"Skunk2 Fit R" on Street Tuner Challenge! - Page 4

sLiVeRwOrM · #61 (**permalink**) 09-11-2006, 07:10 PM

Quote:

Originally Posted by skunk2.com

Wheels: Volk GT-7 18x7.5 +44 Gun metal with polished rim.
Tires: BFG g-Force Sport 215/35 ZR18

No rubbing that I'm aware of.

they already answered that..

budpan10 · #62 (**permalink**) 09-12-2006, 01:53 AM

Quote:

Originally Posted by skunk2.com

Our engine builder said we used Wiseco forged pistons 10:1 compression, 1mm oversized.

I went to several shops ( I live in Indonesia) and they say Wiseco don't make forged pistons for 1.5 l engine. I checked their website and I don't see any for Fit. So, are those custom made for your Skunk2 Fit R only? Can I order those from you guys

? If they make those now, can you give me Wiseco parts number for these : Pistons, Connecting Rods, Main Bearings, and Connecting Rod Bearings. Thanks alot guys. And also, how much boost do you think the stock internal Fit can handle? I'm afraid I could not find those parts here in Indonesia.

skunk2.com · #63 (**permalink**) 09-12-2006, 04:15 PM

Quote:

Originally Posted by budpan10

I went to several shops ( I live in Indonesia) and they say Wiseco don't make forged pistons for 1.5 l engine. I checked their website and I don't see any for Fit. So, are those custom made for your Skunk2 Fit R only? Can I order those from you guys

? If they make those now, can you give me Wiseco parts number for these : Pistons, Connecting Rods, Main Bearings, and Connecting Rod Bearings. Thanks alot guys. And also, how much boost do you think the stock internal Fit can handle? I'm afraid I could not find those parts here in Indonesia.

Yes, the pistons were a custom part for the engine. I'll check with our engine builder on the boost.

skunk2.com · #64 (**permalink**) 09-12-2006, 08:22 PM

Quote:

Originally Posted by budpan10

And also, how much boost do you think the stock internal Fit can handle?

I checked with our engine builder, he said it should be able to take around 7 pounds. More is possible depending on the set-up.

skunk2.com · #65 (**permalink**) 09-12-2006, 08:23 PM

Quote:

Originally Posted by gettinafit

Yeah man tip us off on any cross/ car parts that fit the FIT! What manifold? I also noticed that you are using a rsx TB i think? Switched to cable! easy?

We used a stock manifold with a retrofitted Bseries manifold.

skunk2.com · #66 (**permalink**) 09-12-2006, 08:24 PM

Quote:

Originally Posted by budpan10

I noticed that you are using Quaife LSD. Do they make for Fit already? If not can you tell me which model will work for Fit (RSX, Civic, or else). Thanks guys...

We used an RSX LSD.

Dickson1 · #67 (**permalink**) 09-16-2006, 02:20 AM

Hi im from singapore FJC. Will like to know wat type of front bumper izit.

sLiVeRwOrM · #68 (**permalink**) 09-19-2006, 11:22 PM

I see you have a box of spare exhaust parts in your warehouse..

i think you should do a GB and sell em to us at.. $75-80ea.. so we can free up some space in your warehouse! hehe

pokems23 · #69 (**permalink**) 10-06-2006, 02:19 AM

Anything new?!?!? I haven't heard any progress, and I don't have the Speed Channel.

carlosalicea · #70 (**permalink**) 10-06-2006, 02:24 PM

Quote:

Originally Posted by skunk2.com

We used an RSX LSD.

Do you have to mod anything for fitness, or was a bolt on?

skunk2.com · #71 (**permalink**) 10-09-2006, 06:02 PM

Quote:

Originally Posted by Dickson1

Hi im from singapore FJC. Will like to know wat type of front bumper izit.

Don't know, you'd have to call Autowerks and ask them. We left those decisions to them.

skunk2.com · #72 (**permalink**) 10-09-2006, 06:07 PM

Here's the spec sheet, I still can't post dyno results etc.:

MAKE: Honda
MODEL: Fit
YEAR: 2007
ENGINE Displacement: 1.5-liters
STOCK WHP: 94 TQ: 90
STOCK ENGINE WITH SKUNK2 TURBO SYSTEM – TBA

ENGINE MODIFICATIONS

Skunk2 Racing Turbo System
Turbo: Innovative Turbo Systems with Super Duplex Bearing System with internal wastegate, ITS blow-off valve
- Skunk2 Racing Downpipe
- Skunk2 Racing Turbo Manifold
- RC Injectors
- PWR Skunk2 custom intercooler
- PWR Skunk2 custom radiator
- Skunk2 Racing Throttle Body
- Skunk2 Racing full stainless Mega Power R (60mm) exhaust system
- Magnaflow Catalytic Converter
- Quaife LSD
- Driveshaft Shop custom high-performance level 5 axles
- ACT Custom Clutch
- ACT Custom Flywheel
- Hondata ECU Program
- Magnaflow Hi-Flow Catalytic Converter
- Braille Lightweight Battery
- NGK Sparkplugs: Iridium BKR7EIX
- Torco Oil: SR5 5/20

