FS: JDM Fit Illuminated Door Sill + LED AMBIENT Lighting
There is some Japanese booklet but it is not clear so I don't rely on that.
It is not hard to install this,
you just find a female socket on the fusebox that will fit the input male socket on the wiring harness, and it can only fit that one female socket.
then the other little socket on the wiring harness will only fit into the LED ambient light or LED door sill socket.
Now for example if there is a male socket A already plug into the female socket at the fuse box,
then you remove this male socket A and connect it to a female socket on this kit harness, then plug the male socket from this kit harness into the female socket at the fuse box.
basically that male socket A is piggy back to this kit harness.
the only modification if you fit this on a USDM car is one wiring harness to the door sill LED need to be extended simply because this it was design for JDM car with steering wheel (and fuse box) on the right side of the car.
It is not hard to install this,
you just find a female socket on the fusebox that will fit the input male socket on the wiring harness, and it can only fit that one female socket.
then the other little socket on the wiring harness will only fit into the LED ambient light or LED door sill socket.
Now for example if there is a male socket A already plug into the female socket at the fuse box,
then you remove this male socket A and connect it to a female socket on this kit harness, then plug the male socket from this kit harness into the female socket at the fuse box.
basically that male socket A is piggy back to this kit harness.
the only modification if you fit this on a USDM car is one wiring harness to the door sill LED need to be extended simply because this it was design for JDM car with steering wheel (and fuse box) on the right side of the car.
Member
Joined: Jan 2016
Posts: 74
From: JDM
Thanks BMW I am not well with wiring so I have decided to purchase f&f type 2s for my fit was going to install springs but changed my mind and have them sitting around now don't need anymore decorations at this time my friend.
This is made especially for GE version,
but I had inquiry whether this can be fitted on the GD or the latest Honda Fit (GK).
so
If you guys decide to put this on a GD or the latest Honda Fit,
then this is the dimension of this illuminated door sill, so you can check whether it will fit or not, of course I can not guarantee it will fit for a GD or GK because this is design for GE.
on the front one,
the length is 21.5in and the width is 2.75in
on the rear one,
the length is 7in and the width is 2.75in.
but I had inquiry whether this can be fitted on the GD or the latest Honda Fit (GK).
so
If you guys decide to put this on a GD or the latest Honda Fit,
then this is the dimension of this illuminated door sill, so you can check whether it will fit or not, of course I can not guarantee it will fit for a GD or GK because this is design for GE.
on the front one,
the length is 21.5in and the width is 2.75in
on the rear one,
the length is 7in and the width is 2.75in.
Thread
Thread Starter
Forum
Replies
Last Post
braziers
For Sale / Want To Buy / Classified Ads for USED Fit Items
3
Oct 9, 2009 06:48 PM
discoburg
Gauge Interest in a Fit Product or Group Buy
17
Aug 21, 2007 02:45 AM
kelvin Yu
Fit Interior Modifications
8
Jan 15, 2007 06:36 AM
