Unofficial Honda FIT Forums

Unofficial Honda FIT Forums (https://www.fitfreak.net/forums/)
-   3rd Generation (2015+) (https://www.fitfreak.net/forums/3rd-generation-2015/)
-   -   What did you do to your GK Fit today? (https://www.fitfreak.net/forums/3rd-generation-2015/87459-what-did-you-do-your-gk-fit-today.html)

robertsmithfromthecure 02-04-2015 12:59 PM

Nice! What did you end up going with? Any more side view shots?

Fitster C. 02-04-2015 09:32 PM

Diy
 

Originally Posted by Fitster C. (Post 1290456)
Took my Fit shopping today for a reasonably-priced blem (paint chip) repair: :confused:

body shop : $275 (hood repaint job), as anticipated; thanks but no thanks :rolleyes:

Visit Obi Wan John, owner at Atlanta Auto Pro (where I go) : either buy a paint pen and fix it, or speak to a parking lot damage touch-up person at a dealership :nod:

Dealership : come Wednesday to speak with the touch-up guru about a paint chip disappearing act, probably around $100. :nod:

We'll talk Wednesday with the guru, and if he/she seems to have more powerful magic than I can get out of a paint pen and the price is OK, that might fly. :yeahthat:Otherwise, I'll buy the paint pen from parts, and wait for a dry, 60+ deg day to extract BMP (best magic possible) out of my paint pen. :yeahthat:

Went to the dealer, touch-up guru didn't show, and the parts dept. guy said if the paint chip catches your fingernail (it does) the only shop option is to sand it down, feather/repaint/blend, refinish etc. for hundreds of dollars, so I'll wait for warmer temps (maybe Saturday with temps in high 50's) and proceed with my new VIN-assigned paint pen. What I have learned:

1. clean the chip area thoroughly.
2. raise the hood until the chips are parallel to the ground (for best paint spread).
3. apply multiple layers, allowing each layer to dry (about an hour each), carefully avoiding excessive paint.
4. Check back with parts department regarding use of clear coat as directed on label paint pen label.
5. wax and buff after at least 48 hours.
:nod:

Fitster C. 02-05-2015 06:19 PM

Sport Mode!!
 
After reading another bit of the genial 'jousting match' in the Manual vs. CVT forum, I decided to try out my Sport Mode today. Found some relatively open stretches of pavement and yee-hee, a little fun was had! :vtec:Had not messed with it since August delivery, because CVT is zippy, and test driving Sport Mode around a parking lot in June had not left much of an impression. I should add that I retired as of Jan 1, and seeking relatively clear stretches of pavement was previously not an option, as my in-town driving was strictly rush hour, and week-end driving was largely road-tripping with my better half.:wiggle:

Nikoatnite 02-05-2015 10:54 PM


Originally Posted by robertsmithfromthecure (Post 1290727)
Nice! What did you end up going with? Any more side view shots?

Unofficial Honda FIT Forums - Nikoatnite's Album: GK5 6MT Pearl White Lowered On H&R's

Fitster C. 02-06-2015 05:12 PM

2 Attachment(s)
OK, I can't find the Forum that can take the credit, but shamed out of commercial car-wash use, Loki-chan and I went shopping today for hands-only car wash stuff. No brushes, microfiber only for soaping up and toweling down, Meguiar's Ultimate Wash & Wax (OK, still a little lazy), and even a new hose to avoid beating up our finish with the old, petrified hose. Will tape the metal hose fitting in case of snake-action, and use the two new buckets exclusively (#1 for clean soapy water & #2 for dirty rinse water) for Fitster C.'s 2-bucket, hands-only car wash. 60 degrees in Atlanta tomorrow and Sunday, so wash tomorrow afternoon, and touch-up paint chips Sunday afternoon! :wiggle:
Attachment 86790
Saturday's Wash; just to prove I did it :D
Attachment 86791

Darkshowdo 02-08-2015 01:17 AM

Got my Blox in!
Its really crazy on how much better it makes the car feel.
I will need to get a Shift Boot Adapter but right now its not to bad using the stock one.
Wanna try and grab some Weathertech mats and maybe a bra for the car.

Anyone actually used those magnetic Hood bra's on ebay?

https://www.fitfreak.net/forums/pict...pictureid=9656

GotFitB13 02-08-2015 09:06 PM

I cleaned the glass on my car today. I used Sparkle on the all the glass to clean it then used Stoner's Invisible Glass + Rain Repellent on the windshield. Is there a good product for the side and rear windows to promote rain beading off the glass? I used to use the rain repellent products, but I don't like the fine beads that can collect. They seem to hard for wind to quickly remove the water.

jhn 02-15-2015 08:05 PM

I washed mine before #snOMG gets here:

http://i1379.photobucket.com/albums/...psoat30u1o.jpg

Darkshowdo 02-15-2015 09:46 PM

Gave the car a bath and put on my I-Vtec stickers, and Scheduled my appointment for tint for Tuesday 15% all around.
https://www.fitfreak.net/forums/pict...pictureid=9664

Fitster C. 02-15-2015 10:04 PM

Gave Loki-chan a smile for the great finish that remains after last week's wash & wax job. But I am amazed at the amount of particulate, air-born junk that has collected all over it, and makes me consider the wisdom of buying a leaf blower just to get it off! :puke: :hyper:

Fitster C. 02-15-2015 10:08 PM


Originally Posted by Darkshowdo (Post 1292542)
Gave the car a bath and put on my I-Vtec stickers, and Scheduled my appointment for tint for Tuesday 15% all around.
https://www.fitfreak.net/forums/pict...pictureid=9664

Looking forward to the same pic after the tint install; looking great!

Darkshowdo 02-17-2015 07:27 PM


Originally Posted by Fitster C. (Post 1292546)
Looking forward to the same pic after the tint install; looking great!

Just a little teaser, Was pouring rain after getting the tint done so i couldn't get a good picture today.

Got 15% Ceramic Tint with front strip.

https://www.fitfreak.net/forums/pict...pictureid=9671

guahan671 02-17-2015 11:54 PM

1 Attachment(s)
lowered my Fit with H&R sport springs today.

Attachment 12345

Darkshowdo 02-18-2015 12:18 AM


Originally Posted by guahan671 (Post 1292911)
lowered my Fit with H&R sport springs today.

http://i40.photobucket.com/albums/e2...sv28w7zle.jpeg

I really wanna do this just worried about Warranty issue in the future.
Also how hard was it to do? or did you pay someone?

guahan671 02-18-2015 12:56 AM

It should only void the warranty for the suspension but i could be wrong. Its not hard to do either but i work on cars for a living so this was easy for me. Also no need for a spring compressor for the fronts not that much spring tension. It took all of 40 minutes to do.

Fitster C. 02-18-2015 12:03 PM

Side-by-side parking lot pic with a stock edition Fit would provide an interesting perspective guahan671.

Fitster C. 02-18-2015 12:06 PM

Will stay tuned for more, Darkshowdo.

Spacecoast Tardis 02-18-2015 12:08 PM

Installed cargo cover.
Ordered Cusco rear sway bar.

Darkshowdo 02-18-2015 08:59 PM

2 Attachment(s)
Before
Attachment 86788


Here's it is after :D
Attachment 86789

cranraspberry 02-18-2015 09:07 PM


Originally Posted by Darkshowdo (Post 1293051)
Here's it is a day after :D

Congrats!! Just got mine tinted on Monday too.


All times are GMT -4. The time now is 11:43 AM.


© 2024 MH Sub I, LLC dba Internet Brands