CHASSIS
Skunk2 Racing Modifications: Lightening/structural integrity

BRAKES
Front: Brembo GT/12” 2-Piece Slotted Rotors/4-Piston Calipers/Stainless Lines
Rear: Skunk2 rear disk conversion with Brembo Slotted Rotors

SUSPENSION
Skunk2 Full Coilovers
Skunk2 Front Sway Bar

WHEELS/TIRES
Volk Racing Wheels: GT-7: 18 X 7.5 +44 Gun Metal with polished rim
BFGoodrich Tires: g-Force Sport 215/35 ZR18
Skunk2 Racing Lightweight Alloy Lug Nuts

INTERIOR
Installation by Form N Function
Front Seats: RaceTech RT1000
RaceTech Alluminum RTB1005M Mounting Brackets
RaceTech RTMAG4 Harnesses
Rear Seats: RaceTech fabric with custom logo embroidery.
Skunk2 Racing harness bar and lateral support
Door Panels: Custom upholstered with RaceTech fabric and suede
Headliner: Custom upholstered with suede
RacePak UltraDash Extreme
Skunk2 Racing Shift Knob

EXTERIOR
Auto Werks all-metal custom widebody modification and bodywork
Auto Werks custom paint
House of Kolor Paint
Vinyl Mayhem: Custom Vinyl Stickers

STEREO/ENTERTAINMENT SYSTEM
Installation: Form N Function Car Audio
Sony Explod Car Audio Components (see list below)

PARTNERS/SPONSORS (Alphabetical Order)
Advanced Clutch Technologies (ACT) - www.advancedclutch.com
American Honda Motor Co., Inc. - www.honda.com
Auto Werks – www.autowerksbodyshop.com
BFGoodrich - www.bfgoodrichtires.com
Braille Auto - www.brailleauto.com
Brembo – www.brembo.com
Form N Function – www.formnfunctioncaraudio.com
House of Kolor - www.houseofkolor.com
Innovative Turbo Systems - www.innovativeturbo.com
Magnaflow - www.magnaflow.com
Miller - www.millerwelds.com
NGK - www.ngk.com
PWR – www.pwr-performance.com
Quaife America - www.quaifeamerica.com
RacePak - www.racepak.com
RaceTech - www.racetech.co.nz & www.racetechseatsna.com
RC Injectors - www.rceng.com
Skunk2 Racing - www.skunk2.com
Sony – www.sony.com
The Drive Shaft Shop - www.driveshaftshop.com
Torco Lubricants – www.torcousa.com
Vinyl Mayhem - www.vinylmayhem.com
Volk Racing Wheels - www.mackinindustries.com

sLiVeRwOrM · #73 (**permalink**) 10-09-2006, 06:55 PM

OMG, is it safe to assume all these things will be avlaible for sale in the near future? Also the dynos will be on air tommorrow?!

sLiVeRwOrM · #74 (**permalink**) 10-10-2006, 11:31 PM

If the car had been tuned and working alittle earlier in the competition I think the Fit would of got 2nd place instead of 3rd

but did I hear correctly that running on all 4cyliders the little 1.5L put out 210hp?! with the 3cyliders it put down 141hp

805FitSport · #75 (**permalink**) 10-11-2006, 04:04 PM

wow, i missed the show, who got 1st place?

gettinafit · #76 (**permalink**) 10-11-2006, 04:07 PM

I saw that the tuned skunk2 Fit is 225hp!

sLiVeRwOrM · #77 (**permalink**) 10-11-2006, 04:08 PM

1st GTI -380hp
2nd Stang - ???hp ( i looked away in shame)
3rd Fit (3cylinders running) 141hp I think w/ all 4cylinders 225hp

gettinafit · #78 (**permalink**) 10-13-2006, 02:44 PM

what does that fit do in the 1/4 mi?

cdnrsx · #79 (**permalink**) 10-28-2006, 11:44 PM

I never saw the last episode but I just checked out the results at http://www.streettunerchallenge.tv and It looks like the Fit got cheated! Anybody see the last episode and want the shed some light on what happened.

gettinafit · #80 (**permalink**) 10-31-2006, 06:13 PM

I never saw dynos, or 1/4 mi times, or track runs? WHERE ARE THEY?? You didn't build this puppy to look at it!