wrench meet? :) - Page 7

saiko · #**121** (**permalink**) 08-18-2008, 07:29 PM

Yeah... I can do the springs in like 45 to an hour... probably half that with multiple teams... haha. center console takes 10 minutes... fenders... probably not that long...

who knows... maybe ill try and have something by then... (mid pipe anyone?)... you guys can help with that yes? hahah only if you guys are down

goodyonsen · #**122** (**permalink**) 08-18-2008, 07:43 PM

haha ya i want springs, tail lights, and mip pipe

los_creeper · #**123** (**permalink**) 08-18-2008, 07:44 PM

so far, you can add crank pulley and jdm led clear 3rd brake light to my list!

Evan_2k · #**124** (**permalink**) 08-18-2008, 07:58 PM

Quote:

Originally Posted by accordguyintake

we can meet at my house if its a good area for everyone, i have a brightly lit garage but you might wanna bring your own tools or at least some like a dremel if you're gonna install sidemarkers. And my street is a cul-de-sac with lots of places to park. Plus The Block of Orange is literally down the street to my house so we can just shoot photos there after, there are also other brightly lit places nearby like Lee's Sandwiches and Target

Here is my address if you wanna mapquest and check it out

Garden Grove, CA 92840

holy shit dude, i live at the same city and zip. im on brookhurst and garden grove near the weinershniztel and focus auto sale. haha im down, i need help installing some fogs onto the base model.

Fitting · #**125** (**permalink**) 08-18-2008, 08:01 PM

Don't forget my header.
Do I need any new gasket for my header install?

Goody someone is selling Skunk springs in the fs section.
FS: Wheels, Exhaust, springs (Skunk 2 & Motegi)

Evan_2k · #**126** (**permalink**) 08-18-2008, 08:02 PM

1. accordintakeguy (Jason)
2. gimme (Dan)
3. junior40er (adrian)
4. los_creeper (dave)
5. jazn (jason)
6. Lunar_gd3 (Eddy)
7. Fitting (Ken)
8. JamesBizzle... put me down as a Maybe...
9. Evan_2k( Evan)
10.

jazn · #**127** (**permalink**) 08-18-2008, 08:13 PM

Quote:

Originally Posted by los_creeper

so far, you can add crank pulley to my list!

I think crank pulley is the only thing gona be on my list too, and i have to take off my bumper to put the dust boot back onto my beatlight housing.. thats about it.. easy breezy.

As far as the springs.. you can get some SKUNK2's for 135, i know the dealer. PM me if you want some skunks.

jazn · #**128** (**permalink**) 08-18-2008, 08:15 PM

Quote:

Originally Posted by Evan_2k

holy shit dude, i live at the same city and zip. im on brookhurst and garden grove near the weinershniztel and focus auto sale. haha im down, i need help installing some fogs onto the base model.

all three of us live next to each other. you know i live brookhurst and chapman.

92840 is my zip as well.

cKranez · #**129** (**permalink**) 08-18-2008, 10:08 PM

rims? if possible

Quote:

Originally Posted by gimme

I think i remember seeing springs, center console, fender braces, side markers and i think Tail Lights. that's all i remember

Nothing to be installed on my side, just going to help out with the installs

los_creeper · #**130** (**permalink**) 08-19-2008, 12:12 AM

and these are all i could get now, to have in time for the meet; mugen header & aem cai... i tried for more but not all parts were in stock, and again, a few were required to install at the same time so... maybe another meet before the end of the year? or perhaps after new years when everybody has money for parts! lol!

junior40er · #**131** (**permalink**) 08-19-2008, 12:25 AM

well do another after this one :]

Well prolly do one after every few months I think. I'm sure people will be down for somehting like this ;8er on. Youre still showing up right?

QuickGD3 · #**132** (**permalink**) 08-19-2008, 12:38 AM

Anybody from the wrench meet have experience installing the skunk2 pro c coilovers???

junior40er · #**133** (**permalink**) 08-19-2008, 12:46 AM

nope, not me. but I'll be installing Ksport Coilovers so it should be about the same thing.

jazn · #**134** (**permalink**) 08-19-2008, 01:38 AM

Quote:

Originally Posted by QuickGD3

Anybody from the wrench meet have experience installing the skunk2 pro c coilovers???

Coilovers and spring are easy. in fact, coilover are EASIER than springs cause you dont have to take apart the mcpherson front strut and get the spring off from around the strut, Coilovers are easy ass direct replacements.

JamesBizzle · #**135** (**permalink**) 08-19-2008, 07:32 AM

I got a duck bill... anyone down to drill my holes for me? I'm scared.

los_creeper · #**136** (**permalink**) 08-19-2008, 11:36 AM

David, i know you read this... if you didn't spill it all when you ran over it, could you bring that little can of black paint that you used for your calipers? ¿por favor?

gimme · #**137** (**permalink**) 08-19-2008, 12:48 PM

Quote:

Originally Posted by cKranez

rims? if possible

yes, those too

goodyonsen · #**138** (**permalink**) 08-19-2008, 01:43 PM

Quote:

Originally Posted by Fitting

Don't forget my header.
Do I need any new gasket for my header install?

Goody someone is selling Skunk springs in the fs section.
FS: Wheels, Exhaust, springs (Skunk 2 & Motegi)

Ya I've been PM that guy but he hasn't replied

$135 is a good deal thats the lowest i been quoted for new ones

saiko · #**139** (**permalink**) 08-19-2008, 03:06 PM

Ok well I will have my mid pipe forsure by then. See you guys there!

Keep me update if anything changes!

Junior40er... add me to the list! =]

goodyonsen · #**140** (**permalink**) 08-19-2008, 03:12 PM

This is gonna be great. my gf wants to go haha

1. accordintakeguy (Jason)
2. gimme (Dan)
3. junior40er (adrian)
4. los_creeper (dave)
5. jazn (jason)
6. Lunar_gd3 (Eddy)
7. Fitting (Ken)
8. JamesBizzle... put me down as a Maybe...
9. Evan_2k( Evan)
10. goodyonsen (David)
11. saiko