Hi all,

I recently picked up some red JDM-style badges for my 2010 Fit. They are cheap eBay specials so they're definitely replicas, but my Fit is a 140k+ mile daily driver so it's happy to get any sort of aesthetic love.

For the front, I ordered 75700-SNW-003 and it appears to be a good fit.

For the rear I ordered 75700-S5T-E01 which I believe should measure about 92mm x 75mm, per what I found in these threads:
https://www.fitfreak.net/forums/2nd-...ts-thread.html
https://www.fitfreak.net/forums/2nd-...m-emblems.html
https://www.fitfreak.net/forums/2nd-...badges-ge.html

However, the one I received is far too large at roughly 120mm x 95mm:




Searching for other listings, it appears that 75700-S5T-E01 is now being used on these larger badges.

Now, the size of an item with a specific part number doesn't just change, but with about 10 years of knockoffs flooding the market, I see how this could happen. I also realize that the threads linked above are all pretty old.

With all that said - is there an alternate or superseded part number that I could search for? Perhaps a newer model than the EP3 Type-R with the correct size badge?