How to get codes and clear TPMS light?
#2
i think you physically need the TPMS RF modules in order to 'clear' the codes.
during the winter my GE has TPMS come on due to snow tire set i have without the TPMS modules...and in the spring when i put the stockers back on the TPMS light goes away automatically.
during the winter my GE has TPMS come on due to snow tire set i have without the TPMS modules...and in the spring when i put the stockers back on the TPMS light goes away automatically.
#3
Well, I had the same lamp
DIAGNOSE CODE 35-1 tire 3 SENSOR LOW VOLTAGE
SOLVED "REPLACE SENSOR AND RELEARNED SYSTEM"
If you are a lucky boy check your TPMS fuse,if not, you already Know
#4
i have a 2010 honda fit sport. while i was doing the paper work they were cleaning it and im assuming they put air in the tires without checking the psi. an hour after i was home the light came on "TPMS" this morning i went out there with a tire gauge and all the tires were well over 33 psi so i let some air out and drove it maybe 1/2 a mile and the light came off. The light will come on if too much air is in the tires
Thread
Thread Starter
Forum
Replies
Last Post
Brain Champagne
2nd Generation (GE 08-13)
16
05-14-2011 01:51 PM