FS: SPOON twin-block 4pot calipers for DA/DC/DB/EG/EK/GD

[spoonek4]

Like to see if anyone here planning to upgrade their front brakes here....This is what I got:

spoon twin-block 4pot calipers $1350obo (brand new)

**LOCAL pickup only**





For further info please feel free to PM me, tks!

[Bassplayer]

Daaammmn so sexy....

[keepitpg]

me want but no money!

[CamFit]

Dead Sexy!

other that custom bracket... and some nice braded steele lines and rotors ... what master would one use to get the full potential of theese breaks?
thanks in advance
Cam

[kelsodeez]

Originally Posted by CamFit

Dead Sexy!

other that custom bracket... and some nice braded steele lines and rotors ... what master would one use to get the full potential of theese breaks?
thanks in advance
Cam

no bracket required for these calipers. all you need is.......

282mm x 21mm rotors

3mm spacers behind the rotors

integra type R pads (dc5)

and extended wheel studs if you have to run a spacer because of wheel clearance.

[trancedsailor]

blue wouldn't look right on my car. If they came in black I'd be drooling

[kelsodeez]

Originally Posted by trancedsailor

blue wouldn't look right on my car. If they came in black I'd be drooling

take them apart and have them powdercoated. thats what i was going to do with mine but the blue was just too pretty to mess up.

[polar_bear]

Will they fit 15" ??

Thanks

[kelsodeez]

Originally Posted by polar_bear

Will they fit 15" ??

Thanks

depends on the spoke/offset. before you buy, research to see what wheel will fit. its pretty universal. my buddy with a DA integra had the same setup as me and he had to use 10mm spacers to make the mugen rnr's fit, so did I. volk ce28's will fit with no spacers. just search on honda tech.

[polar_bear]

Originally Posted by kelsodeez

depends on the spoke/offset. before you buy, research to see what wheel will fit. its pretty universal. my buddy with a DA integra had the same setup as me and he had to use 10mm spacers to make the mugen rnr's fit, so did I. volk ce28's will fit with no spacers. just search on honda tech.

ce28n 15x7 offset I guess is +43 ??

[kelsodeez]

Originally Posted by polar_bear

ce28n 15x7 offset I guess is +43 ??

yes sir. fit perfectly. i had to wait two months to get 10mm 4x100 spacers for my mugens so make sure your wheels will fit or you will be stuck with a car up on jackstands.

[spoonek4]

It's pretty much like doing TypeR front brakes upgrades on a Civic/Integra. U cannot use the stock fit brake rotors coz those are regular civic/integra's size which is in 262mm/10.3". U need get a pair of 282mm/11.1" size Prelude rotors (redrilled 4x114.3 to 4x100 pattern) PLUS a set of TypeR size brake pads & a set of 3mm spacer behind the brake rotors.

For wheels clearance wise, there are some 15" wheels out there like these Team Dynamics ProRace1 will clear even with 15x7" +45mm(4x100) offset. U can get them from fastbrakes or good-win-racing.com:



Other choices out there that should clear are(list below are the 15" wheel choices for ITR/CTR, u may need to add another 3mm extra room on offset):
- [15x7] Kosei K1 15x7 (+38mm offset)
- [15x7.5] SSR Competition (+43 offset)
- [15x7] Buddy Club P1 QF (+42 offset)
- [15x7] Real Racing R2 (+45 offset)
- [15x7] 5zigen FN-01R (+42 offset)
- [15x7.5] Advan RG (+42 offset)
- [15x7] TE37 (+35 offset) {clear with a .030 feeler gauge
- [15x7.5] Racing Hart CP-035 (+40 offset )