2nd Gen GE8 Specific Fit Engine Modifications, Motor Swaps, ECU Tuning Sub-Forum Threads discussing engine mods/swaps/tuning for the 2nd generation GE8 Honda Fit.

Power Enterprise Co., Ltd. supercharged Honda GE8 FIT

Thread Tools
 
Search this Thread
 
Old May 22, 2013 | 04:30 PM
  #1  
AdvansCPAP's Avatar
Thread Starter
|
Member
Joined: Aug 2012
Posts: 99
From: ca
5 Year Member
Power Enterprise Co., Ltd. supercharged Honda GE8 FIT

Full bolt-FULL KIT for car inspection! Only 5k -Bargain

新型FIT スーパーチャージャーキット ROTREX

Up 30% occurrence catalog value MAX156ps to torque up the entire
powerful acceleration is extended to high rotation smooth.

I made ​​it easy mounting of the number of parts is small.
Mapping optimization using P-MAP (data entered) and large capacity injector that comes with fuel and ignition control,
use the air impulse Ⅱ, I realized a reduction of the intake resistance.
Full warranty of 50,000 km or two years in the supercharger body
maintenance of super charger only oil exchange filter replacement
time exchange ※ oil: 50,000 km or 2 years




Specification POWER (ps) TORQUE (kgm)
Normal 120ps/6600rpm 14.8kgm/4800rpm
ROTREX 156ps/6600rpm 17.8kgm/4800rpm






Charger body 
Large capacity injector
Pulley 
Air impulse Ⅱ
ROTREX for oil Various S / C bracket
P-MAP (installed)
V-belt
Oil cooler
Oil reserve tank 
Piping Silicone hose
Oil hoses
Oil line
ROTREX oil filter
Others: bolt nut color clip nipple adapter various stays, various bracket, hose band, etc.

Guaranteed for two years or 50,000 kilometers to the charger body


 Notes
■ This product is only GE8 KIT. Separate air compressor conformable confirmation thank you to confirm. (Depending on model year.) For GE9 (4WD キ 5AT), please contact us for mounting unconfirmed.
■ Use the high-octane gasoline always.
■ Please use the thing of the heat value of the number 7 or more plug.
■ The engine oil should be used for the turbo (10W40/15W50)
has been the fuel adjustment confirmation in ■ our air impulse Ⅱ.
 
Old May 22, 2013 | 05:01 PM
  #2  
TPColgett's Avatar
Member
iTrader: (2)
Joined: Jul 2008
Posts: 1,952
From: Hayward CA
5 Year Member
First photo shows this on a JDM car...

Just like the "Turbo Kit" I found from CX Racing a while ago I HIGHLY doubt this will be a "bolt on" for a US Spec GE...
 
Old May 22, 2013 | 05:10 PM
  #3  
Wanderer.'s Avatar
Member
iTrader: (1)
Joined: Jun 2011
Posts: 4,363
From: Hayward, CA
Just by looking at the picture 75% sure that intake piping wouldn't clear the brake booster on USDM Fit

Linear 153hp still notbadobama.jpg

I love the engrish
 
Old May 22, 2013 | 05:32 PM
  #4  
13fit's Avatar
Member
Joined: Dec 2012
Posts: 1,911
From: Ft.Hood TX // LaCrosse WI
I dont see enough benefit for the money, if $5k is accurate

That turbine is tiny!

and recommending 10w40 inplace of 0w20 doesnt sound right at all
 
Old May 31, 2013 | 11:32 PM
  #5  
BlackPearlFIT's Avatar
Member
Joined: May 2011
Posts: 315
From: NEOH!
More info please
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
justanewbie
3rd Generation (2015+)
8
Aug 11, 2016 05:24 PM
malraux
2nd Generation GE8 Specific DIY: Repair & Maintenance Sub-Forum
1
Oct 12, 2013 05:38 AM
DiamondStarMonsters
General Fit Talk
16
Dec 19, 2012 12:26 AM
13220831
2nd Gen GE8 Specific Fit Engine Modifications, Motor Swaps, ECU Tuning Sub-Forum
158
Sep 9, 2012 10:44 PM
lcq4blackstar
Fit DIY: Repair & Maintenance
3
Sep 3, 2011 06:25 PM




All times are GMT -4. The time now is 05:37 AM.