Sport Rear Bumper Lip Removal
 

GD dudes,

How do I remove the OE Sport rear lip? I want to go back to base body.

http://estore.honda.com/honda/images...SLN4B4600B.png


idk if this helps but i tried : /

Good try but me looking at that is like me reading this:

http://www.amalficoastlines.com/images/chinese_text.gif

hehehe :) .........

mike410b, this is really easy. Jack up the rear end. Crawl under the car. Refer to Wafuls diagrams. First, remove 4 X #30 screws with a Phillips, then 2 X #37 bolts with a Spanner (or box wrench), and finally, 5 X #44 fasteners with the tip of a flat blade screwdriver. I was able to do this w/o taking the rear bumper off, although the service manual says to remove the rear bumper. Should take you 15 minutes or less.

Are there visible holes after removal?

Much thanks for the help!

Yes, there are 7 holes that are visible. I covered the holes on mine with 5 strakes and 2 LED lights.

http://imageshack.us/a/img839/4261/img0069rg.jpg http://imageshack.us/a/img708/8829/img0085il.jpg

Ahh, that won't work. Dang.