Holes location for Spoon spolier

ccFit · #1 (**permalink**) 06-29-2006, 08:47 AM

Ben I need help, got the spolier last night, do you have any holes measurement / patten for the spolier since mine is not a sport? looks like the instruction from Spoon has some paper for the holes but I can't realld read those Japanese, Thx and thank you for all the parts.

dougiepants · #2 (**permalink**) 06-29-2006, 04:06 PM

Ben help this man out!!!

AJ PwR Jr. · #3 (**permalink**) 06-30-2006, 03:11 AM

Sorry for my late response. You should've call me

Anyways, the Spoon spoiler comes with a template and what you have to do is to fit the template on the hatch and a center punch it then drill the hole. I have the Sport but the orginally location of the stock wing won't line up either so I have to drill holes as well.

ccFit · #4 (**permalink**) 06-30-2006, 09:09 AM

i just look thru all the stuff and garbage there is no template, I will call you today

ccFit · #5 (**permalink**) 06-30-2006, 06:20 PM

thx Ben, got the fax

Rikaro · #6 (**permalink**) 07-06-2006, 06:01 AM

if i install a spoon rear spoiler on the fit, do i have to remove the rear wipers as well? is it possible to cut it shorter so it doesn't hit the spoiler?

ccFit · #7 (**permalink**) 07-06-2006, 09:12 PM

yes all you need is to cut 1/4" off the tip

revs to 9 · #8 (**permalink**) 07-29-2006, 07:50 PM

i have the spoon spoiler and don't have wiper issues.... is that a bad thing?

AJ PwR Jr. · #9 (**permalink**) 07-29-2006, 07:54 PM

It everything aligns properly, there's nothing for you to worry about.

dougiepants · #10 (**permalink**) 07-29-2006, 10:57 PM

I can't wait for mine... Can we get pics of the installed parts ccFit???

Raimondas · #11 (**permalink**) 07-30-2006, 01:57 AM

My rear wiper rubbed on the Spoon spoiler a bit after installation. Since the wiper arm is plastic, I removed the rubber blade then heated up the arm with a torch and bent a new 90 degree angle at the end instead of a straight cut off. I also didn't want to pay for a shorter antenna that decrease my reception so I bent the stock one. It is now a happy puppy dog tail

Hope these hold ya over dougiepants...

...

dougiepants · #12 (**permalink**) 07-30-2006, 12:06 PM

Thanks for the pics man. You did the wiper mod I was thinking about doing once I received my Spoon Sports CF Wing...

ccFit · #13 (**permalink**) 07-30-2006, 01:15 PM

Quote:

Originally Posted by dougiepants

I can't wait for mine... Can we get pics of the installed parts ccFit???

just took few pics for you, mine Spoon antenna doesn't touch the spolier at all

(Ben did you fix yours yet?)

HFit USA · #14 (**permalink**) 07-30-2006, 01:39 PM

damn that looks nice......im guessing yours isnt a sport cus i dont see any previious holes..

aziatiklover · #15 (**permalink**) 07-30-2006, 02:30 PM

damn that looks so good... but I'm going mugen way not spoon..... do u guys think I will need the spoon antenna if I get the mugen spoiler??

dougiepants · #16 (**permalink**) 07-30-2006, 06:49 PM

Mugen does not need it, but Spoon antenna looks better lol... Where do the holes show on the Sports Model?

ccFit · #17 (**permalink**) 07-31-2006, 09:27 AM

i don't think holes on the sport will show, ask Ben, but u do need to drill new holes

dougiepants · #18 (**permalink**) 07-31-2006, 07:32 PM

Yea I know we nee to drill new holes. I'm just excited about getting mine.

ccFit · #19 (**permalink**) 07-31-2006, 08:26 PM

oh for sure, this is exactly why we didn't get the sport, the Spoon spolier is so much better and is cheaper than the factory spolier too

thunderalley71 · #20 (**permalink**) 03-05-2007, 03:56 PM

wher did u order the spoiler how can i order it