Skunk2 Racing has been pushing Hondas to go faster and handle better for
over a decade. We've applied that experience to our latest project car the
"Skunk2 Fit R". As we transformed the Fit into a beast, we developed an
aftermarket arsenal for the Fit enthusiast. Our first release is the Skunk2
Lowering Spring but Keep your eyes on us for Fit exhaust, full coilovers and
much more...
Welcome to Fit Freak!
Welcome to Fit Freak,
You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, so please join our community today!
OK, Heres the deal. I have been in contact with the people at Skunk2 that can make this happen for us! This kit is based off of the Kit used for their Fit-R from street tuner challenge. I myself am taking the initiative to make this start moving forward. We had the other interest thread, but now we need to make this happen! The kit i was told is going to be in the $600 range, the cheapest so far!
What I need from you is to post NOTHING MORE than your FF name and real name. When finished posting send me a PM with the same + your phone number. I will be compiling a list and getting it to the Guys at skunk2 that way this kit can launch! Lets get this going guys!
Quote:
Originally Posted by skunk2.com
The kit will include:
Rear Calipers, Pads, Hard brakelines, Soft Brakelines (Stainless Front and Rear), Spindles, Hubs, E-Brake cables.
This kit is straight forward bolt-on replacement that retains the use of ABS and has been tested on the racetrack and on the street.
(Actual product may vary)
1.(JDMchris.com)Chris Aguirre
2.(burningwrek) Dustin Ryan
3.(aliencowboy) Gary Edwards
4.(KoolKevin1107) Kevin Kaveh
5.(manxman) Dave Kermode
6.(sy11580) Stanly Yeung
7.(itfits12) - Bryan Olson
8.(kelsodeez) - Kelsey Mayer
9.(zer0sk8ordie) - frank manharth
10. john brito
11.(Steeldog) Joe D. Lee
12.(junior40er) Adrian
13.(kid vtecnik) Josh Soriano
14.(GD3-Fit) Ricky Granozio
15.(fit4kris) Kris Poff
16.(Wytt) Wytt Lusanandana
17.(Fittogo) Jun Melchor
18.(blazinorange) Ethan Taylor
19.(duheeat) Jason Gourley
20.(EnthusiastMan) John West
21.(EGvsEM) Micheal Mollinea
22.(TOOL) Tyler Hughes
23.(t3chn0rav3rb0y) Mark Destura
24.(thejroisgo) Jason Romine
25.(Fit Ippo) Vu Nguyen
26.(fit2bcrazed) Stephen Dang
OK, Heres the deal. I have been in contact with the people at Skunk2 that can make this happen for us! This kit is based off of the Kit used for their Fit-R from street tuner challenge. I myself am taking the initiative to make this start moving forward. We had the other interest thread, but now we need to make this happen! The kit i was told is going to be in the $600 range, the cheapest so far!
What I need from you is to post NOTHING MORE than your FF name and real name. When finished posting send me a PM with the same + your phone number. I will be compiling a list and getting it to the Guys at skunk2 that way this kit can launch! Lets get this going guys!
1.(JDMchris.com)Chris
2.(burningwrek) Dustin
3.(aliencowboy) Gary
4.(KoolKevin1107) Kevin Kaveh
I'm 6) God Skunk 2 has post about it since like 6 months ago. They said that need 100 people to get in the production, so what is the number of people they looking for this time???
itfits12 - bryan olson
i emailed the guys a while back they said that they were about half way there. i got all excited. but seeing this page i got a bit concerned so whats the news chris... also if you do the math i believe fifty preorders should do just fine to turn a significant profit. Chris being the fitfreak-god that ive respected this far please do some hussling.
Im trying to hussle this bad right now. I can t spill anything yet, but Ill let you guys know everything thats going on, on saturday im sure youll be excited with the news.
bryon i need your phone # same for you kelsey, PM me