|
With the Hondas it seems like they don't require all that work, but I will leave it to the Hasport guys to figure it all out and document it. We will certainly find out.
The L engine uses it's own bellhousing type, but it looks like that is swapable with the 6 spd in the Civic Si. Brian @Hasport has more info than I at the moment. |
Fastbrakes swapped over the Fit to the 4 pot 11.6 brakes and rear disc swap this weekend with the help of our friend from Hasport Brian Gillispie.
https://cimg6.ibsrv.net/gimg/www.fit...95cbced085.jpg https://cimg7.ibsrv.net/gimg/www.fit...689e242f1e.jpg https://cimg8.ibsrv.net/gimg/www.fit...c809b14453.jpg https://cimg9.ibsrv.net/gimg/www.fit...e959ddc1c6.jpg |
Is the Fit serving double duty as a rally car? That underbody is filthy!
|
All 4 struts/shocks are leaking, looks like the original ones from Honda, 142k miles on them! Replacing them with BC Racing coil overs in the next couple of weeks, along with lower control arms, Progress rear sway bar. Will be giving it an extensive underside cleaning/scrubbing prior to installing the Ultra Racing chassis braces.
|
In that case, go rally it before it gets a good scrubbing! :D
|
|
Nice! Go with the standard springs/rates or did you go custom with Swift springs?
I think the standard rates are 5k/6k which don't sound bad to me, but haven't tried them. |
Nice. Are you upgrading the control arm bushings and ball joints as well?
|
We should be changing the ball joints to reduce bumpsteer, but don't plan on changing the bushings to anything harder. The car isn't going to be a track car so we want to retain some civility in the ride.
|
We kept the stock spring rates that BC sends to keep it a decent ride. We can always change them later if we need higher rates.
|
Picked up a Civic Si seat to see if it will work in the Fit.
|
Here's the Ultra Racing chassis braces we will be installing on the Fit once the engine swap is completed. The Fit is going to the Hasport shop this week to be used to re-design the K series engine swap brackets, and then the L15 Turbo will be fitted and mounts fabricated.
https://cimg7.ibsrv.net/gimg/www.fit...e0b3325c22.jpg |
We did notice the rear axle bushings were starting to tear so we will have to replace those at some point, probably while it's at Hasport.
|
Nice score on the Ultra Racing braces! I did not know those were still available. Please let us know how the fitment goes.
My understanding on the bushings for the rear beam is that there aren't any that are a true exact fit for a USDM Fit. From what I have been told, the ones linked below are the closest... |
^The UR braces don't fit 100% to our USDM models either. Many of the bolt holes are drilled to JDM/ROW model sizes.
Click here: https://www.fitfreak.net/forums/1st-...ml#post1374728 And yes, those Febest bushings are the best of what's readily available. Custom polyurethane bushings are the only other real option. Click here: https://www.fitfreak.net/forums/1st-...ml#post1377435 |
Thanks for the info on the braces and the bushings. I'm sure I'll be modding the braces to fit, just like I had to do on my FX16.
|
Did SuperPro get the bushing sizes straightened out? I'm in need of them now.
|
Glad to see this thread exists. Also following this on Fastbrakes.
|
Originally Posted by Brian Hasty
(Post 1386122)
Did SuperPro get the bushing sizes straightened out? I'm in need of them now.
|
Nice build man!
Where did the rear disc parts came from? |
| All times are GMT -4. The time now is 03:10 AM. |
© 2024 MH Sub I, LLC dba Internet Brands
