You ICE GURUs... I need some wiring help

[JDMchris.com]

Ok. So im wiring up my headunit right now. I have 2 harness coming out of my headunit. I matched up all the colors to the Scosche harness... but now I have a free Blue wire(antenna control), and a blue/white wire(system remote control)

Where do these blue wires go? there are female connectors on each of them.

[JDMchris.com]

Ok so I wired up the headunit harness to my scosche kit harness... on the headunit harness I have the Blue wire(antenna control), purple (reverse gear signal) which goes to the rear taillight, pink(speed signal input), black(ground) which is obvious, and the blue/white(system remote control)



On the scosche harness I have black(ground), pink(says TEL MUTE), black/white(doesnt say anything), brown(doesnt say anything), orange/black(dimmer ground), green/white(doesnt say anything).



Do i hook up speed signal input to the pink on the scosche? or does that need to be connected to the ECU? The scosche doesnt have any blue wires so where would those go? Do anything go connected to the unused wires on my scosche harness? Please help as I want to install this asap... Just want to get most everything done before it goes in! TIA!

[Rod2Rice]

Well the blue antenna control is probably for a power antenna, so hopefully you got the antenna adapter harness, otherwise you wont be able to hook the antenna up. If you do have that harness, thats where the blue wire from the scosche kit goes.

Not sure what the speed signal wire is, so can't help you there.

I dont recall my scosche kit having so many wires on it! Hope I helped at least a little.

[gimme]

i'm in the same boat...all matching wires conected and i still have extras. weak!

[Injundon]

tghe blue/white is an amplifier turn on wire.. no amp, no use wire..

the solid blue if for the antenna amplifier all new hondas have. Most people have been getting beter luck not hooking this wire to the antenna adapter. so up to you if you want to use it or not. If they are not in use, please tape the ends up!!!!

[mrwilli1]

I would recommend you connect the blue wire to your antenna adapter. If you don't, you run the risk of lousy radio reception.

[JDMchris.com]

i was missing the antenna adapter... this is why i was freaking out.. I got one and installed this yesterday and it all went flawless!

[gimme]

damnit! so chris, did you do a video bypass? or did you do it the legit way?

[Injundon]

Chris bought a Pioneer, depending which model you hav to move a Pin on the RCA plug also to do a bypass. since the navigation will cut off at any speed over 3mph and tll you handbrake wire is impropperly connected

[JDMchris.com]

Originally Posted by Injundon

Chris bought a Pioneer, depending which model you hav to move a Pin on the RCA plug also to do a bypass. since the navigation will cut off at any speed over 3mph and tll you handbrake wire is impropperly connected

Yup! Its real easy tho... Move that 1 pin (mute wire) and ground it along with the ebrake wire.

[Injundon]

. yup.

[Fa1]

So where's the diy?

[gimme]

dude, chris.......how many wires did you have left over on the scosche supplied harness?

[JDMchris.com]

4 i think...

[gimme]

oh okay, i am along the same lines. *whew*