BC, Canada
Posts: 109
Rep Power: 126158
MR-GE8 relies on Rep Points to liveMR-GE8 relies on Rep Points to liveMR-GE8 relies on Rep Points to liveMR-GE8 relies on Rep Points to liveMR-GE8 relies on Rep Points to liveMR-GE8 relies on Rep Points to liveMR-GE8 relies on Rep Points to liveMR-GE8 relies on Rep Points to liveMR-GE8 relies on Rep Points to liveMR-GE8 relies on Rep Points to liveMR-GE8 relies on Rep Points to live
Ajr does do the cf vinyl. It's on their site under their blog. I believe you can call in and ask them about pricing. Cars good looking good tho. Keep it up.
__________________

PROJECT: 2009 FIT [Milano Red]
Reply With Quote
  #12 (permalink)  
Old 07-02-2009, 04:35 PM
vinn's Avatar
Member
iTrader: (0)
  
Join Date: Aug 2008
Location: SoCaL
Posts: 863
Rep Power: 3455064
vinn relies on Rep Points to livevinn relies on Rep Points to livevinn relies on Rep Points to livevinn relies on Rep Points to livevinn relies on Rep Points to livevinn relies on Rep Points to livevinn relies on Rep Points to livevinn relies on Rep Points to livevinn relies on Rep Points to livevinn relies on Rep Points to livevinn relies on Rep Points to live
Send a message via AIM to vinn
makes my car look bad! hahah
__________________

Reply With Quote
  #13 (permalink)  
Old 07-02-2009, 09:36 PM
Member
iTrader: (1)
  
Join Date: Sep 2008
Location: Richmond, BC
Posts: 118
Rep Power: 8693
AJR Jay relies on Rep Points to liveAJR Jay relies on Rep Points to liveAJR Jay relies on Rep Points to liveAJR Jay relies on Rep Points to liveAJR Jay relies on Rep Points to liveAJR Jay relies on Rep Points to liveAJR Jay relies on Rep Points to liveAJR Jay relies on Rep Points to liveAJR Jay relies on Rep Points to liveAJR Jay relies on Rep Points to liveAJR Jay relies on Rep Points to live
Send a message via MSN to AJR Jay
Hey there,

The material is $100 CAD per metre squared, we also offer the service for customers to get the parts installed. Feel free to call in for any inquiries.

Regards,

Jason @ AJR
__________________
---------------------------------------------
A&J Racing International
#155 - 1991 Savage Rd.
Richmond B.C. V6V 0A4
TEL: (604)279-0329
Email: info@aj-racing.com
URL: www.aj-racing.com
Your JDM parts and Honda Tuning Specialist
----------------------------------------------
Reply With Quote
  #14 (permalink)  
Old 08-25-2009, 12:58 AM
MugenAP2's Avatar
Member
iTrader: (1)
  
Join Date: Nov 2008
Location: Miami
Posts: 106
Rep Power: 22908
MugenAP2 relies on Rep Points to liveMugenAP2 relies on Rep Points to liveMugenAP2 relies on Rep Points to liveMugenAP2 relies on Rep Points to liveMugenAP2 relies on Rep Points to liveMugenAP2 relies on Rep Points to liveMugenAP2 relies on Rep Points to liveMugenAP2 relies on Rep Points to liveMugenAP2 relies on Rep Points to liveMugenAP2 relies on Rep Points to liveMugenAP2 relies on Rep Points to live
Can you prefab the carbon vinyl for the top?
Reply With Quote
  #15 (permalink)  
Old 08-25-2009, 04:08 PM
Member
iTrader: (0)
  
Join Date: Jul 2009
Location: Vancouver
Posts: 35
Rep Power: 0
buttered corn is an unknown quantity at this point
do your seats have sliders? How much for seats/sliders(if applicable)/rails?
Reply With Quote
  #16 (permalink)  
Old 08-25-2009, 07:36 PM
AJ PwR Jr.'s Avatar
Platinum Honda FIT Vendor
iTrader: (10)
  
Join Date: Nov 2005
Location: Japan
Posts: 1,881
Rep Power: 995232
AJ PwR Jr. relies on Rep Points to liveAJ PwR Jr. relies on Rep Points to liveAJ PwR Jr. relies on Rep Points to liveAJ PwR Jr. relies on Rep Points to liveAJ PwR Jr. relies on Rep Points to liveAJ PwR Jr. relies on Rep Points to liveAJ PwR Jr. relies on Rep Points to liveAJ PwR Jr. relies on Rep Points to liveAJ PwR Jr. relies on Rep Points to liveAJ PwR Jr. relies on Rep Points to liveAJ PwR Jr. relies on Rep Points to live
Send a message via AIM to AJ PwR Jr.
Quote:
Originally Posted by 09blackfit View Post
I too am interested in the carbon vinyl. Has the look at a fraction of the cost of real carbon. Where can I get this?
Anyone who is interested in the Carbon Vinyl, we do sell them and they cost $120CAD approx. $105USD per 4ft*4ft

We are not able t precut it because you may need to heat up the material and stretch a bit in order to work on the roof.

Quote:
do your seats have sliders? How much for seats/sliders(if applicable)/rails?
Yes we are able t get you the seat slider bracket and they run about $215CAD approx. $179USD per side.

Quote:
Wow polished lip? Aren't those wheels LE28s?
Yes sir, these are old school wheels.

