J's Racing for the GE
hey folks, are J's Racing parts for the GE already available in the States? it seems a bit hard to look for parts especially for the GE except at J'S RACING JAPAN. i wanted to get Strut Bars but one of the shops here in our place told me that what he can get me would be for RHD GEs only and if i would like to put one in my LHD GE, i'd have to drill some holes into my chassis. true or not?
and if there would be anybody here putting some J's Racing stuff in their GE, post up here. i'd like to know which are available already. if you have any comments as well about J's Racing parts, let me know. i kinda feel they're a bit over-priced but aren't everything else is? lol thanks! |
Someone here already narrated his experience with J's Racing's muffler for the GD...if memory serves he said it was a high-priced piece of crap :rotfl: Try searching for it, that thread isn't too old yet.
Maybe you can have the exhaust fabricated locally so you can have better durability while keeping cost down. Just make sure you go to a reputable muffler maker. If J's did have parts for USDM GE8s would they be a guaranteed fit for ours? I mean, we're still basically getting non-USDM units with the steering wheel on the wrong side. :D |
Pao, found the link:
https://www.fitfreak.net/forums/1st-...t=crap+exhaust |
actually J's may NOT know how to weld Titanium properly (very very few shops can) That was the complaint in that thread!
Otherwise I think their quality is good to excellent. |
hey JM, that's why i'd like to know if there are already parts available in the US since most if not all should fit ours. kinda seldom see GE's here at the forums with J's parts too. and yeah, i've read about that already. have no plans of putting an exhaust anyway. i dont like how it looks as well. lol
|
wow dont like the j's muffler that hurts man
YouTube - J's Racing FX 50RS ti muffler GE8 fit i love everything j's makes |
no offense, mate. im just not fond of the design but i did hear it already and it does sound good. design is not my taste only. :(
|
Originally Posted by j1napa0
(Post 772820)
no offense, mate. im just not fond of the design but i did hear it already and it does sound good. design is not my taste only. :(
|
So has anyone answered the question or are we turning into yet another useless forum where questions do not get answered? I am interested in finding a place to get the J's Rear x-brace set-up as well. It requires no cutting of the rear panel. If anyone has any insight let us know. If nothing else I will start contacing shops out in Cali to see if they can get it and ship it.
|
check these guys out:
HOME - SPEEDSTAR.COM they are THE ABSOLUTE JDM importers for Toronto but they do ship to the states as well. Every month they get a whole trailer load of parts coming in. I guarantee you they will be able to get the part for you but it will take a month to come in coming from Japan. |
Originally Posted by Kittengolf
(Post 777834)
So has anyone answered the question or are we turning into yet another useless forum where questions do not get answered? I am interested in finding a place to get the J's Rear x-brace set-up as well. It requires no cutting of the rear panel. If anyone has any insight let us know. If nothing else I will start contacing shops out in Cali to see if they can get it and ship it.
i should have my bars in by the 15th. also can anyone confirm is the j's racing front strut bar fit our usdm version since cusco had to make a left had drive version |
Originally Posted by jdmsneakerhead
(Post 821398)
i justed order my j's racing pillar bar and rear strut bar from Performance Partners International
i should have my bars in by the 15th. also can anyone confirm is the j's racing front strut bar fit our usdm version since cusco had to make a left had drive version |
you might need to relocated the master brake cylinder
|
^thanks guys, looks like i gotta go with the cusco bar in the front then
|
Also check out carbing, they make awesome one piece strut bar that greatly adds rigidity!
|
^ saw their bar but i think it only fits the jdm version
|
got my bars in and will post pics soon, install will be next weekend, waiting for a few more parts
|
bars are in and here is the tread for the install:
https://www.fitfreak.net/forums/2nd-...tml#post828768 |
All times are GMT -4. The time now is 12:30 AM. |
© 2024 MH Sub I, LLC dba Internet Brands