Looking for Relay Diagram
 

I am looking for a relay diagram for the interior fuse box on a 2009 Honda Fit Sport. Any help is greatly appreciated.

this help?
https://cimg9.ibsrv.net/gimg/www.fit...e4db4b991c.jpg

https://cimg0.ibsrv.net/gimg/www.fit...418edfb955.jpg

Hi! newbie here.
I am having trouble with my 2008 2nd Gen Fit side mirrors (possibly broken gear so it doesn't stop rotating), and I'm considering pulling out the fuse/relay responsible for that as I don't want to disassemble the thing yet until my replacement gear arrives.
Problem is, the fuse diagram doesn't indicate at all which fuse is for the side mirrors.
I tried the relays too and per diagram above, the one I should disconnect is relay #1 (leftmost upper corner), but that didn't solve the problem either (i.e. there's still power going to the side mirrors).
Did I interpret the diagram wrong? Or would you have other ideas on how I can solve it?
Thanks in advance!

Trying pulling fuse #10 a 7.5 amp one. In the under dash panel.

You, my dear fellow, are a bloody GENIUS! :thumbups::lock:
HOW??? How did you figure that out??
Fuse #10 says "A/C (if equipped)" in the circuit diagram and never in a million years would I have guessed it to be that one.
In any case, have removed the fuse and the side mirror stopped its rotation.
Aircon doesn't work (i think), but I can live with that as I rarely use it anyways.
You have saved me a lot of trouble and worry, and may good karma return to you tenfold and your car never ever malfunction.

THANKS SO MUCH!! :wavey:

LMAO. Thanks for starting my day off. Glad it at least stopped it. No idea what the problem would be

I just checked the wiring diagram in my shop manual.

Now I just had my first major repair. Replaced my springs and put in new struts and axles.

Guess my wishes for good karma came in too late. Lol. But i hope you have no more major repairs in the next 10 years. :)
The problem with my mirror is probably is possibly a broken gear inside, like what happened to this guy's Fit ( )
Another person also suggested just unplugging the mirror wires, which I will look into.
Anyways, thanks again for your help!

M new struts sound clunky so going back to garage this morning to make sure they ok. It is -9 C right now so could be cold some as well.

Have fun taking mirror apart. Mine are heated like all Cdn ones. I replaced my covers with ones with winkers that was a chore snaking wires down through doors to interior. Later I took mirrors out to peal back the heating element to install winking arrows behind the mirror. Works well.