KraftWerks Supercharger Kit Info v4.0 - Page 32

xorbe · #**621** (**permalink**) 06-09-2009, 08:36 PM

once the CA gov't collapses and CARB is no longer in effect, then I can wedge the 10# kit into my automatic, muhaha ...

revd34 · #**622** (**permalink**) 06-10-2009, 02:26 AM

so how many of you socal guys (or people that will travel) are going to the KraftWerks Dyno Day?

i'm thinking about going

JDMchris.com · #**623** (**permalink**) 06-10-2009, 02:44 AM

I will be there. Kelso is coming down from teh bay for it too.

DynamicFit · #**624** (**permalink**) 06-10-2009, 05:53 PM

I'm curious about who's going to be allowed onto the dyno for the dyno challenge. I know the Jacksons arent going to put their own car on, but are there going to be people with the 10lb kit running and turbocharged fits? Just curious cause I know how much I'm making and don't want to get on there and get massacred by dudes running twice the boost.

revd34 · #**625** (**permalink**) 06-11-2009, 05:27 PM

Quote:

Originally Posted by DynamicFit

I'm curious about who's going to be allowed onto the dyno for the dyno challenge. I know the Jacksons arent going to put their own car on, but are there going to be people with the 10lb kit running and turbocharged fits? Just curious cause I know how much I'm making and don't want to get on there and get massacred by dudes running twice the boost.

i believe everyone is allowed. i would dyno my car just to see what i'm making. $30 for dyno is a really really good price

Jesse · #**626** (**permalink**) 06-12-2009, 08:33 AM

someone take pictures of the new intercooler for highboost. this wait is getting to be too long

Tofuman · #**627** (**permalink**) 06-12-2009, 04:03 PM

I'm going to the dyno day. I'm not going to dyno my car as I'm not boosted - and I don't have much in the way of power mods... but at $30 for 3 runs, that's tempting... boosted or not.

chinkyy · #**628** (**permalink**) 06-13-2009, 06:21 PM

does anyone have an ETA for the

HIGH BOOST KIT?????????????????

keepitpg · #**629** (**permalink**) 06-13-2009, 06:30 PM

its gonna be released at the dyno challenge.. is what i heard.

chinkyy · #**630** (**permalink**) 06-13-2009, 06:35 PM

o i see when will the public be able to purchase this kit? and does anyone have an approximate price range for the high boost?

Texas Coyote · #**631** (**permalink**) 06-13-2009, 06:42 PM

I spoke to Kraft Werks over the phone 2 weeks ago and was told that it would be out toward the end of summer. I couldn't get anything on the price.

chinkyy · #**632** (**permalink**) 06-13-2009, 06:52 PM

really? i just called them and it went straight to voice mail. so i would have to purchase the base kit then upgrade with/to the high boost kit? would i still have to buy the reflash package?

MNfit · #**633** (**permalink**) 06-13-2009, 06:52 PM

Need your help guys I was wondering what the gap was you guys set for your spark plugs? My car has been running like shit for a couple weeks. Today the car threw a CEL and would not go past 3K with out sputtering like crazy. So I pulled the plugs and they where black as hell. I ran to O'reilly but they dint have the NGK's so I got autolites. Car still doesn't run very well past 5K but does seem to idle better. I got the codes pulled and it said miss fires on multiple cylinders. Im realy hopping the problem is im running these cheep ass plugs. Im going to swich back to NGK's but I was jsut wodnering what you guys where running for the gap.

Thanks for your help and sorry for the long post.

Texas Coyote · #**634** (**permalink**) 06-13-2009, 07:13 PM

A closer gap is said to work better with boost or high compression. It sounds like you may have a vacuum leak and that you are operating in open mode. Trace the hoses back from the super card to see if that is the problem and any other hoses, like to a vacuum gauge. I am doing fine with the stock plugs that I had to install after a vacuum problem caused my others to foul.

Texas Coyote · #**635** (**permalink**) 06-13-2009, 07:26 PM

Quote:

Originally Posted by chinkyy

really? i just called them and it went straight to voice mail. so i would have to purchase the base kit then upgrade with/to the high boost kit? would i still have to buy the reflash package?

I believe that the high boost kit includes the reflash and injectors. You can also get the AEM self tuning programmer and injectors in your choice of larger size elsewhere but you won't be able to raise the rev limiter setting or eliminate the speed governor like the reflash does. I know that everyone with the 5 Lb kit has to remove the electronics that came with their kit and purchase the add ons.

Koi · #**636** (**permalink**) 06-13-2009, 09:53 PM

Quote:

Originally Posted by MNfit

Need your help guys I was wondering what the gap was you guys set for your spark plugs? My car has been running like shit for a couple weeks. Today the car threw a CEL and would not go past 3K with out sputtering like crazy. So I pulled the plugs and they where black as hell. I ran to O'reilly but they dint have the NGK's so I got autolites. Car still doesn't run very well past 5K but does seem to idle better. I got the codes pulled and it said miss fires on multiple cylinders. Im realy hopping the problem is im running these cheep ass plugs. Im going to swich back to NGK's but I was jsut wodnering what you guys where running for the gap.

Thanks for your help and sorry for the long post.

I'm running NGK iridiums at .32" and haven't run into any problems.... yet.

Koi · #**637** (**permalink**) 06-13-2009, 10:35 PM

Just ran the car after going on a short 1 week vacation. Rough start but afterwards it was smooth sailing - it feels smoother and sounds mellower than I remember. Still loving the KWSC kit, let's keep the ball rolling KW!

Texas Coyote · #**638** (**permalink**) 06-13-2009, 10:59 PM

Glad you had a good vacation and your car is working better.

Koi · #**639** (**permalink**) 06-13-2009, 11:03 PM

Quote:

Originally Posted by Texas Coyote

Glad you had a good vacation and your car is working better.

Thanks. Your car/kit is doing fine as well I hope?

awptickes · #**640** (**permalink**) 06-13-2009, 11:13 PM

Has anyone modified the GD kit to fit the GE8 yet?

Or am I going to have to be the first one to do it?