GI: Fit Chassis Brace Sets!
#1
GI: Fit Chassis Brace Sets!
GB POSTED!!!
https://www.fitfreak.net/forums/gaug...race-sets.html
Pics have arrived!:
Fit (GD)
(GD)Front Strut Bar
(GD)Rear Strut Bar
(GD)C-Pillar Bar
(GD)Lower Tie Bar
(GD)4 Point Front Sub-Frame Brace
(GD)Side Member Brace
Fit (GE)
(GE)Front Strut Bar
(GE)Rear Strut Bar
(GE)Front Lower Tie Brace
(GE)4 Point Front Sub-Frame Brace
(GE)Mid Chassis Tie Bar
(GE)4-Point Mid Chassis Ladder
(GE)Rear Sway Bar Reinforcement Brace
UPDATE 10/19/2010: The parts have touched US soil now! They are in Ohio! If all goes well through customs, we should have them tomorrow or the next day! Thanks for being patient! Pics will be here soon!!
UPDATE 9/27/2010: Hey Everyone, the test kit is ready however they are still fulfilling the rest of our order! The national holiday is October 1st through 7th. KMR has confirmed that these will be sent on the 8th or possibly sooner! We're expecting these mid October! We'll keep you updated!
UPDATE 9/21/2010: Test kit ordered!
UPDATE 9/6/2010: Test kit to be ordered 9/19!
UPDATE 9/1/2010: 2nd Gen pricing has been posted! If there is enough interest, we can start a GB soon!
UPDATE 8/31/2010: 1st Gen pricing has been posted! We are still confirming pricing for the 2nd Gen with the manufacturer! If we do a GB, there will be additional discounts as well depending on the size of the bulk order!
Hey Everyone,
I just got back from Taiwan doing a lot of research on what's available for Hondas and found a quality company called KMR that offers a wide selection of suspension parts for Hondas and other vehicles. We are introducing KMR chassis braces to the US market for the (07-08) Fit and (09+) Fit at very competitive pricing!
We are authorized vendors on Mazdas247.com and are currently expanding into other markets. This is purely a gauging interest thread.
If there is enough interest, we will order test sets for each model and test fit them on local Hondas to confirm proper fitment on US spec Fits. Once fitment is confirmed, we will begin offering parts to members!
Here are the parts available:
(07-08) Fit:
- Front Strut Bar (1) ---------------------GB Price: $145 SHIPPED -------Retail: $159
- 4 Point Front Sub-Frame Brace (2)----GB Price: $105 SHIPPED -------Retail: $119
- Front Lower Tie Brace (5)-------------GB Price: $79 SHIPPED -------Retail: $95
- Rear Side Brace (3 & 4)----------------GB Price: $79 SHIPPED -------Retail: $95
- Rear Strut Bar (7)----------------------GB Price: $135 SHIPPED -------Retail: $159
- C-Pillar Bar (6)-------------------------GB Price: $135 SHIPPED -------Retail: $159
================================================== ===============================
(09+) Fit:
Pricing:
- Front Strut Bar (1) -------------------------GB Price: $155 SHIPPED -------Retail: $169
- Front Lower Tie Brace (2)------------------GB Price: $79 SHIPPED -------Retail: $95
- 4 Point Front Sub-Frame Brace (3)---------GB Price: $105 SHIPPED -------Retail: $119
- 2 Point Mid-Chassis Tie Bar (4)-------------GB Price: $85 SHIPPED -------Retail: $109
- 4 Point Mid-Chassis Ladder Brace (5)-------GB Price: $165 SHIPPED -------Retail: $179
- Rear Sway Bar Reinforcement Brace (6)----GB Price: $230 SHIPPED -------Retail: $249
- Rear Lower Tie Bar (7) ---------------------GB Price: $135 SHIPPED -------Retail: $159
Discounts:
If this is something you are interested in or if you have any questions, please post!
Thank you!
Tony
support@tigertuning.com
https://www.fitfreak.net/forums/gaug...race-sets.html
Pics have arrived!:
Fit (GD)
(GD)Front Strut Bar
(GD)Rear Strut Bar
(GD)C-Pillar Bar
(GD)Lower Tie Bar
(GD)4 Point Front Sub-Frame Brace
(GD)Side Member Brace
Fit (GE)
(GE)Front Strut Bar
(GE)Rear Strut Bar
(GE)Front Lower Tie Brace
(GE)4 Point Front Sub-Frame Brace
(GE)Mid Chassis Tie Bar
(GE)4-Point Mid Chassis Ladder
(GE)Rear Sway Bar Reinforcement Brace
UPDATE 10/19/2010: The parts have touched US soil now! They are in Ohio! If all goes well through customs, we should have them tomorrow or the next day! Thanks for being patient! Pics will be here soon!!
UPDATE 9/27/2010: Hey Everyone, the test kit is ready however they are still fulfilling the rest of our order! The national holiday is October 1st through 7th. KMR has confirmed that these will be sent on the 8th or possibly sooner! We're expecting these mid October! We'll keep you updated!
UPDATE 9/21/2010: Test kit ordered!
UPDATE 9/6/2010: Test kit to be ordered 9/19!
UPDATE 9/1/2010: 2nd Gen pricing has been posted! If there is enough interest, we can start a GB soon!
