15x10 -15 (ish) 195/50/R15
Bought Diamond racing rims....
They DO NOT RUB with stock suspention... Well they do a little on the fender liner on the inside at FULLLLLLLL lock but you never see that much lock driving. They DO RUB the rear of the race on the caliper carrier.... but that machined itself down a mm after a trip around the block... Should be okay, after driving a bit today Ill check on em tomorrow. Worst case I get new carriers and order some 15x8's for the front. PS.... A WHOLLLEE LOTTTA MEXI POKE. :) I'm going to look at 3m taping on some Z style over fenders this summer when I get new tires. Pref a 205 wide... XD https://fbcdn-sphotos-a.akamaihd.net...17115691_n.jpg |
o.O wow thats not mexi poke that's ridiculous poke
|
I am a fan of the stanced cars and ones with a little poke... but that looks stupid
|
|
Holy fuck. Needs some custom fender work/wide body.
|
that looks fucking terrible
edit: no offense |
can we get a profile shot of these on and a front corner shot?
go to the same body shop felix69 went to so you can get some overfenders welded on. |
isn't rear camber non-adjustable?
|
^Yes and no. They have the plastic shims...that you put between the hub and the torsion beam (not exact location).
|
Originally Posted by Fit4Trav
(Post 1064587)
^Yes and no. They have the plastic shims...that you put between the hub and the torsion beam (not exact location).
|
Not going to be welding. Car has warranty and I may look at an fr-s this summer/fall.
3m tape and some Z style over fenders with a good 1 inch of poke should be good enough. Its not going to look hella flush or stanced or even remotely make sense. But its going to be fun and bring me and my friends together. On a side note if I can find 4x114 hub to 4x100 wheel adapters I will most likely run these on my project KAE86. Carbed KA24DE in an 86. :D |
Keep us posted on the ZG "pocket style" overfenders. I'm curious if they fit the front fenders. I was looking into various styles for track fitment... and the ZGs are very popular. :popc:
|
Originally Posted by Cipher
(Post 1064631)
On a side note if I can find 4x114 hub to 4x100 wheel adapters I will most likely run these on my project KAE86. Carbed KA24DE in an 86. :D
|
All times are GMT -4. The time now is 03:46 PM. |
© 2024 MH Sub I, LLC dba Internet Brands