Andypanda 2012 polish metallic ge8
#22
How do you like the diy intake?
#24
I gutted and cut up the box for a DIY intake. I bought 2 of those 3-3/2.5 couplers at autozone and a 3" 90* elbow. For the filter the bottom box part got cut all the way to about an inch under the filter
Sounds good as hell!!
For your lowering needs, I bought Dropzone springs off ebay for $55. they tend to fly around 60-80 though.
I got about 2 inches dropped up front and 1.5, maybe 1.75 down the rear.
Took me about 2.5 hours with hand tools, maybe longer if you add in smoke breaks
Sounds good as hell!!
For your lowering needs, I bought Dropzone springs off ebay for $55. they tend to fly around 60-80 though.
I got about 2 inches dropped up front and 1.5, maybe 1.75 down the rear.
Took me about 2.5 hours with hand tools, maybe longer if you add in smoke breaks
#25
I gutted and cut up the box for a DIY intake. I bought 2 of those 3-3/2.5 couplers at autozone and a 3" 90* elbow. For the filter the bottom box part got cut all the way to about an inch under the filter
Sounds good as hell!!
For your lowering needs, I bought Dropzone springs off ebay for $55. they tend to fly around 60-80 though.
I got about 2 inches dropped up front and 1.5, maybe 1.75 down the rear.
Took me about 2.5 hours with hand tools, maybe longer if you add in smoke breaks
Sounds good as hell!!
For your lowering needs, I bought Dropzone springs off ebay for $55. they tend to fly around 60-80 though.
I got about 2 inches dropped up front and 1.5, maybe 1.75 down the rear.
Took me about 2.5 hours with hand tools, maybe longer if you add in smoke breaks
I'm just waiting for coils, either buddy club or ff type 2s
#31
Finished!
Still working on damping, it's way to stiff I think,
I was able to go real low in the front, tuck tire and all, but I had to big it up all around
So I currently have a 2 1/2 finger cap in front cause I rubbed so bad on my fenders, so till I get a fender roll ill be low, and my rer I have 1 finger gap which was the highest I can go
So till next week stays like that
Still working on damping, it's way to stiff I think,
I was able to go real low in the front, tuck tire and all, but I had to big it up all around
So I currently have a 2 1/2 finger cap in front cause I rubbed so bad on my fenders, so till I get a fender roll ill be low, and my rer I have 1 finger gap which was the highest I can go
So till next week stays like that
#35
Was planning on trading in the car, so I sold most of my parts
Only thing I have left is my retros and my front lip
And now this happened
Just my luck
Guy in back came off ramp real fast, and hit the corolla pretty hard and pushed it towards mine
I'm so bummed out
Only thing I have left is my retros and my front lip
And now this happened
Just my luck
Guy in back came off ramp real fast, and hit the corolla pretty hard and pushed it towards mine
I'm so bummed out
#40
Sucks,
Only thing where I'm bummed is I still owe 3 years
And just knowing it was in a crash I'm like damn, and I hope they don't salvage it, it's going to suck even more
The inside is bad plastics and spare tire don't look to good, and it's all bent