UPDATE 8/31/2010: 1st Gen pricing has been posted! We are still confirming pricing for the 2nd Gen with the manufacturer! If we do a GB, there will be additional discounts as well depending on the size of the bulk order!
Hey Everyone,
I just got back from Taiwan doing a lot of research on what's available for Hondas and found a quality company called KMR that offers a wide selection of suspension parts for Hondas and other vehicles. We are introducing KMR chassis braces to the US market for the (07-08) Fit and (09+) Fit at very competitive pricing!
We are authorized vendors on Mazdas247.com and are currently expanding into other markets. This is purely a gauging interest thread.
If there is enough interest, we will order test sets for each model and test fit them on local Hondas to confirm proper fitment on US spec Fits. Once fitment is confirmed, we will begin offering parts to members!
Here are the parts available:
(07-08) Fit:
- Front Strut Bar (1) ---------------------GB Price: $145 SHIPPED -------Retail: $159
- 4 Point Front Sub-Frame Brace (2)----GB Price: $105 SHIPPED -------Retail: $119
- Front Lower Tie Brace (5)-------------GB Price: $79 SHIPPED -------Retail: $95
- Rear Side Brace (3 & 4)----------------GB Price: $79 SHIPPED -------Retail: $95
- Rear Strut Bar (7)----------------------GB Price: $135 SHIPPED -------Retail: $159
- C-Pillar Bar (6)-------------------------GB Price: $135 SHIPPED -------Retail: $159
================================================== ===============================
(09+) Fit:
Pricing:
- Front Strut Bar (1) -------------------------GB Price: $155 SHIPPED -------Retail: $169
- Front Lower Tie Brace (2)------------------GB Price: $79 SHIPPED -------Retail: $95
- 4 Point Front Sub-Frame Brace (3)---------GB Price: $105 SHIPPED -------Retail: $119
- 2 Point Mid-Chassis Tie Bar (4)-------------GB Price: $85 SHIPPED -------Retail: $109
- 4 Point Mid-Chassis Ladder Brace (5)-------GB Price: $165 SHIPPED -------Retail: $179
- Rear Sway Bar Reinforcement Brace (6)----GB Price: $230 SHIPPED -------Retail: $249
- Rear Lower Tie Bar (7) ---------------------GB Price: $135 SHIPPED -------Retail: $159
Discounts:
- If GB surpasses 15 items, everyone gets 10% off
- If GB surpasses 30 items, everyone gets 15% off
- In addition, take 5% off when you order 2 or more items!
If this is something you are interested in or if you have any questions, please post!
Thank you!
Tony
support@tigertuning.com
Last edited by Tiger Tuning; 01-23-2011 at 12:27 AM.
#3
Material is what exactly for the under pieces?
I wish companies would stop making tower bars with a single bolt on each side, this still allows some play even if tightened down to maximum. With 2 bolts on each side, that play pretty much disappears as there is not a single pivot point on each side. Better still would be to just make it without a pivot point whatsoever and have it welded solid.
I wish companies would stop making tower bars with a single bolt on each side, this still allows some play even if tightened down to maximum. With 2 bolts on each side, that play pretty much disappears as there is not a single pivot point on each side. Better still would be to just make it without a pivot point whatsoever and have it welded solid.
#5
Material is what exactly for the under pieces?
I wish companies would stop making tower bars with a single bolt on each side, this still allows some play even if tightened down to maximum. With 2 bolts on each side, that play pretty much disappears as there is not a single pivot point on each side. Better still would be to just make it without a pivot point whatsoever and have it welded solid.
I wish companies would stop making tower bars with a single bolt on each side, this still allows some play even if tightened down to maximum. With 2 bolts on each side, that play pretty much disappears as there is not a single pivot point on each side. Better still would be to just make it without a pivot point whatsoever and have it welded solid.
#6
Thanks for replying back. Any ideas on pricing whatsoever?
#7
We have pricing already. Are we allowed to post pricing without becoming supporting vendors? Some forums require vendor status...I've contacted the admins but still waiting on reply. If not, I will post approximate pricing stat!
#9
Interested in the subframe, will this go onto the JDM/AUDM jazz? Would also be interested in the price
#10
Hm. This I'm not entirely sure. I believe the Taiwan spec Fit is the same as the US. Is the JDM's only difference the RHD?
#12
Very interested in o9 parts
#14
#16
I like the idea of 6061 aluminum alloy being used for bracing, much stiffer than steel tubing but soaks up vibration instead of resonating like steel.... I am hoping these parts are priced right if they can be marketed for GD3s.
#17
Thanks for the interest everyone! I assure you this is not just a teaser! We will post retail pricing and possible GB pricing tonight!
Also, is there any interest in the 1st gen Fit? Or is the majority modding the 2nd gen?
Also, is there any interest in the 1st gen Fit? Or is the majority modding the 2nd gen?
Last edited by Tiger Tuning; 08-31-2010 at 06:48 PM.
#18
I'm pretty sure the AUDM fit is just RHD, and i think a different front end. Otherwise they are the same. Looking forward to the pricing, and I'm interested in first gen (GD3).
#19
First gen pricing posted! 2nd gen pricing to come (still negotiating)! Also, with group buy, we will include further discounts depending on how many orders we get total!