Wanna share my Fit..! picture
Thread Starter
|
Member
Joined: Apr 2009
Posts: 20
From: Thailand
Many many thanks for all comment.
My mods data :
Rims is Volk Racing GT-S
Brakes : Front 4 Pots , Rear 2 Pots
Disc : Front 2 pieces 320 mm. Rear 1 piece 300 mm.
Lower by TANABE NF210
PS. My english is not good. I'll try to answer to you all.
Tks...
My mods data :
Rims is Volk Racing GT-S
Brakes : Front 4 Pots , Rear 2 Pots
Disc : Front 2 pieces 320 mm. Rear 1 piece 300 mm.
Lower by TANABE NF210
PS. My english is not good. I'll try to answer to you all.
Tks...
Thread Starter
|
Member
Joined: Apr 2009
Posts: 20
From: Thailand
Member
Joined: Nov 2008
Posts: 533
From: Thailand
Sawadee Krap Kun Fit Rs. Your Fit's looking very nice and the Volk wheels really finish the car off, but how do you keep it so clean.
I notice you have Tanabe NF 210 springs. The Tanabe specs say a 30mm drop. Was the drop the same as the spec or more. My friend is thinking of getting a set, but he's afraid his car might be to low with a Mugen body Kit. What is the measurment from front lip to the ground in mm.
I notice you have Tanabe NF 210 springs. The Tanabe specs say a 30mm drop. Was the drop the same as the spec or more. My friend is thinking of getting a set, but he's afraid his car might be to low with a Mugen body Kit. What is the measurment from front lip to the ground in mm.
Last edited by Lek; May 7, 2009 at 09:00 AM.
Thread Starter
|
Member
Joined: Apr 2009
Posts: 20
From: Thailand
Sawadee Krap Kun Fit Rs. Your Fit's looking very nice and the Volk wheels really finish the car off, but how do you keep it so clean.
I notice you have Tanabe NF 210 springs. The Tanabe specs say a 30mm drop. Was the drop the same as the spec or more. My friend is thinking of getting a set, but he's afraid his car might be to low with a Mugen body Kit. What is the measurment from front lip to the ground in mm.
I notice you have Tanabe NF 210 springs. The Tanabe specs say a 30mm drop. Was the drop the same as the spec or more. My friend is thinking of getting a set, but he's afraid his car might be to low with a Mugen body Kit. What is the measurment from front lip to the ground in mm.
Sawadee Krub P'Lek
I just measure it. It is 19 CM from the front lip to the ground..
approximate 190 mm.
Anyway, I had visited your imade website many many time. Did you plan to
lunch front bumper USDM version? I'm very interrested.
Member
Joined: Nov 2008
Posts: 533
From: Thailand
Sawadeekrap Kun Fit Rs, which means hello in English.
Actually, I am another Lek and not the owner of imade.
I have all my cars tuned by imade because they do a great job and not much more expensive than other places. The Mugen leather seats they fitted feel and look great. My best mod.
I heard that ido or RPM are making this part, maybe you can give them a call ido-aeropart.com not sure about RPM website, but it must be modified before manufacture because the US version is different from our model. Give it 2 or 3 months and it will be everywhere in Thailand. Copy Write protection Hmmm!! What's that?
Tail lights look great. Did you buy them from Imade, 5,800 Baht. Will discount.
Actually, I am another Lek and not the owner of imade.
I have all my cars tuned by imade because they do a great job and not much more expensive than other places. The Mugen leather seats they fitted feel and look great. My best mod.
I heard that ido or RPM are making this part, maybe you can give them a call ido-aeropart.com not sure about RPM website, but it must be modified before manufacture because the US version is different from our model. Give it 2 or 3 months and it will be everywhere in Thailand. Copy Write protection Hmmm!! What's that?
Tail lights look great. Did you buy them from Imade, 5,800 Baht. Will discount.
Last edited by Lek; May 7, 2009 at 10:15 AM.
Thread Starter
|
Member
Joined: Apr 2009
Posts: 20
From: Thailand
Sawadeekrap Kun Fit Rs, which means hello in English.
Actually, I am another Lek and not the owner of imade.
I have all my cars tuned by imade because they do a great job and not much more expensive than other places. The Mugen leather seats they fitted feel and look great. My best mod.
I heard that ido or RPM are making this part, maybe you can give them a call ido-aeropart.com not sure about RPM website, but it must be modified before manufacture because the US version is different from our model. Give it 2 or 3 months and it will be everywhere in Thailand. Copy Write protection Hmmm!! What's that?
Actually, I am another Lek and not the owner of imade.
I have all my cars tuned by imade because they do a great job and not much more expensive than other places. The Mugen leather seats they fitted feel and look great. My best mod.
I heard that ido or RPM are making this part, maybe you can give them a call ido-aeropart.com not sure about RPM website, but it must be modified before manufacture because the US version is different from our model. Give it 2 or 3 months and it will be everywhere in Thailand. Copy Write protection Hmmm!! What's that?
Haha...sorry krub.
I though you're P'Lek imade. Yes, he do a grate job.
Thank you for your informaiton krub. Nice to know you krub.