Im looking to get specs for the rear axle back exhaust bisimoto had for sale, currently out of stock. looking to get measurments for diameter, length, diameter of chamber attached, length of attached chamber, length from exhaust exit to bend, and if possible the angle of bends (from the stock exhaust to smaller diameter tubing, and the angle of the bend at rear of exhaust. Any help is appreciated!!!

Thanks guys!

 

I have the Bisimoto exhaust, I can get more specs for you in a bit, don't have it on hand right now. It's a great addition to the car though, I recommend it.

 

That would be great if you could get specs for me!

 

Yes please, with the model number and what not so I can look for it on ebay

 

Your not going to find one on ebay, not for a long time being so new, you can find them at bisimotos website...

 

There's one on eBay right now

 

http://www.ebay.com/itm/Bisimoto-Pulse-Chamber-Axle-Back-Exhaust-Muffler-For-2015-Honda-Fit-/111685491335?hash=item1a00f95a87

I almost want to buy it just to hear how it sounds. Buy it now for $260. Go for it! The diameter of this thing looks pretty big.



Edit: Damn....nevermind. Looks like it sold sometime after I posted.

 

I posted this in another thread and my car sounds just like this. Listen with headphones:

 

Love this, thanks for sharing!

 

Whoa, Whoa, WHOA!

First off, thanks for sharing that video.

Secondly, you have a video of your car on the dyno. You know people are going to be asking what the before and after numbers are. So, what were they? For me personally, I don't care what actual numbers are. I only care to see what the hp/tq difference is from before and after each modification. ****Edit**** I watched the video until the end. I see the numbers now. I guess I got excited too soon mid video. Very nice!

Thirdly, ANY more information on that cold air intake? I had not idea Bisimoto even had one. It looks different than the AEM and Weapon R setups.

PLEASE SHARE!

 

This isn't my car, but my car sounds just like it

 

I just got the Bisimoto. Sounds louder but still a bit quiet. LOL

 

Nice driving. It's a little hard to hear with the wind noise though.

 

Yeah it is, but I can hear it a lot better than when I didn't have it. I'll probably mount my go pro on the rear glass next time so you can hear its true beauty.

 

The Fit was screaming for an exhaust. I installed an HKS Silent Hi-Power a few weeks ago and I couldn't be happier. It's loud enough to know it's there, but doesn't drone on the highway. I guess it helps that I have a CVT so 70 MPH the engine is around 2400 RPM.

Hope you post another video with the GoPro.

 

Try putting a piece of scotch tape over the microphone port. It sometimes helps reduce wind noise

 

Here's a better sound clip. Just fast forward.

 

It doesn't sound that loud at all.

 

No, it's not.

 

Hi! I still looking to get measurments for diameter, length, diameter of chamber attached, length of attached chamber, length from exhaust exit to bend, and if possible the angle of bends (from the stock exhaust to smaller diameter tubing, and the angle of the bend at rear of exhaust. I'm from Brazil and we cant found that for sell here. I'm looking for this specs to make one what looks like the original one. Tks