Fit Exhaust SystemsThreads discussing exhaust related topics including headers, cats/test pipes, b-pipes, and cat-back & axle-back systems for the Honda Fit
Welcome to Fit Freak!
Welcome to Fit Freak,
You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, so please join our community today!
It's too cold at the moment, but I've been under there enough times with ramps to know that even with an extra 10 inches it's cramped to get in there with a wrench and go back and forth a bunch of times. I'm sure it's possible to squeeze yourself in there but I can't imagine it being a pleasant experience.
yeah i would definately just recommend just jacking the car up. sure it takes an extra 5 minutes or so but wouldnt you rather have that then be super cramped and uncomfortable underneat the car
idk man, i'm 6'2" and 170 on a bad day, maybe my arms are just too long but it's not very comfortable down there. The only benefit I could see is that my arms are long enough that I might be able to rest my elbow on the floor so my arm doesn't get cramped trying to keep it suspended lol.
i'm selling my WSII exhaust so i'm currently running muffler-less...... no offense to anyone else but i don't like what i'm hearing
i've only got a modified stock airbox with K&N high flow filter and a header - it's LOUD. the decibel app i have on my iPhone reads 108db at 3k rpm. to make matters worse i feel a definite drop in power. it's like i'm driving a stock Fit with lots of noise... i'm going to have to find a replacement exhaust ASAP
Take it to a muffler shop with the stock or after market axle back pipe and muffler and have them bend and weld up an axle back pipe and glass back with an exhaust tip of your choice..... Just a pipe minus muffler exiting behind the bumper will be quieter inside the car. A glass pack lowers the tone to a softer rumble than an after market fart can. The noise is pleasant to me and about equal to the road noise from the tires and wheels at highway speeds, but with the throttle down at higher revs it sounds like an Austin Healey 100 4, except not as droning higher speeds ..... No power loss that I can notice any where in the power band, and my neighbor who is a light sleeper who keeps his windows open says that I have never awakened him, even when his windows are open.... What I like the most, it was cheap. I have been driving with this set up since August 2006.
selling my expendable exhaust components for more suspension work
i figured that's the cheapest way i'm ever going to have any fun in the Fit.
Quote:
Originally Posted by Texas Coyote
Take it to a muffler shop with the stock or after market axle back pipe and muffler and have them bend and weld up an axle back pipe and glass back with an exhaust tip of your choice..... Just a pipe minus muffler exiting behind the bumper will be quieter inside the car. A glass pack lowers the tone to a softer rumble than an after market fart can. The noise is pleasant to me and about equal to the road noise from the tires and wheels at highway speeds, but with the throttle down at higher revs it sounds like an Austin Healey 100 4, except not as droning higher speeds ..... No power loss that I can notice any where in the power band, and my neighbor who is a light sleeper who keeps his windows open says that I have never awakened him, even when his windows are open.... What I like the most, it was cheap. I have been driving with this set up since August 2006.
my brother used to have a glasspack cherry bomb on his ef hatch that was really raspy and buzzed like a coffee can. i've never even considered this for the Fit because of that.
BUT after reading your description it sounds like it may be a different experience altogether. would you happen to have any sound clips? how much did it cost? a ball park figure would be nice incase i decide to go this route
I can't remember exactly but I took in the tip that I bought out of a J.C.Whitney catalogue and the 2 1/2" pipe and 12" generic muffler + labour was around $80.00. There is a guy on YouTube that went the same route but used an Auto Zone muffler and tip and his sounds a lot like mine.I'll try to find it on you tube. " 2007 Honda Fit with cheap weld on muffler". Actually after listening to the YouTube muffler, I think it sounds raspy . You mentioned Cherry Bombs, They came out when I was a teenager and were popular because the were louder than Smitty's which were pretty loud. There is room for a longer muffler than what I used.
I cant tell you how many mufflers I have had cut off and then put a borla tip on. Product Image
Joe
__________________
If you need shipping than Logistics For The Little Guy is for you! I make the impossible made possible.
Save money get it when you want it Logistics4LG@gmail.com
Today I took the muffler off of my GE and drove it around for about 30 mins. Wow it was way too loud for me, gave me a headache I took some video of it i will post a link when I get it up on youtube.
If you dont like it the dont read it. you obviously found it interesting enough to read on. I did this than set up a not so straight pipe so i have a nice dual tip comming out the center. I hat to remove that steel thing hangin ther and add some heat sheilding for saftey lol. this looks awsome and only cost me $30 cuz i welded it myself and had some pipe laying around.
Last edited by chuckvidler; 11-09-2009 at 09:31 AM.
If you dont like it the dont read it. you obviously found it interesting enough to read on. I did this than set up a not so straight pipe so i have a nice dual tip comming out the center. I hat to remove that steel thing hangin ther and add some heat sheilding for saftey lol. this looks awsome and only cost me $30 cuz i welded it myself and had some pipe laying around.
Linear Mode
