New 2012 cargo shelf on a 2010 fit
 

Just got it in today, ordered the part number with 111 at the end of it which is the 2012 new model, the older ones has the 110 part number at the end of it.

The reason i got this was because I wasn't planning on putting holse into my back seats, because I plan on taking it on and off often. The cargo cover is extremely to put on and off.. just basically put it on top and slide it up some and it locks into place.

I also wanted to make this thread to show you guys how much space gap is there when you are going from non reclined back seats to the reclined back seats:

Attachment 29600
Attachment 29601

So here is what you can see directly about the seats with it non reclined.. the camera is literally about 1 foot or so away from picture.
Attachment 29602

now here it is with the seats reclined back to make the gape smaller.
Attachment 29603

Its a nice product. i used one of the sponsors here to order, and used the discount coupon code for fitfreak members:
BernardiParts.com

seems like they are the cheapest with the fitfreak coupon code

i fabricated my own rear deck, and what i did to close the gap is to use
some velcro tape and attach it to the deck, so that the (non-fuzzy) side
can velcro to the back of the seat.

hope this helps~

I put my 2010's cargo cover into my 2012 and the seats of the 2012 recline further. This may be part of the reason they discontinued the snap-cover.

oh its just the cargo cover. i thought i was a new shelf design that sits in the back. what a very misleading title