Custom Exhaust Finisher/Tailpipe Extender for 2015/2016 FIT
#1
03-10-2016, 06:23 PM
Custom Exhaust Finisher/Tailpipe Extender for 2015/2016 FIT
No one manufactures one for 2015 or 2016 FIT because the pipe curves downward.
Found this guy last year who custom makes chrome ones for 2015 FIT.
It clamps on tight.
Makes my FIT look a whole lot better from the Rear.
------------
1/2018: It rusted and discolored and I had to discard it. Don't get it.
Found this guy last year who custom makes chrome ones for 2015 FIT.
It clamps on tight.
Makes my FIT look a whole lot better from the Rear.
1/2018: It rusted and discolored and I had to discard it. Don't get it.
Last edited by FITEsq; 01-31-2018 at 02:51 AM. Reason: Update
#6
01-31-2018, 02:49 AM
Sorry about the photos.
Maybe that is a good thing because I recently had to remove and discard the tailpipe extension because it rusted and discolored.
Best to buy only Honda parts. But they don't make one for model years 2015, 2016 or 2017.
If there is an administrator for this section--I would just remove the thread that I started. No point to it at this point.
Thank you.
Maybe that is a good thing because I recently had to remove and discard the tailpipe extension because it rusted and discolored.
Best to buy only Honda parts. But they don't make one for model years 2015, 2016 or 2017.
If there is an administrator for this section--I would just remove the thread that I started. No point to it at this point.
Thank you.
#7
04-08-2018, 01:43 PM
I've bought a couple from vendors in China. They don't last through the winter despite being "stainless steel" (yeah, right). My solution is to take it off in the fall and reinstall in the spring. Nobody is noticing your tailpipe in the winter, anyway.
#8
08-21-2018, 10:39 AM
How bout...
I know this is old, but on the off chance anyone is still looking-
The ‘18 Sport has a pretty decent oem tailpipe finisher, I’d imagine it would be just right. You may even find one here, lotsa folks with aftermarket pipes who don’t need the oem bits anymore. Also, Honda must use a similar design on another vehicle in the lineup, so you could always use a tip made for a Civic,etc.
If that doesn’t work, you can use the cheap ‘stainless steel’ kind and hit it with a few coats of clearcoat before you put it on. Snow, salt, sand, is gonna eat up a Chinese piece but you can help it last longer.
The ‘18 Sport has a pretty decent oem tailpipe finisher, I’d imagine it would be just right. You may even find one here, lotsa folks with aftermarket pipes who don’t need the oem bits anymore. Also, Honda must use a similar design on another vehicle in the lineup, so you could always use a tip made for a Civic,etc.
If that doesn’t work, you can use the cheap ‘stainless steel’ kind and hit it with a few coats of clearcoat before you put it on. Snow, salt, sand, is gonna eat up a Chinese piece but you can help it last longer.
Thread
Thread Starter
Forum
Replies
Last Post
laughter95
3rd Generation (2015+)
7
12-23-2015 11:17 PM