T1R 50S muffler & B-pipe ! In Stock Now !!!!

AJ PwR Jr. · #1 (**permalink**) 09-01-2009, 05:17 PM

Hi Guys,

The new T1R 50S muffler and the T1R 50S b-pipe are finally here

T1R 50S muffler
- bolt on to stock or any after market B-pipes
- 50mm piping with 1.2mm thickness (Ultra lightweight)
- Deep throaty tone
- We dynoed +4whp & 4ft/lbs torque
- precision quality with gradient finished tip
- MSRP $395CAD approx. $345USD **In stock now**

T1R 50S B-pipe
- Direct replaces OEM b-pipe
- 50mm main pipe with 1.2mm thick tubing (lightweight design)
- increases exhaust efficiency to optimize maximum power thorough the entire rpm range
- Precision quality
- MSRP $425CAD approx. $370USD **in stock now**

Buy both will receive FREE SHIPPING within the continental U.S. & Canada only !!!!!!

Any questions, please PM me or email us at info@aj-racing.com

Thanks
Ben @ AJR

dianosaur · #2 (**permalink**) 09-02-2009, 12:59 AM

WOOOO
I'm excited!

Marsbars · #3 (**permalink**) 09-05-2009, 07:47 PM

Do you know if this would fit with the Mugen rear under spoiler?

kingofpicklez · #4 (**permalink**) 09-05-2009, 08:06 PM

Quote:

Originally Posted by Marsbars

Do you know if this would fit with the Mugen rear under spoiler?

probably not because the muffler angles down.

AJ PwR Jr. · #5 (**permalink**) 09-08-2009, 03:50 PM

Quote:

Originally Posted by Marsbars

Do you know if this would fit with the Mugen rear under spoiler?

I don't think it will fit unless you cut off the tip

kingofpicklez · #6 (**permalink**) 09-10-2009, 12:00 AM

hey, i just got mine and installed it today, one thing i wanna kinda complain about is the lack of nuts for the bolts because the nuts on the stock one was welded on -_-, so i ended up going to OSH, because home depot don't carry metric nuts. I'll try to get some pictures and video over the weekend.

JCrimson · #7 (**permalink**) 09-10-2009, 10:20 AM

too bad there isnt an n1 clean style like this from t1r for the GD3, or would this fit????

AJ PwR Jr. · #8 (**permalink**) 09-10-2009, 03:34 PM

Quote:

Originally Posted by kingofpicklez

hey, i just got mine and installed it today, one thing i wanna kinda complain about is the lack of nuts for the bolts because the nuts on the stock one was welded on -_-, so i ended up going to OSH, because home depot don't carry metric nuts. I'll try to get some pictures and video over the weekend.

We have included 2x 12mm flange nut and 2 x washers with every muffler that we shipped. We made sure it's there because we don't want customer like you to hunt around for these. Please check again and they should be in the box.

If you have any questions, please PM me directly.

Quote:

too bad there isnt an n1 clean style like this from t1r for the GD3, or would this fit????

This will not work on the GD3. We have plans launching the 50S Version 3.0 which looks similar to the GE8 ones.

JCrimson · #9 (**permalink**) 09-10-2009, 05:57 PM

okay one more question, can you please clearify this.

T1R 63 Sports Exhaust System - 07+ Fit GD3 - JHPUSA

look at that. this is the part number 18000-GD3-50S
is that one n1 style? is it a full cat back? please show me more pics of this product. sorry to be off topic. im just ready to buy

AJ PwR Jr. · #10 (**permalink**) 09-14-2009, 03:15 PM

Quote:

Originally Posted by JCrimson

okay one more question, can you please clearify this.

T1R 63 Sports Exhaust System - 07+ Fit GD3 - JHPUSA

look at that. this is the part number 18000-GD3-50S
is that one n1 style? is it a full cat back? please show me more pics of this product. sorry to be off topic. im just ready to buy

I think that's a typo. T1R only offers 50S for the Fit GD3 and GE8. Here's the link and it has the pic for the 50S muffler for the GD3 : Type One Racing :: Intake & Exhaust :: Fit/Jazz (GD3/4) :: T1R 50S Version 2.0 Sports muffler for Honda Fit 07-08 GD-3/4

stalonehong · #11 (**permalink**) 10-09-2009, 05:41 AM

is there a video or sound clip of what the b-pipe sounds like the for ge8? and would i be able to use it for my greddy se exhaust?

kenoshainflames · #12 (**permalink**) 10-10-2009, 04:31 PM

Quote:

Originally Posted by JCrimson

okay one more question, can you please clearify this.

T1R 63 Sports Exhaust System - 07+ Fit GD3 - JHPUSA

look at that. this is the part number 18000-GD3-50S
is that one n1 style? is it a full cat back? please show me more pics of this product. sorry to be off topic. im just ready to buy

that looks like version 1

xqwzit · #13 (**permalink**) 10-12-2009, 01:37 AM

muffler shipped to melbourne vic 3128, australia.
how much??

AJR Jay · #14 (**permalink**) 10-13-2009, 03:48 PM

Quote:

Originally Posted by xqwzit

muffler shipped to melbourne vic 3128, australia.
how much??

PM sent!

Regards,

Jason @ AJR

mykrojas · #15 (**permalink**) 10-13-2009, 03:51 PM

hi sir, is this the same muffler as for the j's racing muffler?

Quote:

Originally Posted by AJ PwR Jr.

Hi Guys,

The new T1R 50S muffler and the T1R 50S b-pipe are finally here

T1R 50S muffler
- bolt on to stock or any after market B-pipes
- 50mm piping with 1.2mm thickness (Ultra lightweight)
- Deep throaty tone
- We dynoed +4whp & 4ft/lbs torque
- precision quality with gradient finished tip
- MSRP $395CAD approx. $345USD **In stock now**

T1R 50S B-pipe
- Direct replaces OEM b-pipe
- 50mm main pipe with 1.2mm thick tubing (lightweight design)
- increases exhaust efficiency to optimize maximum power thorough the entire rpm range
- Precision quality
- MSRP $425CAD approx. $370USD **in stock now**

Buy both will receive FREE SHIPPING within the continental U.S. & Canada only !!!!!!

Any questions, please PM me or email us at info@aj-racing.com

Thanks
Ben @ AJR

AJ PwR Jr. · #16 (**permalink**) 10-14-2009, 11:05 PM

They are not the same. T1R muffler is made out of stainless and muffler design is different.

JDMxGE8 · #17 (**permalink**) 10-19-2009, 07:38 PM

The 4whp & 4lbs./tq gains were from using the OEM b-pipe or the T1R b-pipe?

AJ PwR Jr. · #18 (**permalink**) 10-19-2009, 11:18 PM

That's only the axle-back alone. We will be dynoing the exhaust with the b-ppipe and the T1R carbon intake next week.