Unofficial Honda FIT Forums

Unofficial Honda FIT Forums (https://www.fitfreak.net/forums/)
-   2nd Generation GE8 Specific DIY: Repair & Maintenance Sub-Forum (https://www.fitfreak.net/forums/2nd-generation-ge8-specific-diy-repair-maintenance-sub-forum/)
-   -   2010 brake pads (https://www.fitfreak.net/forums/2nd-generation-ge8-specific-diy-repair-maintenance-sub-forum/72499-2010-brake-pads.html)

tamisan 06-13-2012 05:00 PM

2010 brake pads
 
hi guys, it's been only 2 years and i already pulled pas 60k miles on my awesome fit. now it's time for new pads.

Anyone have recommendations on good aftermarket pads? or should i go OEM? I saw on the forum that the older fits are good with 2005 rsx pads but not sure it that will work with my car.

I'm looking for a braking pad with better performance than OEM... if not i'll just go OEM.

thanks

bmxman 06-13-2012 06:50 PM

Unless you track the car just go OEM. I had aftermarket pads and rotors and there really is no noticeable difference when it comes to DD.

tamisan 06-22-2012 01:03 AM

i ended up getting the Hawk HSP pads anyway. after 3 days of driving, i'd have to say they do a better job than OEM. I feel more braking potential. and no brake fade.

nikita 06-25-2012 03:17 PM

Ive used EBC Greenstuff for a high performance steet pad. On the BMW they were quiet, good bite and half the dust of OE. What is the Hawk part #? When I last checked Hawk did not have one for the 2009- Fit, only the early model that shares pad design with other Honda products.

Sloppy_Snood 12-02-2012 07:58 PM

Going to try Raybestos rotors and Akebono ACT1394 ceramic pads on my 70,000-miles odometer Fit. ;) I will post up my experiences with these pads/rotors as they wear. :popc:


All times are GMT -4. The time now is 02:43 AM.


© 2024 MH Sub I, LLC dba Internet Brands