Who has coilovers on their 09?
 

Hey, I'm curious to see what is out there in coilover land for our 09s. If you don't mind specifying if they are on daily drivers etc that would be great. Pics are great too.
Thanks for the ideas and sorry if there is already a post like this.

try PMing Ghettoboy247 (note). i believe he's running D2's coilover.

There are d2 coilovers here in the states.

In Japan there are a bunch

HKS
Cusco
RSR
A*star
Largus
Silk Road
buddy club

etc etc etc

anyone know where i can get buddyclub coilovers for GE8's?

note's running buddy club N+, they're not out for the GE8 yet, note's prototyping them for buddy club

do you know when they are planning on releasing them and how much?

uhhh probably in the next couple months. price should be in the same range as the ones out right now for the gd3, which got its release delayed. somewhere in the 900-1000 range im assuming.

what rims are on the fit in your sig?? i looked on tire rack and couldn't find SSR rims for a Honda Fit

how about my homie on D2's

http://farm4.static.flickr.com/3466/...b86b1d26_o.jpg

i got mine from tire rack when they discontinued carrying it so got an awesome deal on it. ssr still makes them tho i dont know where to get them...

i really like that stance, and i considered d2's but ive heard many horror stories from word of mouth and other forums about the shocks giving out pre-maturely....

Anyone hear anything about the HKS coilovers for GE8? The information on the HKS website is pretty sparse, and I don't see any mention of them on FF.

its probably for JDM fits and would probably need to be modified

It's on the US HKS site and Assaulttech is selling them, so I think they should fit...

don't buy anything that's pricier than the car itself!
:D

I have those HKS Hipermax S-Compacts.. I didn't get a chance to get pictures because I got rear ended a little after I got them installed -_-

Quick shot after the install..
http://img.photobucket.com/albums/v5...I/IMG_3745.jpg

Was test fitting BBS RS..
http://img.photobucket.com/albums/v5...I/IMG_8569.jpg

http://img.photobucket.com/albums/v5...I/IMG_8576.jpg

and just cause..
http://img.photobucket.com/albums/v5...I/IMG_6116.jpg
HEARTBREAKING!!! ><

EDIT: The gap may look pretty big in the test fitting photos but those BBS were 15s :/ The wheel gap on my 17s are 1 finger in the front and 2 fingers in the rear :x

I believe tanabe has some good coilovers too

I am using BC Racing Coilovers, they are F4k/R5k. they hold the road good and are really firm.

Maybe F3k/R3k would be better for very rough roads.

http://img134.imageshack.us/img134/3836/bccoilovers.jpg

I just heard from a sales rep today that Bilstein are releasing a setup in November for Thailand. I think they are the B14 model with 0/30mm drop. These should be perfect at $850 or so. They may already be available in the US and Europe.

I spoke to Megan racing this week..their GE coilovers are due out before Christmas....

Bilstien Honda Jazz B14

Just checked with Bilstein USA, East Branch, Keith said they were unable to get products from Asian market.....I would have liked to try them, a friend has a set on his Audi, they are superb...even though, I do not think they go low enough for my tastes from the pictures

LAzY BoI .....How much more can you lower your HKS Hipermax Coilovers ?? or is that all the way down ?

Tein just released new coilovers for the GE8,

http://www.advancespeedshop.com/tein-basic-damper-coilover-20092010-honda-gsb80g1as2-p-13519.html

basics / super compacts

Bilstiens lower from 0-30mm and Tein lower 25mm-50mm lower. There is also the option of BC, D2, Magan or Buddy Club Coilovers which lower 0-50mm.

now this is one sexy ass ssm fit ....:hyper:

yeah i know that stance is like the best i ever seen.

Yea man I am trying to save up for those but my patience is killing me !!!

so the teins go just as low as the d2's? anyone know this? if i knew it was atelast as low as hte d2's i would buy the teins but im trying to get the lowest drop without having to do to much modding

What he said ^ I would like to know if the teins drop as low...as D2's...cause I am not fond of them...

InitialDean has teins on his ge .. ask him if he can go lower on his set up .. the way it is in the pics he posted last..the silver ge on d2s is lower

I did ask him, twice, he never replied....d2 does not post specs of drop...

neither does function and form! they dont specify how low they can go! hondatuning magazine is using hte function and forms but they too dont specify anyhting about hte actual coilovers

Are these the real SSR Wheels?

those are work wheels i believe

Just thought i share a few pics

AMR Engineering 8-way rebound adjustable coilovers
AMR Engineering | Product Details

Attachment 46958

Attachment 46959

ima bout to throw some ksports on this week
ill post pics once its done