Honda Emblems, RED emblems, CF emblems, emblems questions

[JamesBizzle]

Originally Posted by B2L2

Question here for removing the rear badge. Am I suppose to "break" away the 2 pins behind the rear badge before pulling the badge out?

I followed FitSport's approach and I could see the 2 pins. I'm just not sure whether I should push the 2 pins out or "break" them instead.

Thanks,
- Brian

yup, break them. don't be scared to slap the butt of the driver hard so that the tip of it breaks the pins. it's a very simple process and you won't mess anything up as long as you're carefull.

[vince]

does anyone have a picture of a black fit with the jdm emblem? I want to see how it will look like if i decided to do that =p. I'd greatly appreciate it. THANK YOU!

[sillypuddy]

google is your friend..



-joe

[fitoromocto]

Where did you order yours emblem and how much if you dont mind me asking.
Look good..

[Mugen_Dom]

Originally Posted by fitoromocto

Where did you order yours emblem and how much if you dont mind me asking.
Look good..

A&J have it for just under CDN$50

http://www.aj-racing.com/catalog/pro...&cat=60&page=2

[sillypuddy]

fitoromocto, whereabouts are you?

-joe

[fitoromocto]

Fredericton / Oromocto N-B
Storm Silver Sport MT

[ashsblrsxtrg2006]

i have a us honda fit and i want to get the jazz emblem on it. does anybody know how to safely remove the fit emblem and replace it with the jazz one?

[Fit of RAGE]

all you need is a heat gun and/or blow dryer and just heat up the emblem. (they are taped on) then, VERY carefully, use a NEW razor blade (AT YOUR OWN RISK) and gently cut one corner off of the emblem between the emblem and the trunk. After you cut enough for your hand to grab on to, SLOWLY peel teh emblem off. Then just take some cleaner and take off the residue. I did this with my 4Runner and it took about 2 minutes. If you are using a heat gun, DO NOT heat up the paint. Keep the blow dryer/heat gun CONSTANTLY moving!!!

[Fit of RAGE]

Originally Posted by claymore

Or instead of the razor blade just get a piece of DENTAL FLOSS and slide it under one corner and just like flossing drag the floss behind the badge.... No chance of paint damage.

yeah, that's probably a better and safe idea!!

[rcantu]

yes floss or a PLASTIC putty knife.

[ashsblrsxtrg2006]

wat happens if i change it and then i get pulled over and the cop finds out that its not a jazz but a fit? would i get in trouble for that?

[fits_all]

getting this post straight, in ebay theres a sale for "red dot fit emblem" but the guy told me its aftermarket and not "jdm". To my understanding, in Japan it comes like this factory. Anyone knows where I can get this, or is it really an aftermarket emblem?

[Fit of RAGE]

the link doesn't work

[fits_all]

YUP I know, the way to post pics in here is kinda f'ed. might try it in here
eBay Motors: HONDA FIT EMBLEM WITH RED DOT, CIVIC, ACCORD (item 150025469173 end time Feb-17-07 14:28:47 PST)

[firstshadow]

i found a site with silver, black, and white H emblems... it says for s2000 but would they fit on the fit?

[JDMchris.com]

im sure they would fit....... however they wouldnt fit good..... the S2000 emblems are ALOT smaller than the fit ones.

[Deivioncrx]

idk about the front one but the rear would be eazy, just pop off the stock emblem, trace around it, then find some vinyl in whatever color you want, and cut out a piece the size of the emblem, then just stick it on under the emblem, you can peel it back off anytime you want to, and it shouldnt cost more than a few bucks. the front is a different story, you probably would have to remove the chrome H, tape off and paint the black plastic behind it whatever color, then pop the H back on it.

[Fit of RAGE]

Yup, i made my own Carbon Fiber rear "H" emblem.

Mind you it was raining when i did it so it looks really dirty and scratched up, but here it is:

[firstshadow]

i wonder if there are ones somewhere around that will fit the fit perfectly lol that would rock, id want to get the silver or black ones.