Mr. Hollow's 13 Taffeta White GE8
 

Hey all! I picked my 2013 GE8 up at the end of June and thanks to this forum it made my decision easy. I have been lurking for a few months reading as much as I can.
There is definitely a lot of good information and a lot of good people on here.

Mod list:

Exterior:
Window Tint
OEM Window Visors
OEM Side Body Moldings
LeBra hood bra
JDM Tail lights
Lower grill Vinyl wrap
Custom tilt license plate (No drilling used)
Led license plate bulbs
Rear + Front jdm RS badge
I-vtec sohc decal
LED Dome light
LED Cree Revers lights
LED Cree Parking Lights
Front and Rear red jdm badges
Rear oem mudflaps
3000k HID Fog lights
fatlace Dice valve stem caps
fatlace license plate frame
MUGEN License Plate Bolts
Shark Fin Antenna
MODULO center garnish
MODULO spoiler lips
FormFit Hood Deflector
Mugen JDM window Visors
yellow foglight tint
Black roof vinyl
3rd Brake light flasher
Mugen FITSHUTTLE grill
Sparco Tow Strap
JDM style LED Winker Mirrors
Honda Racing Windshield Banner
JDP CF Duckbill Spoiler

Exhaust:
Megan Racing Axle-back Exhaust

Interior:
Blue LED cup holder light
Blue LED Dome Light
Stickerz
MUGEN Mirror cover
Super Awesome air freshener
"J's Racing" JDM steering wheel emblem
CF steering wheel trim
Tree Frog squash air thing
JDM Red Auto Shift selector
Mugen equipped emblem

Suspension:
Koni Str.t Shocks/struts
Tien S. Tech springs
SBC Camber bolts -1.6
Drag Dr-33 16x7+40
205/50/16 Dunlop Direzza tires
Nrg Tuner Lugs
Progress Rear Sway Bar

Upcoming:
??? Not sure yet.




Newest
https://www.fitfreak.net/forums/atta...ine=1453268512IMG_7558 by zuriel.crisostomo, on Flickr

Looks nice.. Similar route to how I am going.. 2014 taffeta white ge8 here ..

Very interested in how you did the vinyl.. What color/finish.. And did you do it yourself or get it done for you? Trying to figure out what size vinyl is needed to cover that front area

Any close up shots of the vinyl? Curious how the vinyl ends and how the line looks

I'm also in the process of getting the red jdm emblems and the rs badge.. Probably get the front rs badge as well

P.s. Nice accord.. Had a 99 green integra before my fit as well

Looking a lot - nice work like mine.

Rather than vinyl I sprayed the center of my lower grill, also the rear.

Thanks, great minds think alike.

As for the vinyl, I will be honest it does have some rough areas. If you get within a foot you see the wrinkles and such. It was just an experiment because I didn't want spray the bumper black, this way I can remove it.

My advice is purchase some 3M di-noc brand carbon fiber vinyl. The vinyl I used is not official 3m di-noc. The di-noc is really thin and can wrap around corners much easier than the ebay brand I ordered.

Also if you know a website where to buy legit jdm red badges I would love to know. Its hard knowing who has authentic badges vs knock offs. Thanks.

Thanks a lot of the TW GE8 look alike, we all go for the same mods haha.

I thought about spraying the bumper, but with my luck I would screw it up...so I chose vinyl wrap. I plan on eventually buying a jdp front lip and will remove the vinyl.

Added front and rear RS Badges. Looks a little odd without the type r red badges...so those are next.

Attachment 87452
Attachment 87453

How dark is your tint?

The picture makes it look way darker than in real life. The tint shop I used didn't use %, but its dark (not limo dark) on the back windows and medium on the front two.

The back are dark but you can still kinda see through them during the day.

Nice Where did you purchased the hood bra?

Thanks, Ebay Lebra...be warned they are custom made to order, so it will take about a month for you to get it. Message the dealer beforehand.

Looks good now it needs moar low LOL...

haha yeah its coming but not any time soon...just enjoying being able to drive over speed bumps again.

Looks good so far man. I have the same year and color as yours! Just curious to were you bought your tail lights from? I like them on the TW. Thanks.

Thanks! I actually bought the car with them on.

However, I know they can be usually purchased from ebay. They are the stock jdm taillights that come on the jdm Jazz.

Just be warned its not a direct plug-n-play, although there is a really good DIY on youtube to help.

Added the modulo front lips and center garnish + added the form fit hood deflector too.

Attachment 87450

Attachment 87451

Looking good. Where did you get the lips? Your plate holder. Custom made or? Does it hang down at any time? Gives the bumper a clean look.

I purchased them from Rakuten global market through the seller Desir de vivre. It is the modulo front lip kit for the jdm fit shuttle.

Although it is only fits the 12-13 GEs.

It is a custom bracket. I didn't want to drill holes into my bumper. so I bought a straight metal bracket from home depot and drilled holes and ran hardware through it using the existing holes and hardware from the stock license plate holder. Then I purchased the bell tilt license plate and attached that to the straight bracket.

Here is a close up shot.
Attachment 87449

Also it is always angled but you can adjust the angle with an allen wrench.

Thanks for the info and pic.

Been a while since I updated.

Got Mugen visors, JDP rear diffuser (Modelo Paint matched), Black Top Roof Wrap, Yellow tint on Fogs, 3rd Brake Light Flasher.

Anyway here are some pics courtesy of mod Burzpaw aka Zuriel.

Attachment 87447
Attachment 87448

looking good! my fit seems to be following a very similar route to yours.

What kind of vinyl did you use for the fogs? i have yellow vinyl, but wondering if I should buy the thicker stuff from headlight armor

also whats the design on the rear bumper? or is that shadows of some kind playing tricks on my eyes