Quote:
lots of cf dress-up parts. can't wait to see what it looks like down the road. are you guys gonna be building this for the track like your gd3, or do you have other plans in mind?
This car will be semi-build for the track because this is my daily driver as well

Quote:
Oi big guy, let's go to the Proformance event in August. I wanna run with your GE8!
September for sure !!!!
__________________
---------------------------------------------
A&J Racing International
#155-1991 Savage Rd
Richmond B.C. V6V 0A4
TEL: (604)279-0329
Email: info@aj-racing.com
URL: www.aj-racing.com
Your JDM parts and Honda Tuning Specialist
----------------------------------------------
Reply With Quote
  #17 (permalink)  
Old 08-26-2009, 06:07 PM
Member
iTrader: (1)
  
Join Date: Nov 2008
Location: Renton,WA
Posts: 396
Rep Power: 414365
ekonetics relies on Rep Points to liveekonetics relies on Rep Points to liveekonetics relies on Rep Points to liveekonetics relies on Rep Points to liveekonetics relies on Rep Points to liveekonetics relies on Rep Points to liveekonetics relies on Rep Points to liveekonetics relies on Rep Points to liveekonetics relies on Rep Points to liveekonetics relies on Rep Points to liveekonetics relies on Rep Points to live
Let me know what day you plan on being at the track so I can come watch.

Eric
Reply With Quote
  #18 (permalink)  
Old 08-26-2009, 06:19 PM
Fitftw's Avatar
Member
iTrader: (0)
  
Join Date: Mar 2007
Location: Tacoma, Washington
Posts: 2,437
Rep Power: 22286419
Fitftw relies on Rep Points to liveFitftw relies on Rep Points to liveFitftw relies on Rep Points to liveFitftw relies on Rep Points to liveFitftw relies on Rep Points to liveFitftw relies on Rep Points to liveFitftw relies on Rep Points to liveFitftw relies on Rep Points to liveFitftw relies on Rep Points to liveFitftw relies on Rep Points to liveFitftw relies on Rep Points to live
Send a message via AIM to Fitftw Send a message via MSN to Fitftw
is this gonna be boosted down the rode as well?
__________________
Jae

2007 BOM Fit Auto...
Reply With Quote
  #19 (permalink)  
Old 08-28-2009, 02:44 AM
1FiTpINOY's Avatar
Member
iTrader: (4)
  
Join Date: May 2008
Location: Miramar, FL
Posts: 606
Rep Power: 1957560
1FiTpINOY relies on Rep Points to live1FiTpINOY relies on Rep Points to live1FiTpINOY relies on Rep Points to live1FiTpINOY relies on Rep Points to live1FiTpINOY relies on Rep Points to live1FiTpINOY relies on Rep Points to live1FiTpINOY relies on Rep Points to live1FiTpINOY relies on Rep Points to live1FiTpINOY relies on Rep Points to live1FiTpINOY relies on Rep Points to live1FiTpINOY relies on Rep Points to live
Send a message via AIM to 1FiTpINOY
danm that looks soooo good!!! is that offset flush with the fender or is there a little more to go?

Again it looks great!!!
__________________
Last edited by 1FiTpINOY; 08-28-2009 at 02:46 AM.
Reply With Quote
  #20 (permalink)  
Old 09-01-2009, 05:55 PM
AJ PwR Jr.'s Avatar
Platinum Honda FIT Vendor
iTrader: (10)
  
Join Date: Nov 2005
Location: Japan
Posts: 1,881
Rep Power: 995232
AJ PwR Jr. relies on Rep Points to liveAJ PwR Jr. relies on Rep Points to liveAJ PwR Jr. relies on Rep Points to liveAJ PwR Jr. relies on Rep Points to liveAJ PwR Jr. relies on Rep Points to liveAJ PwR Jr. relies on Rep Points to liveAJ PwR Jr. relies on Rep Points to liveAJ PwR Jr. relies on Rep Points to liveAJ PwR Jr. relies on Rep Points to liveAJ PwR Jr. relies on Rep Points to liveAJ PwR Jr. relies on Rep Points to live
Send a message via AIM to AJ PwR Jr.
Quote:
Originally Posted by ekonetics View Post
Let me know what day you plan on being at the track so I can come watch.

Eric
I am getting something done at the bodyshop now so will hit the track at Pacific once it is ready

Quote:
is this gonna be boosted down the rode as well?
Yes. We have most of the Turbo components made up already and we are trying to figure out what to do for fuel management. Once we got that figured out, I will post more details of the kit.
__________________
---------------------------------------------
A&J Racing International
#155-1991 Savage Rd
Richmond B.C. V6V 0A4
TEL: (604)279-0329
Email: info@aj-racing.com
URL: www.aj-racing.com
Your JDM parts and Honda Tuning Specialist
----------------------------------------------
Reply With Quote
Reply
Page 1 of 2 1 2 >

Tags
aj, ajr, carbon, cf, fiber, fit, ge8, honda, pipe, racing, suspension, vinyl

« T1R Chromoly Wheel Nut Set (M12x1.5) | T1R bars for GE8 09+ Fit ! (Carbon madness) »
Thread Tools
Display Modes
Linear Mode Linear Mode

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
FS: Progress Rear Sway Bar-07'/08' rocksnap For Sale / Want To Buy / Classified Ads for USED Fit Items 0 10-10-2008 11:19 AM
looking to get either Progress or T1R springs...help. osarias Fit Suspension & Brake Modifications 4 04-07-2008 09:32 PM
Progress rear sway with coilovers jsensk Fit Suspension & Brake Modifications 12 02-28-2008 03:22 PM
GREAT(!) deal on Progress Rear Anti-Sway Bar!!! Sleep_DEPRIVED Fit Suspension & Brake Modifications 2 09-27-2007 01:11 AM
Progress Tech Coilover abcduy Fit Suspension & Brake Modifications 5 07-10-2007 02:28 PM

 
Go


Contact Us - Unofficial Honda FIT and Honda Jazz Forum - Archive - Top
All times are GMT -4. The time now is 04:43 PM.

Powered by vBulletin® Version 3.7.3
Copyright ©2000 - 2009, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.2.0