What's the DIY to aiming head lights?
 

Ok guys,

So my first mod I did to my car the was HID's. Ever since i installed, they are aimed low. The brights are at the level where the low beams should be. I know the correct distance to be from the wall of a Home Depot etc that has a level parking lot. At this point, let you bumper pop kiss the wall and back up 20ft. This is where im stumped. I know the right beam is higher than the left so that the right beam is high enough to light up the speed limit and other traffic signs. The left headlight a tad lower to not blind oncoming traffic. At 20ft from the wall on a stock suspension, how many feet should each beam be on the wall?

Thanks for your help.

check this site
might answer your question

Headlight Adjustment