aftermarket seats and seat rail questions
#22
Originally Posted by dougiepants
Any fitment report on the J's and Alex rails Ben?
*there's airbag sensor on both seats. On the passenger side, you will need to take it off the seat and make a bracket to holt it with the seat belt. Older Hondas has the belt bolted to the B-pillar but on the Fit it has bolten on the seat.
The driver seat is pretty easy to remove but the passenger was a bitch to take off so when anyone of you try to do it, just make sure you becareful otherwise you will scratch up the panels.
Thanks
Ben
#28
Originally Posted by MK GD3
Here are some pics of installed bride seat rails /jdm recaor's in my fit
Fitment is almost 100%
However passenger airbag module/sensor/whatever--- needs to be mounted on the side if factory seat belts are to be retained!
Enjoy!
http://boomplustoys.net/fit/128.jpg
http://boomplustoys.net/fit/134.jpg
Fitment is almost 100%
However passenger airbag module/sensor/whatever--- needs to be mounted on the side if factory seat belts are to be retained!
Enjoy!
http://boomplustoys.net/fit/128.jpg
http://boomplustoys.net/fit/134.jpg
#34
Originally Posted by drunken_Monkey
looks good man, how long did it take you?
however the passenger side took a bit longer to take out
all in all with fone calls and stuff it took me about one hour to do both!